技术与服务热线:400 820 0372

功率分析仪 WT500

横河测试测量WT500 功率分析仪是一款可测量单相和三相功率的中端产品。半机架机身设计,紧凑结构,可进行双机架安装。标准配置包括彩色液晶显示屏、用于通讯和存储的USB接口等。基本精度为0.1%,最大输入为1000Vrms 40Arms,测量带宽为DC到100kHz。

新特性: WT500是由标准性能评估机构(SPEC)批准的设备,可用作功率分析仪效率基准。

功率分析仪wt500特点

 

-  同时测量电压、电流、功率分析和谐波分析
-  高速数据更新(100ms)
-  显示数值、波形和趋势
-  测量买/卖电能
-  设置简单、操作方便

 

电流量程: 0.5~40A

电压量程: 15~1000V

基本功率精度: 0.1%

频率量程: DC 0.5Hz~100kHz

 

按键布局提供直观控制

  1. 光标键
    使用光标键可在四个不同方向上移动屏幕上的光标。还可使用光标键和SET键在软菜单中进行选择。WT500的菜单结构比其它型号更便于用户使用。
  2. RANGE键
    使用RANGE键可设置电压和电流量程。使用上下键可以直观快捷地设置量程。
  3. DISPLAY键
    使用DISPLAY键可在数值显示、波形记录仪显示和其它显示之间进行切换。可轻松地改变显示格式。
  4. SETUP键
    使用SETUP键可输入功率分析仪测量所需的各种设置,比如接线方式和滤波器。
  5. FILE、IMAGE和STORE键
    这些与数据存储相关的按键都在同一个 区域中。可方便地将数据存入USB存储器中。
Tm Wt500 02
 

Swfbuttonsm 1

特点

  • 同时测量DC和AC信号
    DC/AC信号转换技术评价在再生能源市场中非常重要。使用2个或多个输入单元,WT500可同时测量DC和AC信号,并计算输入-输出效率。
  • 用于充电/放电和买电/卖电的单独积分功能
    WT500拥有积分功能,不仅能够评价二次电池等的充电放电电流,还能评价光伏发电系统中的卖电和买电。
  • 用USB存储器直接保存测量数据
    可将测量数据以CSV格式直接存入USB存储器中。
  • 使用光标键可轻松地进行设置
    菜单式屏幕实现直观设置。
  • 使用谐波测量/G5选件可同时测量常规数据和谐波数据
    可同时测量电压有效值、电流有效值、功率分析值和最高50次谐波分析成分。
  • WT系列产品用于节能设备的功率评估
    WT系列产品作为功率计,被用于绿色IT、能源之星、削减CO2排放及其他节能设备。包括WT500在内的所有WT系列产品可以满足您的功率评价需求。

全新设计的操作界面

Tm Wt500 03使用上下左右光标键实现直观地操作。

为减少设置错误,菜单内容按测量优先等级排列显示。

 

直接保存测量值功能

Tm Wt500 04安装了两个外设USB端口,可以在最短时间内将数据(最大1GB)保存到USB存储器中。可在Excel等应用程序中打开保存的数据。

* Excel是Microsoft Corporation在美国的注册商标。

 

多种显示格式

Tm Wt500 05除显示数值数据外,WT500还可以显示输入信号的波形和趋势(随时间变化的数值数据)。并且,安装谐波测量选件(/G5)的WT500还可以选择棒图显示和矢量显示。

*1 可显示高达约5kHz的波形。

*2 不含单相型号。

数值和波形显示不可进行分屏显示。

 

效率设置简单、显示方便

通过从列表中选择输入单元或输出单元,可设置2个效率公式。 示例:η1 = PΣ/P1 x 100%

η2 = PΣ/P2 x 100%

USB存储功能

Tm Wt500 06测量数据中必要的项目(如电压、电流和功率)以二进制或CSV格式(最大1GB)保存至USB存储器中。



使用Excel等常用应用程序可以打开以CSV格式保存的文件,从而以图表形式显示数据。

 

