WT500 MID-RANGE POWER ANALYZER
The WT500 Power Analyzer excels at single-phase and three-phase power measurements. Standard features include a color TFT display and USB interface for communications and memory. The instrument has a basic accuracy of 0.1%, maximum inputs of 1000 V, 40 A and a measurement bandwidth of DC to 100 kHz.
|-||Simultaneous measurement of voltage, current, power, and harmonics|
|-||High-speed data updating (100 ms)|
|-||Display of numerical values, waveforms and trends|
|-||Measurement of bought and sold watt hours|
|-||Easy setup and operation|
Voltage range: 15 to 1000 V
Basic Power Accuracy: 0.1%
frequency range: DC 0.5 Hz to 100 kHz
Key layout offers intuitive control
- Simultaneous measurement of DC and AC signals
Evaluation of DC/AC signal conversion technology is critical in the renewable energy market. With input from 2 or more elements, the WT500 can measure DC and AC signals simultaneously and calculate input-to-output efficiency.
- Separate integration functions for charge/discharge and bought/sold power
The WT500 is equipped with integration functions that can not only evaluate charge and discharge current such as from secondary cells, but also bought and sold power in photovoltaic power generation systems.
- Saving measured data directly to USB memory
Measured data can be saved in CSV format directly to USB memory.
- Easy setup with cursor keys
Menu-type screen offers intuitive setting.
- Simultaneous measurement of normal data and harmonic data with the harmonic measurement, /G5 option
RMS voltage, RMS current, power values, and harmonic components up to the 50 order can be measured simultaneously.
- WT series for power evaluation of energy-saving equipment
The WT series have been used as powermeters for Green IT, Energy Star, CO2 reduction and other energy-saving equipment. The WT series-Including the WT500--supports your power evaluation needs.
Newly Designed Architecture
Intuitive control by using cursor keys in four different directions.
To reduce setting errors, menus display settings in order of relative importance in order.
Measured Value Direct Save Function
Two USB ports for peripherals are installed for direct data saving (up to 1 G byte) in USB memory at shortest intervals. The saved data can be opened in applications such as Excel.
* Excel is a registered trademark of Microsoft Corporation in the U.S.A.
A Variety of Display Formats
In addition to numerical data, the WT500 can display input signal waveforms and trends (time variation of numerical data). Bar graph display and vector display are also available with the harmonic measurement (/G5) option.
*1 Waveforms of up to approximately 5 kHz can be displayed.
*2 Excludes single-phase models.
Split screen display for numerical values and waveforms is not available.
Simple Setting and Display of Efficiency
|Two efficiency calculations can be set by selecting input elements or output elements from a list.||Example: η1 = PΣ/P1 x 100%
η2 = PΣ/P2 x 100%
USB Memory Storage Function
Only necessary items within the measured data like voltage, current, and power can be saved in USB memory in binary or CSV format (up to 1 GB).
Files saved in CSV format can be opened in general-purpose applications such as Excel to allow displaying of data in graphs.
Variety of Integration Functions
In addition to integration functions of active power (WP), current (q), reactive power (WQ), and apparent power (WS), a new feature provides measurement of bought and sold watt hours. Also, average active power can be calculated over an integration interval.
This feature is useful for evaluating the power consumed by intermittent-control instruments in which the power value fluctuates. Average active power is calculated by using user-defined settings.
GP-IB Communication (/C1)
GP-IB communication enables you to control the WT500 or transfer data from a PC.
Ethernet Communication (/C7)
Data can be transferred via Ethernet* communication.
It enables file transfers using an FTP server.
External Current Sensor Input (/EX1, /EX2, /EX3)
Current can be measured by using current clamps without disconnecting power supply wiring (voltage output type). By setting an external current sensor conversion ratio, it can support various types of current clamp-on probes.
VGA Output (/V1)
By connecting to a monitor, you can create large displays of numerical values and waveforms. This function is convenient for simultaneously confirming data on multiple monitors, or to check data remotely.
Harmonic Measurement (/G5)
This function enables simultaneous measurement of normal and harmonic data. Harmonic components of up to the 50th order can be measured. With the WT500 you can simultaneously confirm voltage, current, and the distortion factor (THD) as well as measure the distortion factor without switching modes.
|Harmonic Dual List||THD measurement|
Delta Computation (/DT)
This function allows you to calculate individual phase voltages and phase currents from the line voltages and phase currents measured in a three-phase, three-wire (3P3W) system. The phase voltage can be calculated from the line voltage measured with the three-phase, three-wire (3V3A) method. This is useful when you want to determine the phase voltage in a DUT with no neutral line by using the three-phase, three-wire (3V3A) method.
Note: This function cannot be installed on products with only one element.
Added Frequency Measurement (/FQ)
In addition to the standard two channels of frequency measurement, an option is available for frequency measurement on all channels. This option provides frequency measurement of voltage and current on all channels with input elements 1 through 3 installed.This is necessary when you want to measure voltage and current frequency from the instrument's I/O as well as voltage and current frequencies of multiple items under test at the same time.
Note: This function cannot be installed on products with only one input element.
