活动与培训
2011
网上研讨会
- 光谱分析仪网络课程介绍 - 08/31/2011 - 2011/8/31 观看我们有关光谱分析仪众多用途的网络课程。此45分钟课程涵盖了有关OSA的光学、设计、测量和测试应用的基本知识。
- 机电测量101 - 08.30.2011 - 2011/8/30 - 2011/8/31 如果您在机电行业工作，则此一小时讲座将为您提供所有可能测量的整体概述，以及有关捕捉、可视化和分析信号及传感器的提示和技术。
- 电机测试网络课程 - 08.25.2011 - 2011/8/25 此一小时讲座将介绍对交流电机和变速驱动器进行高精度电功率测量。
- Power Measurement & Harmonic Analysis - 2011/7/21 This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
- 示波器基础及当前示波器主要特点 - 2011/7/19 对于任何希望了解时域中电信号特性的人而言，示波器对他们都是一种极为重要的工具。此一小时讲座将对示波器进行整体概述，重点介绍最新示波器的主要规格和一些高级波形分析功能。
- Power Analysis: Precision AC Power Measurements - 2011/6/23 This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
- Technical Oscilloscope Probe Webinar - 2011/6/21 This one-hour seminar is packed with tips about the benefits of using voltage probe basics, applications for probes, real-world circuit probing and current probe basics.
- 客服数据采集中的噪声 - 2011/6/7 您是否曾经将噪声数据捕捉到PC中，然后不得不使用软件来“处理”此数据，以尝试并生成有用的结果？ 如果是这样，本讲座将为您概述数据采集系统中电噪声的基本来源，并介绍消除噪声的方法。
- 光谱分析仪网络课程介绍 - 2011/5/26 观看我们有关光谱分析仪众多用途的网络课程。此45分钟课程涵盖了有关OSA的光学、设计、测量和测试应用的基本知识。
- 电机测试网络课程 - 2011/5/19 此一小时讲座将介绍对交流电机和变速驱动器进行高精度电功率测量。
- 功率测量及谐波分析网络课程 - 2011/4/21 - 2011/4/22 此一小时讲座主要包括对各种失真波形(例如来自电源、电子镇流器和变速PWM电机驱动器的失真波形)进行精确功率测量的提示和技术。我们还将介绍测量和分析不同功率波形的谐波含量的方法。
-
功率分析：高精度AC功率测量 - 2011/3/24
此一小时讲座将介绍高精度功率测量和功率因数测量。
- 机电测量101讲座 - 2011/3/23 如果您在机电行业工作，则此一小时讲座将为您提供所有可能测量的整体概述，以及有关捕捉、可视化和分析信号及传感器的提示和技术。
-
精确电功率测量的发展 - 2011/2/15
此网络课程介绍了进行精确功率测量的新测量技术和解决方案，用以提高产品性能和设计效率。
- 示波器探头网络课程 - 2011/1/27 此一小时讲座提供很多提示，包括使用电压探头优点的基本介绍、探头的应用、实际电路探测以及电流探头基本知识。
2010
展销会
网上研讨会
- Technical Oscilloscope Probe Seminar - November 16, 2010 - 2010/11/16 This 1-hour seminar is packed with tips about the benefits of using voltage probe basics, specifications for probes, real-world circuit probing, and current probe basics.
- Mechatronics Measurements 101 Seminar - October 28, 2010 - 2010/10/28 If you are working in mechatronics, this 1-hour seminar will give you a broad overview of all possible measurements, plus tips and techniques for capturing, visualizing, and analyzing your signals and sensors.
- 数字示波器功率分析网络课程 - 2010/10/21 在此一小时讲座中，我们将向您介绍用来评估开关模式电源所必需的多种专业功率测量。
- Oscilloscope Basics & Key Features of Today's Scopes - September 30, 2010 - 2010/9/30 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
- Technical Oscilloscope Probe Seminar - September 16, 2010 - 2010/9/16 This 1-hour seminar is packed with tips about the benefits of using voltage probe basics, specifications for probes, real-world circuit probing, and current probe basics.