多种积分功能

Tm Wt500 07除有功功率(WP)、电流(q)、无功功率(WQ)和视在功率(WS)的积分功能外,还新增了买/卖瓦时测量功能。还可以计算一段积分区间内的平均有功功率。

此功能适用于间歇设备控制的变动功率评价。平均有功功率运算使用用户自定义设置。 

GP-IB通信(/C1)

 通过GP-IB通信,可用PC控制WT500或进行数据传输。

以太网通信(/C7)

Tm Wt500 17可通过以太网*通信传输数据。

支持使用FTP服务器传输文件。

* 100BASE-TX

 

外部电流传感器输入(/EX1、/EX2、/EX3)

可以直接使用电流钳(电压输出型)测量电流,无需断开电源电路的接线。通过设置外部电流传感器换算比,可以支持各种类型的电流钳式探头。

VGA输出(/V1) 

通过连接外部监视器,可以在大屏幕上显示数值和波形记录仪。此功能便于同时确认多个监视器上的数据或在较远距离检查数据。

谐波测量(/G5)

用此功能可同时测量常规数据和谐波分析数据。可测量最高50次谐波分析成分。使用WT500无需切换模式便可在测量总谐波失真率(THD)的同时确认电压和电流。

Tm Wt500 18   Tm Wt500 19
双谐波列表   THD测量

Delta运算(/DT)

使用此功能,可以通过三相3线(3V3A)制接线中测得的线电压和相电流来计算单独的相电压和相电流。通过三相3线(3V3A)制接线测得的线电压,可计算出相电压。当需要用三相3线(3V3A)制接线确定无中线被测设备(DUT)中的相电压时,此功能很有用。

提示:只有1个输入单元的机型不能安装此功能。

增加频率测量(/FQ) 

除标准2通道频率测量外,还可以选配所有通道频率测量,由此实现所有通道(安装了输入单元1~3)电压和电流的频率测量。此功能对于被测对象输入/输出电压和电流频率的同时测量,或者多个被测对象的电压和电流频率的同时测量非常有效。

提示:只有1个输入单元的机型不能安装此功能。

后面板

Tm Wt500 20

  1. 标准配置
  2. 电压输入端子
  3. 电流输入端子
  4. USB通信接口
  5. 外部触发信号、外部时钟输入接口






  6.  
  7.  
  8.  
  9. 可选配置
  10. 外部电流传感器输入端子(/EX选件)
  11. GP-IB通信接口(/C1选件)
  12. 以太网端口(/C7选件)
  13. VGA输出(/V1选件) 

特性

体现WT500高精度功率分析仪的基本特性示例

Tm Wt500 21
Tm Wt500 22
Tm Wt500 22
Tm Wt500 23

连接图

测试线和转接头的连接

Tm Wt500 28 1   
 

电流互感器的连接图

Tm Wt500 29 1


 
产品 型号  规格 数量
输出连接器 B8200JQ D-SUB 9针,带2个螺丝 1
负载电阻 B8200JR   10 Ω,0.25W x 4

4个并联成2.5Ω电阻。  
1

 

 

