Why Can't the DL9000 / SB5000 Display Harmonics?

Please make sure to set Time/Div to a setting which will display a minimum of sixteen (16) Cycles.     
 
To setup the instrument for harmonic analysis:
  1. Press the WINDOW1 key
  2. Press the Type soft key
  3. Select Harmonics
  4. Turn the T/Div knob until it is at least 16 cycles (IEC harmonics requires 16 cycles minimum)    
               
        

Related Products & Solutions

DL9000 DSO Series

500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.

Mixed Signal Oscilloscopes

A mixed signal oscilloscope is an instrument enabling the simultaneous, time correlated observations and analysis of analog with digital (logic) signals, to establish causal relationships between the various areas of a device's electronics. They are purpose-built tools for troubleshooting electrical anomalies, measuring parametric values, and monitoring cause and effect relationships between signals.

Oscilloscopes

Oscilloscopes are a common type of test instrument used to capture, analyze, and troubleshoot electrical or real world physical signals. Oscilloscopes observe the change of electrical signals over time, continuously graphed on a display as voltage or amplitude vs. time.

Top