- Power Measurement & Harmonic Analysis - August 19, 2010 - 2010/8/19 This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
- Electric Motor Testing Seminar - July 22, 2010 - 2010/7/22 The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
-
Power Analysis: Precision AC Power Measurements - June 24, 2010 - 2010/6/24
This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
Who Should Attend
- Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives,
- Power Conversion Devices, Power Supplies & Lighting Systems.
- Test Engineers Responsible for Testing Power Devices.
- Electric Transportation Systems Engineers.
- Power Quality Engineers Involved with Product Conformance Testing
- Power Measurement & Harmonic Analysis: April 8, 2010 - 2010/4/8 - 2010/4/9 This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
- Electric Motor Testing Seminar March 11, 2010 - 2010/3/11 This one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- Overcoming Noise in Data Acquisition: The Seven Deadly Sources, and How to Improve the Measurement Performance of Any System - February 23, 2010 - 2010/2/23 Have you ever captured noisy data to your PC, having to then use software to "massage" the data to try and yield useful results? If so, this seminar will outline the basic sources of electrical noise in data-acquisition systems and explain methods for eliminating them.
- Digital Oscilloscope Power Analysis Seminar - February 18, 2010 - 2010/2/18 As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies. Topics covered will include switching loss, in-rush current, safe operating area, dynamic ON resistance, harmonics, power factor, and more. Test equipment requirements will be covered as well.
-
Power Analysis: Precision AC Power Measurements - February 11, 2010 - 2010/2/11
This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
Who Should Attend
- Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives, Power Conversion Devices, Power Supplies & Lighting Systems.
- Test Engineers Responsible for Testing Power Devices.
- Electric Transportation Systems Engineers.
- Power Quality Engineers Involved with Product Conformance Testing
- Oscilloscope Basics & Key Features of Today's Scopes - January 21, 2010 - 2010/1/21 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
- FTTH OTDR Testing for Networks with 32:1 Splitters - 2010/1/19 Having the ability to easily and accurately test FTTH networks through splitters lowers installation and maintenance costs.
-
Technical Oscilloscope Probe Seminar - January 12, 2010 - 2010/1/12
Who Should Attend:
Engineers and Technicians who:
- Are new to testing signals with oscilloscopes
- Make measurements at 50 MHz or higher
- design or test power supplies
- desire to improve test result repeatability
- wish to more fully utilize existing scopes by choosing the best probe for a given application.
2009
网上研讨会
- 40G Client and Line Side Testing Basics 12/15/09 - 2009/12/15 The increased use of 40G client and network interfaces has driven new Protocol and Performance verification. This session will review 40G Client interface testing using SONET/SDH/OTN protocols over NRZ optical interfaces, as well as network testing of OTN and Ethernet over OTN using DPSK and DQPSK optical interfaces.
- UART、I2C/SPI/SM、CAN/LIN/Flexray：MSO网络课程为您提供串行总线协议分析及物理层故障排除的提示和技巧 - 2009/11/17 串行数据总线变得日益通用，已经成为大多数电子设计的核心部件。作为设计或测试工程师，您当前需要使用逻辑分析仪、协议分析仪、数字示波器，或者结合使用所有三种设备以用于调试串行总线信号。但截止目前，单独使用这三种仪器中的任何一种，您都无法全面了解物理层和协议层。
-
Technical Oscilloscope Probe Seminar November 5, 2009 - 2009/11/5
Who Should Attend:
Engineers and technicians who:
- are new to testing signals with oscilloscopes
- make measurements at 50 MHz or higher
- design or test power supplies
- desire to improve test result repeatability
- wish to more fully utilize existing scopes by choosing the best probe for a given application.
- Digital Oscilloscope Power Analysis Seminar October 13, 2009 - 2009/10/13 As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies.
