技术与服务热线:400 820 0372

WTViewerEfree Software

The WTViewerEfree is free software for power analyzer models that include WT series*. The software simplifies instrument configuration and gathering of measurements.

*WT5000/ WT3000E/ WT3000/ WT1800E/ WT1800/ WT500/ WT300E/ WT300

You can use the software to connect the WT series to a PC for access to the following:

  • Retrieve, display, and save data that the WT series has measured and set up measurement parameters.
  • Remote control of a WT series.

  • * Firmware Ver. 2.01 or later is required for the WT5000.
  • * Firmware Ver. 2.31 or later is required for WT1800.
  • * Firmware Ver. 1.21 or later is required for WT500.
  • * Firmware Ver. 6.11 or later is required for WT3000. And it requires to dedicated advance mode setting.

You can use this software to control a single PC-connected WT series.

Setting Window

As well as using the WT series front panel to set up the power analyzer, users can apply the software to quickly set up desired settings. It also shows all the settings and the status at a glance.

SettingWindow LG
 
SettingWindow LG

Measurement Window

The software can display items that cannot be shown on a screen of the WT series, such as multiple numeric measurement parameters, harmonics data of each other, bar graphs, trend graphs, vector, and voltage & current waveforms together.

MeasurementWindow LG

Menus

The software has the following menus:

  • Connection: Used to configure the communication between the WT series and PC.
  • Setting: Used to set WT series measurement conditions.
  • Measure: Used to display measured results in bar graphs, trend graphs, etc.
  • File: Used to save and load setup parameters.
  • Exit: Used to close the software.

Types of Display Screens

Numeric

Displays WT series measurement data numerically. For models with the Harmonic measurement option (/G5, /G6) or the Advanced Calculation option (/G6), harmonic measurement data is also displayed.

Numeric

Numeric List

Lists harmonic measurement data for each harmonic order. Numeric lists can be displayed when the WT series is equipped with the Harmonic measurement option (/G5, /G6) or the Advanced Calculation option (/G6).

Numeric list

Numeric Matrix

Displays WT series measurement data for each element.

Numeric Matrix

Waveform

Displays waveform display data that has been collected from the WT series.

Waveform

Trend

Displays changes in measured data over time on a trend graph.

Numeric Matrix

Bar Graph

Displays measured harmonic components for each harmonic order. Bar graphs can be displayed when the WT series is equipped with the Harmonic measurement option (/G5, /G6) or the Advanced Calculation option (/G6).

Bar graph

Vector

Display harmonic measurement parameters (fundamental components) as a vector plot. Vector plots can be displayed when the WT series includes the Harmonic measurement option (/G5, /G6) or the Advanced Calculation option (/G6) and more than 2 sets of the same input elements.

Vector

Functions

Measuring Mode Normal, harmonics, integration
Types of Files Waveform, calculated values, harmonics, settings
Display Screens Numerical, waveform, trend, harmonic bar graph* and vector plot*
* The Harmonic measurement option is required.
Data Acquisition Interval 50 ms at maximum speed.
- The data storage period can be any custom setting (more than 20 seconds) and the data update rate of the product.

- Depends on your PC's performance.* When the WT series data update interval is shorter than the time it takes for the software to collect one set of measured data, there will be pieces of data that the software will not collect.

Function List

Display Numeric Data
Waveform
Trend
Harmonic Bar graph
Vector
Types of Files Conversion to CSV
Data Acquisition Interval 50 ms at max. speed.

You can use this software to control a single PC-connected WT series. To control multiple PC-connected power analyzers from a single PC, please use the WTViewerE software application.

System Requirements

PC CPU Equivalent to Intel Core i5-2430M or better
Memory 2 GB or more recommended
Storage 10GB available free space or more
OS English version of Windows 8.1, or Windows 10
Communication Board GP-IB NI (National Instruments, but Windows 10 is not supported)
PCI-GPIB, PCI-GPIB+,
PCIe-GPIB, PCIe-GPIB+ or GPIB-USB-HS
On Windows 8.1: Use driver NI-488.2 Ver. 3.1.0 or later.
On Windows 10: Use driver NI-488.2 Ver. 15.5.0 or later.
GPIB-USB-HS+
On Windows 8.1: Use driver NI-488.2 Ver. 14.0 or later.
On Windows 10: Use driver NI-488.2 Ver. 15.5.0 or later.
RS-232 An available PC COM port
Ethernet An Ethernet port that supports 10BASE-T, 100BASE-TX, or 1000BASE-T
USB A USB port that supports USB Revision 1.1 or higher
Display, Printer, and Mouse Screen Resolution 1366×768 pixels or higher
Disk Drive A drive that can read CD-Rs
Operating System Must be compaible with the operating systems listed above.

Sep 29, 2022

  • Updated software version to 1.53; Fixed the vulnerability of file saving feature.

Oct 27, 2021

  • Updated software version to 1.52; Relaxed measurement stop conditions.

Jul 3, 2020

  • Updated software version to 1.51

寻找更多销售、技术和解决方案的信息?


联系我们

Precision Making

返回顶部
WeChat QR Code
微信扫一扫
获得更多专业服务