EVENTS
2012
Trade Shows
- Motor, Drive and Automation Systems 2012 - 3/13/2012 - 3/14/2012 Motor, Drive and Automation Systems 2012 is an international, industry-leading conference focused on the latest economic trends and technical advancements impacting motor, drive and automation systems.
- OFC/NFOEC 2012 - 3/6/2012 - 3/8/2012 OFC/NFOEC 2012 - Booth 1711
- Applied Power Electronics Conference & Exposition 2012 - 2/6/2012 - 2/8/2012 Applied Power Electronics Conference & Exposition 2012 - Booth 120
-
SPIE Photonics West 2012 - 1/24/2012 - 1/26/2012
Experience SPIE Photonics West - the world's leading photonics, laser, and biomedical optics event.
Webinars
- Power Analysis: Precision AC Power Measurements - 03.29.2012 - 3/29/2012 - 3/30/2012 This webinar will cover Precision Power Measurements and Power Factor Measurements.
- Technical Oscilloscope Probe Webinar - 02.21.2012 - 2/21/2012 - 2/22/2012 This one hour webinar is packed with tips about the benefits of using voltage probe basics, applications for probes, real-world circuit probing and current probe basics.
Training
2011
Trade Shows
- Automotive Testing Expo North America - 10/25/2011 - 10/27/2011 Automotive Testing Expo 2011 North America - Booth 5036
-
Solar Power International 2011 - 10/18/2011 - 10/20/2011
Solar Power International (SPI) is North America's largest, most comprehensive solar power trade show and conference. This annual, business-to-business event was the first of its kind in North America and grows bigger and better every year. Visit us at booth 4716
- 2011 FTTH Conference & Expo - 9/28/2011 - 9/30/2011 Come celebrate the 10th Anniversary of FTTH Council at North America's biggest and best event dedicated to all fiber networks.
- Battery Power 2011 - 9/20/2011 - 9/21/2011 Battery Power 2011, an international conference highlighting the latest developments and technologies in the battery industry.
-
IEEE AUTOTESTCON - 9/13/2011 - 9/15/2011
IEEE AUTOTESTCON is the United States' largest conference focused on automatic test systems for US military systems, and has been held annually since 1965.
-
Sensors Expo & Conference 2011 - 6/6/2011 - 6/8/2011
Sensors Expo & Conference is the only industry event in North America exclusively focused on sensors and sensor integrated systems, providing over 25 years of technical innovation and thought leadership!
Webinars
-
Electric Motor Power Measurement & Analysis Webinar - 11/17/2011 - 11/18/2011
Yokogawa and e-Drive Magazine are bringing you a one hour webinar on November 17, 2011 at 11:00am EST. This seminar will provide attendees with a three step process for making precision electrical and mechanical power measurements on AC motors and variable speed drive systems in order to measure and calculate the system power efficiency.
- Introduction to Optical Spectrum Analyzers Webinar - 08/31/2011 - 8/31/2011 View our webinar on many uses of an Optical Spectrum Analyzer. This 45 minute presentation covers the basics of light, the design, measurement, and test applications of an OSA.
- Mechatronics Measurements 101 - 08.30.2011 - 8/30/2011 - 8/31/2011 If you are working in mechatronics, this 1-hour seminar will give you a broad overview of all possible measurements, plus tips and techniques for capturing, visualizing, and analyzing your signals and sensors.
- Electric Motor Testing Webinar - 08.25.2011 - 8/25/2011 This one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- Power Measurement & Harmonic Analysis - 7/21/2011 This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
- Oscilloscope Basics & Key Features of Today's Scopes - 7/19/2011 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
- Power Analysis: Precision AC Power Measurements - 6/23/2011 This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
- Technical Oscilloscope Probe Webinar - 6/21/2011 This one-hour seminar is packed with tips about the benefits of using voltage probe basics, applications for probes, real-world circuit probing and current probe basics.
- Overcoming Noise in Data Acquisition - 6/7/2011 Have you ever captured noisy data to your PC, having to then use software to "massage" the data to try and yield useful results? If so, this seminar will outline the basic sources of electrical noise in data-acquisition systems and explain methods for eliminating them.
- Introduction to Optical Spectrum Analyzers Webinar - 5/26/2011 View our webinar on the many uses of an Optical Spectrum Analyzer. This 45 minute presentation covers the basics of light, the design, measurement, and test applications of an OSA.
- Electric Motor Testing Webinar - 5/19/2011 This one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- Power Measurement & Harmonic Analysis Webinar - 4/21/2011 - 4/22/2011 This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms like from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
-
Power Analysis: Precision AC Power Measurements - 3/24/2011
This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
- Mechatronics Measurements 101 Webinar - 3/23/2011 If you are working in mechatronics, this 1-hour seminar will give you a broad overview of all possible measurements, plus tips and techniques for capturing, visualizing, and analyzing your signals and sensors.
