AQ7270 OPTICAL TIME DOMAIN REFLECTOMETER (SUPPRIMÉ)
Notice: This product was discontinued on 19/11/2009.
AQ7275 Optical Time Domain Reflectometer is a replacement product.
The AQ7270 OTDR maximizes the total working time during on-site tests as the time to power up the device, make measurements, and analyze and store the measurement results are significantly reduced. The measurement results can easily be transmitted to computers using the USB interface or the Ethernet. The analysis software (optional), helps with preparation of computer-generated reports.
Voir plus d'images:
page links
Détails
section links
Features
The AQ7270 OTDR condenses the total working time during on-site tests as the time to power up the device, the time taken to make measurements, and the time to analyze and store the measurement results are reduced significantly. The measurement results can easily be transmitted to computers using the USB interface or the Ethernet and the analysis software (optional) helps with preparation of reports on a computer.
- World's Shortest Dead Zone*: <0.8m (2.7 ft) Enables multiple close range event detection
- Tests Up to Four Wavelengths 850/1300/1310/1490/1550/1625/1650nm and more
- Multiple Functions Optical Monitor, Light Source, Built-in printer, Built-in Dummy Fiber and more
- Large and Bright 8.4” LCD on a lightweight, compact, and solid body
- Less than 10 sec. Power-up Time Enables users to start testing in just seconds
- One Button Testing Executes programmed procedure to improve productivity drastically
- A powerful tool for analyzing, reporting, and printing OTDR test data AQ7932 OTDR Emulation Software
Superior cost performance, easy to operate.
Makes your work more efficient.
Meets fiber testing needs from FTTH to Metro networks!
From 1- to 4-wavelength models
The AQ7270 comes in eleven models combining different measurement wavelengths and dynamic ranges. Supported wavelengths: 1310, 1490, 1550, 1625, 1650 nm (single mode), 850, and 1300 nm (multi mode).
World's Shortest Dead Zone*: <0.8m (2.7 ft)
.The AQ7270's event dead zone is the shortest in the world, enabling detection of closely spaced events.
*: Based on company research of the field use OTDR, as of November 2006
High Dynamic Range up to 40dB
The high dynamic range of the AQ7270 enables accurate measurement of optical fibers in short periods of time. This makes it a powerful tool for evaluation of metro networks with relay distances in excess of 100 km, or FTTH (PON) and other short optical fiber networks with large insertion loss originating from optical couplers.
Less than 10 sec. Power-up Time
It's ready when you're ready!
Now measurements can be started quickly upon arrival at the site. 10 seconds to power-up from completely OFF to fully ON! With such a fast power-up time, battery life can be extended by turning the power off while not in use at the job site without any concern about the power-up time when the next job is ready. It's ready when you're ready!The worldwide spread of broadband services has stimulated the installation of optical fiber in metro and access networks, which in turn has increased the demand for portable and reliable test equipment to aid the installation and maintenance of these networks.
Our new OTDR has been developed to address these challenges with particular aims of improving operability to boost work efficiency and cost-effectiveness.
The AQ7270 carries forward the basic operation of its predecessors (the AQ7250 and AQ7260 OTDR), while adding a Detail mode for trained technicians with functions for setting of measurement conditions and performing manual measurements.
Automatic Setting of Measurement Conditions -Full Auto Mode-
Simply choose the measured wavelength, then press a button.
Measurement with Auto Wavelength Switching -Multi Wavelength Mode
Prepare multiple wavelengths to measure, then press a button.
Macro's Measurement with Predefined Procedures –One Button Mode
Simply choose previously set measurement procedures, then press a button.
Easy Operation with the Assistance Function!
Assistance Setting Up Measurements –Measurement Wizard
| Displays detailed explanations of parameters in the measurement conditions setting menu, and gives guidelines for setting methods. This function assists unskilled users.
