DL350 Portable ScopeCorder
The DL350 Portable ScopeCorder combines all the measurement and recording capabilities you need when you are away from your office or lab - all in one compact instrument.
Featuring a resistive touch screen, the DL350 provides the flexibility you need when you need it. Whether you are recording high-speed transients or long-term signals, using “quick and simple” setup or advanced features, the DL350 makes complete measurements completely portable.
Transient recording and complete data measurement in one compact solution
As the portable instrument in Yokogawa’s ScopeCorder family, the DL350 offers:
Portability
- A4-sized compact chassis
- Battery power for 3.5 hours
- Resistive touch screen
- Memory recorder mode for easy data logging setup
Mobility
- GPS recording: longitude, latitude, velocity, and more
- Designed for vehicle testing
- Records to SD cards
Modularity
- Compatible with 19 different input modules
- Up to 8 channels analog inputs
- Up to 100 MS/s sampling rate
- Up to 16-bit analog resolution
Flexible and swappable input modules with built-in signal conditioning
Choose from 20 types of input modules and install up to 2 in the DL350 Portable ScopeCorder at a time to capture up to 32 channels plus 16 built-in channels of digital input. Input types include:
- Voltage & Currents
- Sensor Outputs
- Temperature, Vibration/Acceleration, Strain, Frequency
- Logic Signals & CAN / CAN FD / LIN and SENT
Use it like a data acquisition system or a long memory oscilloscope
Up to 20 Gpoints* of data per module can be recorded directly to an SD card. This means that the DL350 can be used for continuous recording for up to 50 days. For high speed signals, up to 100 M points per module of internal memory is available to capture fast transients. This is up to 10,000 times more than other portable oscilloscopes or test tools and thus signals can be captured with higher sample rates or for much longer periods.
* The firmware version 1.20 or later is required.
Verify power line quality using harmonic, power or FFT analysis
The power in single- and 3-phase systems can be evaluated. Additionally for fundamental waveforms of 50 or 60 Hz, up to 40 harmonic orders can be analyzed. Alternatively use the suite of FFT functions to perform full frequency analysis.
Harmonics analysis (bar graph)
FFT analysis
Environmental features for portability
Vibration resistant
Instruments used for in-vehicle driving tests or field maintenance must be able to make reliable measurements. The DL350 has an aluminum inner frame and an external rubber bumper and conforms to the Japanese JIS D1601 standard for resisting in-vehicle shock and vibration.
Wide Temperature Range
Even when used with the rechargeable battery, the DL350 will operate in temperatures from 0 to 45 degrees. The DL350 brings high-quality laboratory measurements into the harsh environments of the field.
A wealth of triggers for fault finding
The user has a choice of a simple level trigger or can use enhanced triggers such as pulse width, waveform period and triggers across multiple channels. For example, the wave window trigger is ideal for AC power line monitoring which enables voltage sags, surges, spikes, phase shifts or drop outs to be easily captured (available for 40 to 1,000 Hz waveforms).
Leave a DL350 unattended and automatically save the waveform to a file or send a notification email if and when it triggers.
Vehicle Edition
The ScopeCorder Vehicle Edition is designed for engineers working in the automotive and railway industry, providing a thorough insight into the dynamic behavior of the electromechanical system. This integrated approach results in considerable time saving compared to using multiple separate instruments.
Download the eBook to learn more.
In-vehicle Testing
CAN/CAN FD bus, LIN bus and SENT monitoring
Use the DL350 with /VE option and bus monitor module to decode CAN/CAN FD bus, LIN bus or SENT signals and display information such as engine temperature, vehicle speed and brake pedal position as trend waveforms and compare this with the analog data coming from the actual sensors. This enables automotive engineers to gain an insight into the dynamic behavior of the complete electromechanical system.
Memory recorder mode simplifies data recording for maintenance and monitoring tasks.
The DL350 offers a choice of operating modes, including recorder mode, which makes it easier than ever to set up long-term data recordings. Choose Easy Setup, and the setup wizard quickly guides the operator through the entire setup process. Just select the desired channels, recording duration, and sampling interval, and press Start!
Choosing Easy Setup opens a guided, three-step process to begin recording for up to 50 days.
Use the touchscreen during recording to scroll across the entire data set.
Long-Term Temperature Monitoring
Using the DL350 Memory Recorder Mode Easy Setup, combined with a 16-channel thermocouple input, it's easy to record hours, days, or weeks of data with a few simple settings.
Examples of Complex Measurements
| Field | Application Purpose | Measurement Item | User Advantages | ||
|---|---|---|---|---|---|
| Slot 1 | Slot 2 | ||||
| EV (electric vehicle) |  |
Evaluation of battery voltage fluctuation while driving |
Battery voltage | CAN/CAN FD communication data | Small size, battery drive, synchronization with GPS* position and time data |
| Power tool |  |
Evaluation of practical behavior |
Battery voltage, motor rotation pulse | Tool vibration | Small size, battery drive, complex measurement of voltage and vibration |
| Field device |  |
Maintenance of ultrasonic-type vortex flow meter |
Sensor receiving wave, receiving pulse |
Gate signal | Small size, 2-way power source, long-term monitoring with long memory |
| Factory/plant |  |
Power quality monitoring |
AC power, voltage, current |
Auxiliary power source monitor |
Small, portable, window trigger (instantaneous power failure, sag detection) |
| Steel making Paper making |
 |
Rolling process monitoring |
Thickness gauge monitor |
Temperature | High noise immunity, external clock (roller) synchronization |
Logging GPS and Analog Data
Combining position, altitude, and motion data with precise timing, location-based data acquisition is easy with the DL350.