-
Advances in Precision Electrical Power Measurement - 2/15/2011
This short informative Webinar covers new measurement techniques and solutions for making precision power measurements to improve product performance and efficiency designs.
- Technical Oscilloscope Probe Webinar - 1/27/2011 This one-hour seminar is packed with tips about the benefits of using voltage probe basics, applications for probes, real-world circuit probing and current probe basics.
2010
Trade Shows
- Solar Power International 2010 - 10/12/2010 - 10/14/2010 Solar Power International is the largest solar industry event in North America. The three-day conference features dynamic speakers, 1,000+ exhibitors and 27,000+ attendees from 90 countries.
- IEEE AUTOTESTCON 2010 - 9/13/2010 - 9/16/2010 IEEE AUTOTESTCON is the United States' largest conference focused on automatic test systems for US military systems, and has been held annually since 1965. The Conference, whose general theme is The Support Systems Technology Conference, is held in varying cities around the US each fall.
- Sensors Expo & Conference - 6/7/2010 - 6/9/2010 Sensors Expo & Conference is the only Industry Event in North America Exclusively Focused on Sensors and Sensor Integrated Systems.
-
Optical Fiber Communication Conference & Exposition - 3/23/2010 - 3/25/2010
OFC/NFOEC - The World's Largest Optical Communications & Networking Event.
See us at OFC/NFOEC 2010 Booth 1827 -
SPIE Photonics West 2010 - 1/26/2010 - 1/28/2010
Experience SPIE Photonics West - the world's leading photonics, laser, and biomedical optics event.
See us at SPIE Photonics West 2010 Booth 2609.
Webinars
- Technical Oscilloscope Probe Seminar - November 16, 2010 - 11/16/2010 This 1-hour seminar is packed with tips about the benefits of using voltage probe basics, specifications for probes, real-world circuit probing, and current probe basics.
- Mechatronics Measurements 101 Seminar - October 28, 2010 - 10/28/2010 If you are working in mechatronics, this 1-hour seminar will give you a broad overview of all possible measurements, plus tips and techniques for capturing, visualizing, and analyzing your signals and sensors.
- Digital Oscilloscope Power Analysis Webinar - 10/21/2010 In this 1-hour seminar you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies.
- Oscilloscope Basics & Key Features of Today's Scopes - September 30, 2010 - 9/30/2010 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
- Technical Oscilloscope Probe Seminar - September 16, 2010 - 9/16/2010 This 1-hour seminar is packed with tips about the benefits of using voltage probe basics, specifications for probes, real-world circuit probing, and current probe basics.
- Power Measurement & Harmonic Analysis - August 19, 2010 - 8/19/2010 This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
- Electric Motor Testing Seminar - July 22, 2010 - 7/22/2010 The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
-
Power Analysis: Precision AC Power Measurements - June 24, 2010 - 6/24/2010
This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
Who Should Attend
- Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives,
- Power Conversion Devices, Power Supplies & Lighting Systems.
- Test Engineers Responsible for Testing Power Devices.
- Electric Transportation Systems Engineers.
- Power Quality Engineers Involved with Product Conformance Testing
- Power Measurement & Harmonic Analysis: April 8, 2010 - 4/8/2010 - 4/9/2010 This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
- Electric Motor Testing Seminar March 11, 2010 - 3/11/2010 This one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- Overcoming Noise in Data Acquisition: The Seven Deadly Sources, and How to Improve the Measurement Performance of Any System - February 23, 2010 - 2/23/2010 Have you ever captured noisy data to your PC, having to then use software to "massage" the data to try and yield useful results? If so, this seminar will outline the basic sources of electrical noise in data-acquisition systems and explain methods for eliminating them.
- Digital Oscilloscope Power Analysis Seminar - February 18, 2010 - 2/18/2010 As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies. Topics covered will include switching loss, in-rush current, safe operating area, dynamic ON resistance, harmonics, power factor, and more. Test equipment requirements will be covered as well.
-
Power Analysis: Precision AC Power Measurements - February 11, 2010 - 2/11/2010
This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
Who Should Attend
- Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives, Power Conversion Devices, Power Supplies & Lighting Systems.
- Test Engineers Responsible for Testing Power Devices.
- Electric Transportation Systems Engineers.
- Power Quality Engineers Involved with Product Conformance Testing
- Oscilloscope Basics & Key Features of Today's Scopes - January 21, 2010 - 1/21/2010 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
- FTTH OTDR Testing for Networks with 32:1 Splitters - 1/19/2010 Having the ability to easily and accurately test FTTH networks through splitters lowers installation and maintenance costs.