- Electric Motor Testing Seminar October 8, 2009 - 2009/10/8 The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- 混合信号示波器的发展 - 2009/9/29 作为数字示波器领域的全球领导者和开拓者，Yokogawa邀请您参加此技术讲座，共享混合信号示波器技术的最新发展动态。本讲座将讨论异常/突波检测、波形特性、信号增强、串行总线分析、特殊混合信号注意事项等项目的理论及应用。
- Power Measurement & Harmonic Analysis: Applications using the latest Digital Power Analyzers - 2009/9/24 Power Measurement & Harmonic Analysis Seminar is the second part from the Yokogawa T&M University series on precision AC power measurements. This 1-hour seminar is packed with tips and techniques for making accurate power measurements on distorted waveforms like from a Power Supply, Electronic Ballast and Variable Speed PWM Motor Drive. We will also cover methods for making and analyzing the harmonic content of various power waveforms.
- Oscilloscope Basics & Key Features of Today's Scopes September 22, 2009 - 2009/9/22 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
-
Technical Oscilloscope Probe Seminar September 10, 2009 - 2009/9/10
Who Should Attend:
Engineers and technicians who:
- are new to testing signals with oscilloscopes
- make measurements at 50 MHz or higher
- design or test power supplies
- desire to improve test result repeatability
- wish to more fully utilize existing scopes by choosing the best probe for a given application.
-
When 8-bit Scopes Aren't Enough: High-Resolution Isolated, Mixed-Signal Instruments for Electro-Mechanical Measurements Webinar August 25, 2009 - 2009/8/25
We all know what a difference the right tool can make. While traditional 8-bit oscilloscopes are the right choice in many situations, they often are not the best choice when making mixed signal, power and/or electro-mechanical measurements.
What you will learn in this seminar:
- Understand differences between oscilloscopes, recorders and hybrid instruments.
- Identify key instrument specifications for electro-mechanical applications.
- Why hybrid instruments are often the best choice.
- Discuss specialized functions designed for electro-mechanical applications.
-
Power Analysis: Precision AC Power Measurements August 2009 - 2009/8/20
This one hour seminar will cover Precision Power Measurements and Power Factor Measurements.
Who Should Attend
- Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives, Power Conversion Devices, Power Supplies & Lighting Systems.
- Test Engineers Responsible for Testing Power Devices.
- Electric Transportation Systems Engineers.
- Power Quality Engineers Involved with Product Conformance Testing.
- Electric Motor Testing Webinar - 2009/7/16 The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- Technical Oscilloscope Probe Seminar - 2009/7/7 Today’s engineers are pressured to test high-speed signals in a reliable and timely fashion in a fast-moving environment of design verification and manufacture test. Probing is the front line of that testing; and, having the right knowledge in probing is indispensable for accurate and reliable test results. This seminar will provide you with that necessary knowledge and insight.
- Overcoming Noise in Data Acquisition: The Seven Deadly Sources, and How to Improve the Measurement Performance of Any System - 2009/6/16 Overcoming Noise in Data Acquisition: The Seven Deadly Sources, and How to Improve the Measurement Performance of Any System
- Digital Oscilloscope Power Analysis Seminar - 2009/6/11 As today's power supply designs evolve, so do testing requirements. During this webinar, you will be introduced to the many specialized power measurements necessary to evaluate switched-mode power supplies.
-
Power Analysis: Precision AC Power Measurements - 2009/5/14
Who Should Attend
- Design Engineers and Managers Involved with Power Measurement on Motors, Motor Drives, Power Conversion Devices, Power Supplies & Lighting Systems.
- Test Engineers Responsible for Testing Power Devices.
- Electric Transportation Systems Engineers.
- Power Quality Engineers Involved with Product Conformance Testing.
- Introduction and Use of an Optical Spectrum Analyzer - 2009/5/12 Sign up now for our free training on the many uses of an Optical Spectrum Analyzers. This one hour presentation covers the basics of light, the design, measurement, and test applications of an OSA. Initial subject matter will cover the nature of light and some key aspects of light propagation. In addition this seminar will also cover the design of a Monochrometer, an assortment of test conditions and configurations for measurement of various Device Under Test (DUT). Unique benefits of the Yokogawa line of Optical Spectrum Analyzers will be highlighted at the end of the presentation as well as a head to head performance comparison.
