My DL750 HDD RECORDING "REALTIME" Files are missing. Please help.

My DL750 HDD RECORDING "REALTIME" Files are missing.
Please help.
 
(Or: You need to locate them and move them to my PC via USB THUMB DRIVE.)
 
DL750 REALTIME FILES ".WDF Files" are not visible on the DL750 HDD unless you have REALTIME recording enabled. They exist on a special partition.
 
Here are the keystrokes to COPY files from HD-0 to USB DRIVE:
First, enable REALTIME MODE - press ACQ and then REALTIME OUT = HD. Very important!
FILE
UTILITY
Set soft-menu button #1 (top-most) to Function=COPY.
Rotate thumb-wheel and use SELECT button to set PATH=HD-0.
(this is now indicated in top of the ‘File List’ daughter-window.
Rotate knob to highlight each file you wish to copy to the USB thumb drive.
Press SET/RESET button (soft-menu button #2)
When done selecting files, press DEST DIR (button #7, down at bottom).
Rotate Thumb Wheel and hit SELCT button to set PATH = USB.
COPY EXEC
 
NOTE – if your recordings were “REALTIME” recordings, you will not see them listed during the steps above; don’t worry, your files are still there; you MUST set REALTIME mode to “ON” first; then repeat the steps above; to turn REALTIME mode to “ON”, press ACQ and then REALTIME OUT = HD.

Related Products & Solutions

Data Acquisition (DAQ)

Data acquisition (DAQ) is the measurement, recording, analyzing, and presentation of real world phenomena. It includes electrical measurements such as voltage, current, power as well as measurements through sensors and transducers including temperature, pressure, strain, vibration, and more.

High Speed Data Acquisition

Yokogawa high speed data acquisition systems deliver industry leading isolation, bit resolution, sampling rate, and memory depth, with independent channel hardware and easy to use software.

Oscilloscopes

Oscilloscopes are a common type of test instrument used to capture, analyze, and troubleshoot electrical or real world physical signals. Oscilloscopes observe the change of electrical signals over time, continuously graphed on a display as voltage or amplitude vs. time.

ScopeCorders

A ScopeCorder is an instrument combining a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low speed trends. Yokogawa’s ScopeCorder product family provides flexible and high-performance multi-channel test instruments by combining a variety of signal conditioning input modules, on-board calculations, and deep data acquisition storage into a off-the-shelf data acquisition solution.

Top