Modulare Testsysteme

Das modulare Testsystem AQ2200 ist die ideale Lösung für Messungen und die Evaluierung verschiedener optischer Komponenten und Übertragungseinrichtungen. Es stehen verschiedene Messmodule zur Verfügung: eine hochstabile Lichtquelle, eine breitbandig abstimmbare Lichtquelle, ein schneller optischer Sensor mit geringer PDL, ein hochauflösendes einstellbares optisches Dämpfungsglied, ein kleiner Bitfehlerratentester mit Impuls- Pattern-Generator (PPG) und Fehlerdetektor (ED), ein optischer Modulator mit variablem Extinktionsverhältnis, verschiedene Schaltmodule, ein optisches Rückflussdämpfungsmodul und ein optischer Empfänger mit zwei Wellenlängen. Diese Module lassen sich beliebig in einer Plattform kombinieren und ermöglichen ideale Messsysteme für verschiedene Anwendungen. Das multifunktionelle Testsystem AQ2200 mit zwei unterschiedlichen Frame-Controller-Plattformen verfügbar. Jedes Modell hat eine gewisse Anzahl von Modul-Steckplätzen, so dass die jeweils beste Plattformgröße für die jeweilige Messanwendungen ausgewählt werden kann.

Das multifunktionelle Testsystem AQ2200 ist in zwei unterschiedlichen Baugrößen verfügbar. Die Modelle unterscheiden sich durch die Anzahl der Modul-Steckplätze, so dass die optimale Plattformgröße für die jeweilige Messanwendungen ausgewählt werden kann.

Mit "Hot-Swapping"-Möglichkeit, sowie einfacher Fernüberwachung und Steuerung über Ethernet.

  • AQ2200-112 Light source module
  • High output level stability performance
  • AQ2200 Multi-Application Test System

Hochstabile Referenz-Laser-Lichtquellen für DWDM-Kanalmessungen. Die ein- und zweikanaligen Module sind Teil des modulbasierten Multiapplikations-Testsystem der Serie AQ2200, einer integrierten optischen Testlösung für optische Komponenten.

The AQ2200-212 is single channel sensor module with an analog output port.

Increase your testing power and capability with the AQ2200-222 sensor module.

Ideal für die Messung der Ausgangsleistung von Übertragungseinrichtungen und optischen Faserverstärkern. 

  • AQ2200-232 Optical Sensor Head (Large diameter detector, 800 to 1700 nm)
  • AQ2200-242 Optical Sensor Head (Large diameter detector, 400 to 1100 nm)
  • AQ2200-202 Interface Module (2-channels)
  • High performance optical sensor heads and interface module 

Superior switching reproducibility
Compact optical switches

Superior switching reproducibility
Compact optical switches

Das AQ2200-421 zeichnet sich durch höchste Reproduzierbarkeit der Schaltvorgänge und kompakte optische Schalter aus.

T&M Hausmagazin
1.2 MB
Overview:

Reportage
e-drive test park – HUCON AG
Shifting limits–Seite 4

Editorial
Warum ich immer wieder aufs Neue begeistert bin
Anna Krone–Seite 3

Neuheit
Neues 8-Kanal Oszilloskop
DLM5000–Seite 7

Neue Optische Sensormodule
AQ2200 Optische Testsysteme–Seite 9

Messtipp
Zugriff aus der Ferne
SmartDAC+–Seite 12

Overview:

No, although the basic shape is the same for both the AQ9335 and AQ9335C, the internal physical deisgn for the AQ9335C has been changed slightly to fit the AQ2200 series sensor modules for optimum accuracy. You will ...

Overview:

One possible way to create a non-blocking 4x4 switch on the AQ2200 Multi Application Test System is by using multiple 2x2 switch modules. Please refer to the attached file. ​

Overview:

The analog output of the AQ2200-211 Sensor Module converts digital data to analog data in 100 us interval. It is not a direct output of an analog amplified but it is a D/A output. ​

Overview:

The following are the specifications for the AQ2200-111 1490nm DFB Module:- Center wavelength: 1490nm+/-10nm- Wavelength accuracy: 0.05nm- SMSR: 30dB or morePlease refer to the datasheet for the AQ2200-111(1310) ...

Overview:

Please download and refer to the attached document for complete instructions on how to upgrade the firmware for the AQ2201/AQ2202 Frame Controller.

Overview:

The meaning of "Monitor port: -13 dB" is that -13 dB corresponds to about 5% (10Log(0.05) nearly equals to -13). That is, output power is divided by an optical coupler at a ratio of 95:5, and 5% is for monitor ...

Overview:

Yes, the AQ2200-141/-142 FP-LD modules have a built-in isolator. The isolation is 35dB.

Overview:

The Chopped Light mode is used: To increase measurement level sensitivity by cutting the high frequency noise To detect only the light that the LS emitted, effective for free space measurement. In free space ...

Overview:

If you have products currently in China that require calibration or repair, you may either return them to your local Yokogawa service center or the Yokogawa China Service & Repair Center.   Please be advised that ...

Overview:

No, unfortunately due to the number of current fiber combinations, we do not stock optical fibers. There are many companies that specialize in optical fiber cords.

Product Overviews

    Overview:

    From visible light to telecommunication bands and even up to applications in the 2000nm region, optical testing professionals count on the Yokogawa Test&Measurement optical testing family of products. For decades, these precision-based optical measuring instruments have met and exceeded the needs of many customers’ experimental requirements. Applicable to a range of uses in R&D, manufacturing, and academia, Yokogawa Test&Measurement OSAs, OTDRs, OWMs, modular manufacturing test systems, and more deliver quality, consistency, ease of use, and market leadership for all manner of optical test applications.

Suchen Sie mehr Informationen über unsere Mitarbeiter, Technologie oder Lösungen?


Ihr Kontakt zu uns

Precision Making

Oben