- Standard feature
- Voltage input terminals
- Current input terminals
- USB communication interface
- External trigger Signal, External clock input Connector
- External Current Sensor Input Terminals (/EX option)
- GP-IB communication Interface (/C1 option)
- Ethernet Port (/C7 option)
- VGA Output (/V1 option)
Example of basic characteristics showing the WT500's high precision
Connection for the Measurement Cables and Adapters
|Product||Part no.||Specifications||Order quantity|
|Output connector||B8200JQ||D-SUB 9-pin, with 2 screws||1|
|Load resistors||B8200JR|| 10 Ω, 0.25 W x 4
Connect 4 in parallel to set resistance to 2.5 Ω.
Connection Diagram for Clamp-on Probe
*Don't connect and use the current input terminal and EXT terminal simultaneously.
UpdatesSeptember 9, 2016
- Released firmware Version 1.21
Update for WTViewerEfree
|Bulletin 7602-00E||WT500 Power Analyzer||External Link||다운로드|
|How to Measure Electrical Power||If a product uses power, then power consumption and power quality measurements must be made as part of product design and test. These measurements are essential to optimize product design, comply with standards and provide nameplate information to customers.
This article will discuss best practices for making these measurements, starting with power measurement basics and proceeding to the types of instruments and associated components typically used to make measurements. The article will conclude with real-world examples, which apply the information imparted earlier in the article to solve practical measurement problems. Although most of us have been exposed to basic power measurement equations, a primer is helpful to summarize this information and to show how it applies to product design and test.
|How Green is your Software?||Want to know how green is your Software? Intel® Energy Checker and Yokogawa can help you! The Intel® Energy Checker SDK provides software developers a simple way to measure the energy efficiency (greenness) of their Software by exposing the necessary and basic measurements made by Yokogawa’s highly accurate and reliable Power Analyzers.
|Measuring Power Bought and Sold via Power Conditioners||These days people are talking about the problem of energy depletion, and the industry is turning more and more toward stricter energy savings policies and the use of renewable energy.||자세한 내용|
|Evaluation and Efficiency Measurements of AC Adaptors and Other Products with and without Loads||To evaluate AC adaptors, engineers must acquire the voltage.||자세한 내용|
|Performance Evaluation and Testing of Home Electronics||Prevention of global warming has become an issue in recent years, and industry is turning more and more toward stricter energy savings policies and the use of renewable energy.||자세한 내용|
|Measuring Power Conversion Efficiency and Power Consumption in a Photovoltaic Generator||Photovoltaic power generation has gained attention in recent years, largely due to a new sense of urgency regarding the prevention of global warming.||자세한 내용|
|Measuring Fluctuations in Voltage, Current, Power, and Frequency of a Wind Power Generator||Wind power is a renewable energy source that is being aggressively promoted (particularly in Europe) in order to reduce emissions of the greenhouse gasses that are responsible for global warming||자세한 내용|
|Large Current Measurements for IH Cooking Heaters||In recent years the buzzword "all electric" is becoming popular, which refers to kitchen appliances, water heaters, and other devices in the home all being supplied with electric power.||자세한 내용|
|Free software WTViewerEfree for WT3000E/WT3000*¹/WT1800E/WT1800/WT500||It can control WT3000E/WT3000*¹/WT1800E/WT1800 and save the measurement data into a PC. And it shows measurement result on the monitor of the PC by numeric table, harmonic list, trend graph, bar chart, vector and waveform.
*¹WT3000 needs to upgrade the firmware to Ver. 6.11, and it requires to set a dedicated advance mode.
|LabVIEW Drivers for WT500||LabVIEW drivers for WT500||y-Link|
|Power Consumption Measuring Software||For use with WT3000/WT3000E, WT1800/WT1800E,WT1600*¹, WT500, WT210*¹, WT310 and WT310E. Conforms to IEC62301 Ed2.0(2011) and EN 50564:2011 testing methods.
*¹ The WT1600 and WT210 discontinued sales
|TMCTL||TMCTL is a DLL to support development of custom software. By using this DLL, users can write original programs to control instruments from a PC.||y-Link|
|USB Driver||The USB Driver is needed when required by the software.||y-Link|
|WT File Reader for WT500/WT1600/WT1800/WT1800E/WT3000/WT3000E||This software allows you to display data saved in WT500/WT1600/WT1800/WT1800E/WT3000/WT3000E on your PC and change it to .csv format.||y-Link|
|WT500 Sample Program||These are sample program of Visual Basic, Basic net and C# for Communication interface GP-IB, Ethernet and USB for WT500.||y-Link|
|WTViewer 760122 - Update||WTViewer acquires numeric, waveform, and harmonic data from the WT3000/WT3000E/WT1800/WT1800E/WT500 Digital Power Analyzer via Ethernet, GP-IB or serial communications (RS-232).||자세한 내용|
Safety-terminal-binding-post adapter. Use for circuits having voltage levels no greater than 42 V.
AC/DC current sensors capable of highly accurate measurement starting in DC range.
A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.
Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip. 1000 Vrms-CAT II.
Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.
Two adapters in a set (spring-hold type).
For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.
Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.
Screw-fastened adapters. Two adapters in a set. 1.5 mm Allen Wrench.
Special AC-Input Clamp-on Probes for Large-current Hot Line Measurement
For connection the external input of the WT3000 to the current sensor.