-
Technical Oscilloscope Probe Seminar - January 12, 2010 - 1/12/2010
Who Should Attend:
Engineers and Technicians who:
- Are new to testing signals with oscilloscopes
- Make measurements at 50 MHz or higher
- design or test power supplies
- desire to improve test result repeatability
- wish to more fully utilize existing scopes by choosing the best probe for a given application.
2009
Trade Shows
Webinars
- 40G Client and Line Side Testing Basics 12/15/09 - 12/15/2009 The increased use of 40G client and network interfaces has driven new Protocol and Performance verification. This session will review 40G Client interface testing using SONET/SDH/OTN protocols over NRZ optical interfaces, as well as network testing of OTN and Ethernet over OTN using DPSK and DQPSK optical interfaces.
- UART, I2C/SPI/SM, CAN/LIN/Flexray: Tips & Tricks for Serial bus Protocol Analysis & Physical layer Troubleshooting using MSOs Webinar - 11/17/2009 Serial data buses have become increasingly common, core components of most electronic designs. As a design or test engineer, you presently need to use a protocol analyzer, logic analyzer, digital oscilloscope, or a combination of all three in order to debug serial bus signals. However, none of these instruments by themselves give you a complete picture of the physical and protocol layers-until now.
-
Technical Oscilloscope Probe Seminar November 5, 2009 - 11/5/2009
Who Should Attend:
Engineers and technicians who:
- are new to testing signals with oscilloscopes
- make measurements at 50 MHz or higher
- design or test power supplies
- desire to improve test result repeatability
- wish to more fully utilize existing scopes by choosing the best probe for a given application.
- Digital Oscilloscope Power Analysis Seminar October 13, 2009 - 10/13/2009 As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies.
- Electric Motor Testing Seminar October 8, 2009 - 10/8/2009 The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- Advances in Mixed Signal Oscilloscopes - 9/29/2009 Yokogawa, a global leader and pioneer in digital oscilloscopes, invites you to attend a technical seminar sharing the latest advances in mixed signal oscilloscope technologies. It will discuss the theory and applications of anomaly/glitch detection, waveform characterization, signal enhancement, serial bus analysis, special mixed signal considerations, and more.
- Power Measurement & Harmonic Analysis: Applications using the latest Digital Power Analyzers - 9/24/2009 Power Measurement & Harmonic Analysis Seminar is the second part from the Yokogawa T&M University series on precision AC power measurements. This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms like from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
- Oscilloscope Basics & Key Features of Today's Scopes September 22, 2009 - 9/22/2009 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
-
Technical Oscilloscope Probe Seminar September 10, 2009 - 9/10/2009
Who Should Attend:
Engineers and technicians who:
- are new to testing signals with oscilloscopes
- make measurements at 50 MHz or higher
- design or test power supplies
- desire to improve test result repeatability
- wish to more fully utilize existing scopes by choosing the best probe for a given application.
-
When 8-bit Scopes Aren't Enough: High-Resolution Isolated, Mixed-Signal Instruments for Electro-Mechanical Measurements Webinar August 25, 2009 - 8/25/2009
We all know what a difference the right tool can make. While traditional 8-bit oscilloscopes are the right choice in many situations, they often are not the best choice when making mixed signal, power and/or electro-mechanical measurements.
What you will learn in this seminar:
- Understand differences between oscilloscopes, recorders and hybrid instruments.
- Identify key instrument specifications for electro-mechanical applications.
- Why hybrid instruments are often the best choice.
- Discuss specialized functions designed for electro-mechanical applications.
-
Power Analysis: Precision AC Power Measurements August 2009 - 8/20/2009
This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
Who Should Attend
- Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives, Power Conversion Devices, Power Supplies & Lighting Systems.
- Test Engineers Responsible for Testing Power Devices.
- Electric Transportation Systems Engineers.
- Power Quality Engineers Involved with Product Conformance Testing.
- Electric Motor Testing Webinar - 7/16/2009 The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- Technical Oscilloscope Probe Seminar - 7/7/2009 Today’s engineers are pressured to test high-speed signals in a reliable and timely fashion in a fast-moving environment of design verification and manufacture test. Probing is the front line of that testing; and, having the right knowledge in probing is indispensable for accurate and reliable test results. This seminar will provide you with that necessary knowledge and insight.
- Overcoming Noise in Data Acquisition: The Seven Deadly Sources, and How to Improve the Measurement Performance of Any System - 6/16/2009 Overcoming Noise in Data Acquisition: The Seven Deadly Sources, and How to Improve the Measurement Performance of Any System
- Digital Oscilloscope Power Analysis Seminar - 6/11/2009 As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies.