钳式探头的连接图

Tm Wt500 30 1 1





*不能同时连接或使用电流输入端子和外部传感器输入端子。

CN WT500 SelectionGuide

2016年9月9日

  • 发布固件版本1.21
名称 描述 文件类型  
Bulletin 7602-00C 0406 WT500中文简介第四版20140509 pdf icon
1.99 MB
下载
WT500_IM760201-01C 功率分析仪WT500的中文操作手册 pdf icon
20.51 MB
下载
LF功率计-A 功率测量仪器的英文单页 pdf icon
724 KB
下载
WT系列规格和功能比较 WT500及其它WT系列规格和功能比较 pdf icon
96 KB
下载
名称 描述  
WT500用于智能马桶能耗测试 智能马桶厂商希望对产品进行能耗控制。向客户推荐横河功率分析仪WT500完成该项测试。 了解更多
电力谐波治理评价测试 电力谐波从认识到治理、由低效到高效经过了三个阶段的发展。 了解更多
UPS(不间断电源)的功率质量评估和测试 UPS(不间断电源)的功率质量评估和测试 了解更多
变频器性能测试 测试项目:客户专门从事压缩机生产,需要配合空调厂家的变频器工作性能测试。其产品主要供国内主要的空调厂家。 了解更多
WT500功率分析仪应用-变压器性能测试 客户专门从事变压器、电抗器研发、生产,需要配合逆变器厂家对太阳能逆变器工作时的性能进行测试,其产品主要供国外厂家。 了解更多
功率分析仪WT500应用实测:测量光伏发电机的电力转换效率和功耗 近年来,在防止全球变暖的背景下,光伏发电备受关注。横河功率分析仪WT500, 为新能源发展提供有力的测试支持。 了解更多
电能质量分析仪WT500:测量风力发电机的电压、电流、功率和频率波动 为减少导致全球变暖的温室气体排放,风力是目前大力倡导的可再生能源(尤其在欧洲).横河电能质量分析仪WT500能够为新能源开发提供强有力的测试支持。 了解更多
电器的大电流测量 电器的大电流测量 了解更多
测量各种电机负载的功耗 测量各种电机负载的功耗 了解更多
AC适配器和其它产品在带或不带负载条件下的评估和效率测量 要评估AC适配器,工程师必须获取电压。 了解更多
您的软件有多节能? 想知道您的软件有多节能吗? Intel® Energy Checker和Yokogawa可以帮助您! Intel® Energy Checker SDK为软件开发人员提供了一个测量能效(节能性)的简单方法,来揭示使用Yokogawa精确、稳定的功率分析仪获得的必要、基本的测量结果。 了解更多
家用电器的性能评估和测试 近年来,在防止全球气候变暖的背景下,业界正在转向实施更严格的节能政策和使用可再生能源。 了解更多
电磁炉的大电流测量 近年来,厨房电器、热水器等实现“电气化生活”的家用电器逐渐普及。 了解更多
测量通过功率调节器买入和卖出的电力 能源耗竭问题是当今社会的热议话题,促使业界转向实施更严格的节能政策和使用可再生能源。 了解更多
名称 描述  
功耗测量软件 与WT3000、WT1600*1、WT500和WT210一同使用。符合IEC62301 Ed1.0(2005)和EuP Directive Lot6测试方法的要求。 *1 WT1600停产销售 y-Link
用于WT500/WT1600/WT3000的WT文件阅读器 此软件允许您在PC上显示WT500/WT1600/WT3000中保存的数据并将其更改为.csv格式。 y-Link
用于WT500的LabView驱动程序 用于WT500的LabView驱动程序 y-Link
TingMS测试管理解决方案 新的测试管理软件TingMS在原有基础上增加GP10/20及WT300系列功率计的驱动支持。 y-Link
USB驱动程序 当软件需要时需使用USB驱动程序。 y-Link
WT500示例程序 - Visual Basic 此为GP-IB、以太网和USB的Visual Basic示例程序,用于WT500 y-Link
WT500示例程序 - Visual Basic net 此为GP-IB、以太网和USB的Visual Basic net示例程序,用于WT500 y-Link
WT500示例程序 - Visual C# 此为GP-IB、以太网和USB的Visual C#程序,用于WT500 y-Link
WT500示例程序 - Visual C++ 此为GP-IB、以太网和USB的Visual Basic C++程序,用于WT500 y-Link
WTViewer 760122 - 更新 WTViewer通过以太网、GP-IB或串行通信(RS-232),从WT3000/WT1600/WT500数字功率分析仪获取数值、波形和谐波数据。 了解更多

外部传感器电缆 B9284LK

用于将WT3000的外部输入连接到电流传感器。
长度:50cm

转接头 751512

Safety-terminal-binding-post接头。用于电压不超过42V的电路。

AC/DC电流传感器 CT2000/CT1000/CT200/CT60

交流/直流电流传感器,可在直流范围内高精度测量。

测量线套件 758917

一套0.8m长的红色和黑色测量线,与一对758922或758929鳄鱼夹转接头选件一起使用。

压接端子接头 758921

用于将4mm香蕉插头插入压接端子的接头。套件包含一个黑色夹子和一个红色夹子。1000Vrms-CAT II。

钳式电流探头 96001/751552

用于测量大电流带电线路的专用AC输入钳式探头

小号鳄鱼夹转接头 758922

额定电压300V。连接到758917表笔。成对出售。

安全转换接头套件 758923

安全转换接头套件

转接头 758924

BNC和母香蕉插头之间的转换
适用于DL750/DL750P、SL1000&SL1400。

大号鳄鱼夹转接头 758929

额定电压1000V。连接到758917表笔。成对出售。

安全转换接头套件 758931

安全转换接头套件

概览:

