Yokogawa - Products

701970 DC power cord

For the DC power supply model (/DC). Cigarette lighter plug type.

B9918EZ Soft probe case for DL1600,1700E series

For storing accessories (probes, etc). It can be attached on the side of the DL1600 and 1700E series.

701966 Printer roll paper for DL750P and SL1400

Quality paper for the DL750P and the SL1400.

701919 Probe Stand

Using a probe stand with a flexible arm and heavy base to hold and stabilize probes can simplify circuit board testing.

B8506WA Measurement Lead Set

2 pieces (red and black) in 1 set.
Length: 1.5 m, Rating: 80 A

701948 Plug on Clip

701948 Plug on Clip

For the Isolated Probe

B9852HF Basic accessories set for the 701941 probe

The B9852HF contains the following eleven(11) kinds of accessories: Insulation cap, IC cap, BNC adapter, Rigid tip, Spring tip (Ø: 0.80 mm), Spring tip (Ø: 0.38 mm), Ground spring, Adjustment tool, Pincher tip, Standard ground lead, Color coding rings. PBL5000.

701915 Browser attachments

This attachment set can be used with PBA2500 and PBD2000.

701936 Deskew correction signal source

701936 Deskew correction signal source

Improve switching-loss measurements by eliminating skew. The 701936 Deskew Correction Signal Source accommodates both clamp-on current probes and through-type ‘CT' Current Transformers.

701962 All-Purpose Instrument Cart

All-purpose rolling instrument cart.

701954 Alligator clip (dolphin type)

Set contains one black and one red clip.1000 Vrms-CAT II.

701964 Soft carrying case for DL1600/DL1700E series

Three pockets are provided for storing accessories and the user’s manual. Roomy enough to store the DC power supply model and the battery box.

B9988AE Printer paper

Quality paper for the DLM2000/DLM4000/DL850/DL6000/DL9000 and DL750

701901 1:1 BNC safety adapter lead

1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.

D-sub cable (5 m) included. Supports Shunt-Cal.

366973 GO/No-Go cable

This cable is used to connect an external device, however, do not use this cable for purposes other than DL750/1600/1700/1700E/7400 GO/NO-GO judgement.

701952 Speaker cable

For playing voice memos.

701961 Deluxe Instrument Cart

Deluxe instrument cart with adjustable shelf positioning.

701967 Soft carrying case for DL750P and SL1400

Three pockets are provided for storing accessories and the user’s manual.

366924 BNC cable

A 1 m long (366924) and

701951 Earphone microphone

For recording and playing voice memos.

758921 Fork terminal adapter

Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip
1000 Vrms-CAT II.

701968 Soft carrying case for DLM4000

Three pockets are provided for storing accessories and the user’s manual.

700976 50 Ω terminator

Used to connect an oscilloscope having a 1M-ohm input to a probe with a 50-ohm output. It is required when using the 701920 and 701922 probes with the DL1600 series.

701906 Long Test Clip

B9969ET Soft case for the DL7400 series

Ideal for storing accessories (probes, etc).

701963 Soft carrying case for DL850, DL850V and DL750

Three pockets are provided for storing accessories and the user’s manual.

701960 Compact Instrument Cart

Compact instrument cart.

B9946EB Soft case for the DL750

Convenient and practical for storing accessories (probes, etc). It can be attached to the DL750’s front panel protective cover.

701912/13/14 Active Probe

701912 PBA1000 Active Probe, 25Vp, 2.0GHz, 10:1, 100kΩ, w/ Yokogawa Probe Interface
701914 PBA1500 Active Probe, 25Vp, 1.5GHz, 10:1, 100kΩ, w/ Yokogawa Probe Interface
701913 PBA2500 Active Probe, 25Vp, 2.5GHz, 10:1, 100kΩ, w/ Yokogawa Probe Interface

701969 Rack mount kit for DLM4000

Rack mount kit for DLM4000 series.
EIA/JIS sandard compliant.

B9852MJ Power cable

The B9852MJ cable supplies power to the 700924, 700925 and 701921 differential probes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)

* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or 9VDC"at the probe input power connector.

700940 NDIS connector cable

A 1.5 m long connector-to-connector adapter cable complying with NDIS-MIL C26482. Used to connect a MIL-standard cable to the strain module

701934 Probe Power Supply

A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.

A1002JC NDIS connector

An NDIS connector for direct connection to a strain module.

701959 Safety mini clip (hook type)

Set contains one black and one red clip. 1000 Vrms-CAT II.

366961 Measurement lead

A subassembly of 1.2 m long test leads with alligator-clip adapters. Use only for circuits having voltage levels no greater than 42 V.

701971 DC power cord

For the DC power supply model (/DC). Allgator clip type.

366925 - BNC cable

BNC cable
BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

B9850NX DL printer paper

Quality paper for the DLM6000/DL9700/DL9500/DL1700(E)/DL1600/DL1500 and DL7400

701950 Hard carrying case for DL1600/DL1700E series

Hard type carrying case.

366926 BNC cable

A 1 m long BNC-alligator clip cable. Use only for circuits having voltage levels no greater than 42 V.

B8051DP for DL7400 series

A transparent cover to protect the front panel.

701975 50 ohm DC block

This DC block can be used to remove the DC component from an incoming signal. Use this block if you want to remove bias voltage from reaching the PBL5000 probe.