Combining Motion and Analog Measurements
Capture data from motion accelerometers synchronized with other analog data. The DL350 series ScopeCorder features input modules and functions to make this possible.
Power Line Monitoring in Plants and Factories
By using a wave-window trigger, voltage sags, surges, spikes and dropouts can be detected and captured.
Multi-phase voltages up to 1 kVrms and 1.4 kV peak can be recorded using 720268 high-voltage isolation modules.
In the case of unattended operation, waveforms can be saved, or an e-mail sent, when the DL350 is triggered.
Industrial robot maintenance
It is possible to monitor and record the control signals to the servomotors and their speed and torque at the same time.
For condition monitoring, FFT analysis can be used on the vibration signals from accelerometers to help identify potential failures in machines or components.
Remote operation is available using the ‘assistant software’ or the input/output terminals making it potentially safer to use.
Additional Option License for DL350
This is a software license allowing users to add “vehicle edition”, a software option for the DL350 ScopeCorder, by themselves after purchasing the main unit.
PC data and setup file management
DL350 Assistant software
Data files or setup configuration files stored in the DL350 SD card can be backed up with the press of a button. Remote setting, start-stop control and setup file editing can also be easily done on the connected PC.
Remote waveform monitoring and instrument control
XWirepuller
Remote control and waveform display monitoring of a DL350 via USB or Ethernet.
Display and analysis of recorded waveforms
Xviewer LITE
Load waveforms captured by the DL350 and display, zoom, and export the data to the popular CSV format.
Xviewer
The full version of XViewer also enables parameter measurement, statistical analysis, FFT, and filtering.
Download 30-day trial software.
LabVIEW Driver for DL350
National Instruments LabVIEW Driver for DL350 is available.
WDF File Access Library
WDF File Access Library is the API to access waveform data files saved in WDF format.
* VisualStudio 2008 SP1 is required to use this software.
MATLAB WDF Access Toolbox
MATLAB WDF Access Toolbox enables the access to waveform data files saved in WDF format on MATLAB.
To control the instruments on MATLAB, please use Instrument Control Toolbox provided by MathWorks.
DIAdem Data Plugin
Use the data plugin to load DL350 measurement data and GPS data (latitude, longitude, altitude, speed and motion direction) into NI DIAdem.
 |
Compared to the reference product DL850E, CO2 emission was reduced by about 70%. Results of Life Cycle Assessment |
How can I capture data from motion sensors synchronized with other analog data? The Yokogawa ScopeCorder series of instruments feature input modules and functions to make this possible.
Testing actuation of a side impact airbag to measure the optimal timing.
This comprehensive training module covers the following topics:
- Introduction & Product Familiarization
- Basic Features
- Advanced Features
- Step-by-Step Video Demonstrations of Features
This training module covers the following topics:
- Introduction & Installation
- Basics of Xviewer
- Advanced features
- Video Demonstrations
Brochures
- DL350 ScopeCorder (4.4 MB)
- Plug-in modules specifications ScopeCorder series DL950/DL850E/DL850EV/DL350/SL1000 (4.0 MB)
- Probes and accessories for Oscilloscopes (2.3 MB)
Instruction Manuals
- DL350 ScopeCorder Features Guide (5.7 MB)
- DL350 ScopeCorder User's Manual (6.8 MB)
- DL350 ScopeCorder Getting Started Guide (9.0 MB)
- DL350 ScopeCorder Communication Interface User's Manual (2.9 MB)
- Model 709830 Additional Option License for the DL350 User's Manual (171 KB)
- Precaution Concerning the Modules (178 KB)
Specifications
Software
- IS8000 Integrated Software Platform
- Xviewer 701992 / XviewerLITE
- Xwirepuller
- DL350 Assistant Software
- WDF File Access Library
- MATLAB WDF Access Toolbox
- Symbol Editor
- Binary Data File Converter
- DL-Term
- GO-NOGO Zone Editor
- TMCTL
- Yokogawa WDF DataPlugin ( NATIONAL INSTRUMENTS Web Page )
- USB Drivers
- LabVIEW drivers for DL350 ( NATIONAL INSTRUMENTS Web Page )
Firmware
Drawings
- DL350 ScopeCorder (437 KB)
Product Overviews
- Yokogawa DL350 Scopecorder
- Video: Features and Applications
- Related Industries, Products, and Solutions
Watch a step-by-step walkthrough of recording GPS position and motion data on the DL350.
How-tos
- Using the portable DL350 ScopeCorder Memory Recorder Mode Easy Setup
- Combined with 16-channel thermocouple input
- Record hours, days, or weeks of data
- Decoding features of the DL850EV ScopeCorder
- Decoding and plotting SENT data, fast and slow channels, exactly equivalent to analog input channels.
A demonstration reading a 4 - 20 mA transducer into an analog channel on the Portable DL350 ScopeCorder.
In this video we demonstrate the GPS data logging capability of the DL350 Portable ScopeCorder. Recording Position, Velocity, and Altitude simultaneously with accelerometers or other analog inputs is simple with the DL350's built-in features.