智能马桶厂商希望对产品进行能耗控制。向客户推荐横河功率分析仪WT500完成该项测试。

概览:

近年来,在防止全球变暖的背景下,光伏发电备受关注。横河功率分析仪WT500, 为新能源发展提供有力的测试支持。

概览:

为减少导致全球变暖的温室气体排放,风力是目前大力倡导的可再生能源(尤其在欧洲).横河电能质量分析仪WT500能够为新能源开发提供强有力的测试支持。

概览:

要评估AC适配器,工程师必须获取电压。

概览:

电力谐波从认识到治理、由低效到高效经过了三个阶段的发展。

概览:

Energy consumption in low-power and standby modes is an important issue due to increased awareness that energy resources are becoming limited and demand for energy-saving household electrical appliances continues to grow. IEC62301 Ed2.0 (2011) and EN 50564:2011 define standby mode as the lowest energy consumption of an appliance not performing its main function, when connected to the mains. IEC62301 Ed2.0 (2011) defines test methods and requirements for both the mains supply and the test equipment. It is crucial that design and test engineers choose highly accurate power measurement tools to confirm that their devices meet these requirements.

概览:

想知道您的软件有多节能吗? Intel® Energy Checker和Yokogawa可以帮助您! Intel® Energy Checker SDK为软件开发人员提供了一个测量能效(节能性)的简单方法,来揭示使用Yokogawa精确、稳定的功率分析仪获得的必要、基本的测量结果。

概览:

近年来,在防止全球气候变暖的背景下,业界正在转向实施更严格的节能政策和使用可再生能源。

概览:

近年来,厨房电器、热水器等实现“电气化生活”的家用电器逐渐普及。

行业应用:
概览:

测试项目:客户专门从事压缩机生产,需要配合空调厂家的变频器工作性能测试。其产品主要供国内主要的空调厂家。

概览:

能源耗竭问题是当今社会的热议话题,促使业界转向实施更严格的节能政策和使用可再生能源。

概览:

客户专门从事变压器、电抗器研发、生产,需要配合逆变器厂家对太阳能逆变器工作时的性能进行测试,其产品主要供国外厂家。

概览:

电器的大电流测量

概览:

Check for differences in the specifications or features of the instruments. For values that do not match when inputting a 50/60 sine wave Check whether the value is within the specifications (error) of each power ...

概览:

The Precision Power Analyzer WT3000  D/A output terminal is electrically isolated from the case. For all other models, the D/A output terminal is connected to the case.

概览:

The difference in measurement values can be attributed to the difference in calculation methods for normal mode and harmonic mode.   The voltage, current, and power in normal mode are displayed as the total of the ...

概览:

The peak value and crest factor may be unstable if they have not been captured accurately. If the peak value is not stable, neither will the crest factor be stable. The cause is the difficulty in capturing the narrow ...

概览:

In the three-phase three-wire, or 3V3A wiring scheme, the phase angle of voltage and current input to each input differs from that of the actual load because it is the line to line voltage that is measured.  In ...

概览:
  • Power Analyzer/Power Meter 
  • In the case of three-wire, or 3V3A wiring, or three phase power source, they do not match because it is the line to line voltage that is measured
概览:

Check for differences in the specifications or features of the instruments. For values that do not match when inputting a 50/60 sine wave Check whether the value is within the specifications (error) of each power ...

概览:

The measurement intervals of the measured I/O data must overlap exactly. Check the sync source setting. For example, route the input to a three-phase device under measurement to input elements 1-3 on the power meter, ...