- 8位示波器不能满足要求时：使用针对机电仪器的高分辨率、隔离和混合信号仪器。 - 2009/5/7 我们都深知使用正确工具的重大意义。虽然传统8位示波器在很多情况下是我们的正确选择，但在进行混合信号、功率和/或机电测量时，它们通常并非最佳选择。市场上的一些仪器在设计时考虑了这些应用。混合仪器提供了传统8位示波器所不具备的功能。这些功能包括：高分辨率(高达16位)和隔离输入、用于长期记录的超长存储、支持各种信号输入(RMS耦合、温度、应变、频率-电压、加速计等 )。
- Electric Motor Testing Seminar - 2009/4/16 The one hour seminar will cover making precision electrical power measurements on AC motors and variable speed drives.
- 混合信号示波器和逻辑分析讲座 - 2009/4/14 如果您是一名使用微控制器、DSP或FPGA的嵌入式系统设计师或测试工程师，您肯定不会希望错过这个讲座。要在您的电路中使用嵌入式IC进行设计，您需要前所未有的大型测试工具库，对芯片上的A/D和D/A器件、串行和并行数字总线以及其它各种数字控制信号进行测量和故障排除。作为一名设计或测试工程师，您希望拥有功能尽可能全面的工具。
-
Fiber to the Home OTDR Testing - 2009/4/2
Fiber to the Home OTDR Testing
Yokogawa will discuss challenges of fiber installation and maintenance with regards to FTTH networks. Our years of international experience in deploying, testing and maintaining these networks has provided key insights to the challenges and solutions you will face. Join us as we cover OTDR testing in a FTTH environment. - Oscilloscope Basics & Key Features of Today's Scopes - 2009/3/19 Oscilloscopes are a tool of utmost importance for anyone wanting to look at the behavior of electrical signals in the time domain. This one hour seminar will provide a broad overview of oscilloscopes, focusing on key specifications and on some of the advanced waveform analysis capabilities of modern scopes.
2008
网上研讨会
- When 8-bit Scopes Aren't Enough: High-Resolution Isolated, Mixed-Signal Instruments for Electro-Mechanical Measurements Webinar - 2008/11/13 We all know what a difference the right tool can make. While traditional 8-bit oscilloscopes are the right choice in many situations, they often are not the best choice when making mixed signal, power and/or electro-mechanical measurements.
- Introduction & Use of an Optical Spectrum Analyzer Webinar - 2008/10/14 Sign up now for our free training on the many uses of an Optical Spectrum Analyzers. This one hour presentation covers the basics of light, the design, measurement, and test applications of an OSA.
- Power Measurement & Harmonic Analysis: Applications using latest Digital Power Analyzers - 2008/8/26 Power Measurement & Harmonic Analysis Seminar is the second part from the Yokogawa T&M University series on precision AC power measurements.
- UART, I2C/SPI/SM, CAN/LIN/Flexray: Tips & Tricks for Serial bus Protocol Analysis & Physical layer Troubleshooting using MSOs Webinar - 2008/7/24 Serial data buses have become increasingly common, core components of most electronic designs. As a design or test engineer, you presently need to use a protocol analyzer, logic analyzer, digital oscilloscope, or a combination of all three in order to debug serial bus signals. However, none of these instruments by themselves give you a complete picture of the physical and protocol layers—until now.
- UART, I2C/SPI/SM, CAN/LIN/Flexray: Tips & Tricks for Serial bus Protocol Analysis & Physical layer Troubleshooting using MSOs - 2008/4/17 Serial data buses have become increasingly common, core components of most electronic designs. As a design or test engineer, you presently need to use a protocol analyzer, logic analyzer, digital oscilloscope, or a combination of all three in order to debug serial bus signals. However, none of these instruments by themselves give you a complete picture of the physical and protocol layers—until now.