-
Power Analysis: Precision AC Power Measurements - 5/14/2009
Who Should Attend
- Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives, Power Conversion Devices, Power Supplies & Lighting Systems.
- Test Engineers Responsible for Testing Power Devices.
- Electric Transportation Systems Engineers.
- Power Quality Engineers Involved with Product Conformance Testing.
- Introduction and Use of an Optical Spectrum Analyzer - 5/12/2009 Sign up now for our free training on the many uses of an Optical Spectrum Analyzers. This one hour presentation covers the basics of light, the design, measurement, and test applications of an OSA. Initial subject matter will cover the nature of light and some key aspects of light propagation. In addition this seminar will also cover the design of a Monochrometer, an assortment of test conditions and configurations for measurement of various Device Under Test (DUT). Unique benefits of the Yokogawa line of Optical Spectrum Analyzers will be highlighted at the end of the presentation as well as a head to head performance comparison.
- Intro & Use of an Optical Spectrum Analyzer - 5/12/2009 This one hour presentation covers the basics of light, the design, measurement, and test applications of an OSA. Initial subject matter will cover the nature of light and some key aspects of light propagation.
- When 8-bit Scopes Aren't Enough: High-Resolution, Isolated, Mixed-Signal Instruments for Electro-Mechanical Instruments - 5/7/2009 We all know what a difference the right tool can make. While traditional 8-bit oscilloscopes are the right choice in many situations, they often are not the best choice when making mixed signal, power and/or electro-mechanical measurements. There exists in the market, instruments designed with these applications in mind. Hybrid instruments offer capabilities not found in traditional 8-bit oscilloscopes. These capabilities include: high-resolution (up to 16-bit) and isolated inputs, very long memory for long-term recording and support for a variety of signal inputs (RMS coupling, temperature, strain, frequency-voltage, accelerometers, etc.)
- Electric Motor Testing Seminar - 4/16/2009 The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- Mixed Signal Oscilloscope and Logic Analysis Seminar - 4/14/2009 If you are an embedded systems design or test engineer working with micro-controllers, DSPs, or FPGAs, you won't want to miss this seminar. Designing with embedded ICs in your circuit requires an ever larger library of test tools to measure and troubleshoot on-chip A/D and D/A sections, serial and parallel digital busses, and other assorted digital control signals. As a design or test engineer you would like to have the most versatile tool possible.
-
Fiber to the Home OTDR Testing - 4/2/2009
Fiber to the Home OTDR Testing
Yokogawa will discuss challenges of fiber installation and maintenance with regards to FTTH networks. Our years of international experience in deploying, testing and maintaining these networks has provided key insights to the challenges and solutions you will face. Join us as we cover OTDR testing in a FTTH environment. - Oscilloscope Basics & Key Features of Today's Scopes - 3/19/2009 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
2008
Webinars
- When 8-bit Scopes Aren't Enough: High-Resolution Isolated, Mixed-Signal Instruments for Electro-Mechanical Measurements Webinar - 11/13/2008 We all know what a difference the right tool can make. While traditional 8-bit oscilloscopes are the right choice in many situations, they often are not the best choice when making mixed signal, power and/or electro-mechanical measurements.
- Introduction & Use of an Optical Spectrum Analyzer Webinar - 10/14/2008 Sign up now for our free training on the many uses of an Optical Spectrum Analyzers. This one hour presentation covers the basics of light, the design, measurement, and test applications of an OSA.
- Power Measurement & Harmonic Analysis: Applications using latest Digital Power Analyzers - 8/26/2008 Power Measurement & Harmonic Analysis Seminar is the second part from the Yokogawa T&M University series on precision AC power measurements.
- UART, I2C/SPI/SM, CAN/LIN/Flexray: Tips & Tricks for Serial bus Protocol Analysis & Physical layer Troubleshooting using MSOs Webinar - 7/24/2008 Serial data buses have become increasingly common, core components of most electronic designs. As a design or test engineer, you presently need to use a protocol analyzer, logic analyzer, digital oscilloscope, or a combination of all three in order to debug serial bus signals. However, none of these instruments by themselves give you a complete picture of the physical and protocol layers—until now.
- UART, I2C/SPI/SM, CAN/LIN/Flexray: Tips & Tricks for Serial bus Protocol Analysis & Physical layer Troubleshooting using MSOs - 4/17/2008 Serial data buses have become increasingly common, core components of most electronic designs. As a design or test engineer, you presently need to use a protocol analyzer, logic analyzer, digital oscilloscope, or a combination of all three in order to debug serial bus signals. However, none of these instruments by themselves give you a complete picture of the physical and protocol layers—until now.