概览:

The value depends on the model of the power analyzer. For Precision Power Analyzer WT1000, WT2000, WT100, and WT200, it is fixed to the fundamental wave. For power analyzers with 7 segments LED, the relative harmonic content is fixed to the ...

概览:

The actual display update rate for the WT500 Power Analyzer will depend on the input signal and the trigger setting. In addition, there may be a very small trigger delay (several milliseconds) if the input signal does not match the ...

概览:

Check the Synch Source and Frequency Filter settings When a single-phase signal being measured fluctuates around power factor of 1.Slight fluctuations in the measured values of voltage, current, and power can cause a ...

概览:

The following may be causing the problem. 5V may have occurred during rating. Check the range setting again. DA output error can affect the values when the input is smaller than the rating. Have you checked the error ...

概览:
The input terminals on all Yokogawa power meteras are located on the rear panel. This takes into account safety when handling the measuring instrument.    The signal input to the power meter normally carries high ...
概览:

To use USB interface on the WT500 and WT1800 Power Analyzer from NI LabVIEW environment, you will need to use the USB driver from National Instruments. This USB driver is usually installed when you install NI-VISA and is called the ...

概览:

When the WT1600 Digital Power Analyzer is set into Integration mode, the averaged power (watt) values can be calculated and displayed. This is available only by using the User-Defined Function feature found in the MEASURE button menu.  The ...

概览:

 You can not use LabVIEW and WTviewer to communicate with the PC using same USB driver. The USB driver for LabVIEW and the USB driver for WTviewer is different. Yokogawa's YKMUSB driver is used by WTviewer ...

概览:
There are several items you will need to check and verify to solve this issue. Verify the GP-IB connectionSome instruments have a D/A output connector located next to the GP-IB connector. There have been some ...
概览:
  • Power Analyzer Accuracy and Basic Uncertainty Calculator from Yokogawa Test&Measurement 
  • Determine uncertainty in voltage, current, and active power (watts) measurement values
  • Various frequency ranges and wiring systems
概览:
  • Check the "Sync Source" and zero cross filter (frequency filter) settings.
  • For the WT3000, "Sync Source" setting is irrelevant if the data update rate is 250 ms, 500 ms, 1 s, or 2 s.
概览:

The waveform may actually not be a pure sine wave. Even though a 50/60 Hz sine wave is expected, the following factors may be involved: The waveform is slightly distorted (harmonic components are mixed in) Small ...

概览:
  • Power analyzers/power meters
  • Binding posts on the direct current input terminals
  • Prevent an open current circuit and safety hazards
概览:
  • WTViewer Save Setting feature will only save WTViewer setting information
  • Will NOT save the setting information of the instrument
概览:

The AC Power Input in all Yokogawa instruments is designed as a 3-pin connection (one of which is a GND pin). In some parts of the world, PCs are sold with AC power cables that are 2-pin. Often times this means the ...

概览:
  • WT1800 High Performance Power Analyzer, WT500 STORE functions can only be used to record NUMERIC data   
  • WT1600, WT3000 STORE functions can be used to record both NUMERIC and WAVEFORM data
概览:
  • Current Knobs and Pads (Studder) Used on the Direct Input Terminals of the WT500 Part Numbers
  • A9105ZG: Black Current Knob Set of 2 B9292GX: Pad (Studder) Set of 10
概览:

Although WTViewer is not officially supported under the Linux environment, users have successfully done so using WINE (flavor of Linux) via RS232. For connectivity to WT210/WT230, WTViewer requires that the meter be set ...

概览:

Yes, please contact your nearest Yokogawa representative for more details.

概览:

The following product tutorial guides have been created for the WT and PZ Series Power Meter and Analyzer instruments and are available for download. Each tutorial contains quick and easy steps to help you get started ...

概览:

This training module covers the following topics:

  • Introduction & Installation
  • Connecting to Instrument
  • Setup, Measure, and Analyze
  • File Operations: Saving and Loading Data
  • Video Demonstrations

寻找更多销售、技术和解决方案的信息?


联系我们

Precision Making

返回顶部
WeChat QR Code
微信扫一扫
获得更多专业服务