|
 Measurement Wizard Menu
|
Active Line Alarm
| Never disturb communication lines There may be concern that technicians inputting the OTDR measurement signal into the communication line could cause communication errors. The live line alarm monitors the fiber’s optical power level and diplays an alarm message if it detects optical power at or higher than a specified threshold level, in order to warn the technician not to mistakenly feed the signal into the communication line. |
Active Line Alarm Message |
Plug Check Function
|
Never spoil measurements with poor connections or dirty plugs The plug check function monitors the condition of the OTDR's optical input/output connectors and displays an alarm if the connection is not properly made. This function is useful for checking for damage, dirt, or other problems with optical plugs at the OTDR or on the fiber under test, and for helping technicians to remember to connect the fiber under test. |
Plug Check Alarm Message |
Fault Event Display Function
| Detecting Abnormal Events
The fault event display function detects abnormal connection or reflection points and displays them. Of the events detected by the event detection function, abnormal events that cross a specified threshold value are highlighted in the event table and waveform display. |
Trace Fix Function
|
Measurement with Comparison to a Reference Trace You can freeze the display of one trace and overlap it with real time or averaged waveforms for comparison.This is useful to create a template when installing multicore fiber, or for checking aged deterioration during maintenance on existing fiber networks. In addition to the last-measured waveform, a waveform can be loaded from a file to be used as the reference waveform. |
Trace Fix Function |
Setup Key
| Jump to Measurement Condition Settings With the new SETUP button on the front panel, it is easy to move to the measurement condition setting menu. |
|
Functions
Trace Analysis Functions
| Multi Trace Analysis For Evaluation of Multicore Fiber Up to four traces can be overlaid on the display for analysis and comparison. This is useful for evaluating connection point locations and loss after installing multicore fiber. |
 |
2 Way Trace Analysis
| For Accurate Splice Loss Measurement by Bi-directional Testing Merges the two traces measured from both directions and finds the correct splice loss. Connection point loss in lines where optical fibers of differing backscatter coefficients are connected can differ depending on the direction. In such cases, you can accurately determine the loss by measuring in both directions and taking an average. |
 |
Differential Trace Analysis
| For Evaluation of Aged Deterioration Displays the difference between two specified traces. Makes it simple to check aged deterioration of fibers or connection points, or fluctuation in loss between fibers, and other phenomena. |
 |
Section Analysis
|
For Evaluation of Total Return Loss Finds the total return loss in specific portions of the fiber. This type of evaluation is often requested because the multiple reflections from optical fiber networks can affect signal light from transmitters (cable TV etc.). |
 |
Smart File Function
Language Selection
In addition to English (standard), you can select a display language of French, German, Chinese, Korean, Russian, and others.USB Function
USB connectivity makes it more convenient to output to external memory or printers, and to set up communication. The AQ7270 comes standard with two USB1.1 compliant connector ports (Type A and Type B).
Saving Files to USB Memory-Type A |
Using USB memory or a USB hard disk, you can save large amounts of data. Also, you can easily transfer saved data to a PC or other device. |
| Printing on an External Printer - Type A  |
You can print screen images or measured data on USB printers. |
| Remotely Controlling the AQ7270 from a PC - Type B
|
The AQ7270 can be remotely controlled from an external PC by connecting a USB cable from one to the other. |
| Accessing the AQ7270 Internal Memory from PC - Type B  |
You can easily access to internal memory with USB cable from a PC. |
Outside View
Front Panel
Top Panel (Shown with optional Printer/Lan installed)
Side Panel
Options
Built-in Dummy FIber (/DM Option)
Excellent for detecting faults in fiber patch panels!
Fibers in offices frequently involve short distances between connectors. By using the dummy fiber, you can check whether there is any abnormal near-end connection loss. Also, by measuring the connection loss at the near-end connector, you can determine the total fiber loss including that of the connector.
Optical Power Monitor (/PM Option)
| Using the power monitor (factory option), you can check optical power for link loss testing or when troubleshooting. Useful for checking the optical power at the ONU's receiver in FTTH. When combined with a stabilized light source, it can also be used as an optical fiber identifier. |
|
Light Source (/LS Option)
| The light source (factory option) can be used for optical fiber identification or optica loss testing. |
|
Built-in Printer, LAN (/PL Option)
|
An optional built-in thermal printer is provided to instantly print out a screenshot of the AQ7270's display, measurement conditions, analysis results, and a event list. LAN function allows easily accessing to internal memory with Ethernet cable from a PC. |
 |
Spécifications
| Nom | Description | Type de Fichier | |
|---|---|---|---|
| Bulletin AQ7270-01E | Optical Time Domain Reflectometer AQ7270 |  1.56 MB |
Télécharger |
Logiciel
| Nom | Description | |
|---|---|---|
| AQ7270 Series OTDR Remote Controller | The AQ7270 Series OTDR Remote Controller allows users to control the AQ7270 Series OTDR from a PC connected via an Ethernet or a USB interface. You can control the AQ7270 Series OTDR from a control panel that is displayed on the PC when the AQ7270 Series OTDR Remote Controller software starts up. | y-Link |
| AQ7932 OTDR Emulation Software (Learn More) | The AQ7932 OTDR Emulation Software is a powerful tool for analyzing, reporting, and printing OTDR test data, With the AQ7932 software, you can perform analysis on your PC. | En savoir plus |
| TMCTL | TMCTL is a DLL to support development of custom software. By using this DLL, users can write original programs to control instruments from a PC. | y-Link |
| USB Driver | The USB Driver is needed when required by the software. | y-Link |
