MOTOR ROTATION JITTER ANALYSIS WITH A TIME INTERVAL ANALYZER
High speed and highly stable motors are required for magnetic disk or LBP polygon mirror devices. To measure fluctuations in the rotational speed of the motor, an encoder is provided and measurements of period, phase difference, pulse width jitter, max., min. and average of the signal output from the encoder are made (see figure below). Usually, all these items can be measured by changing measuring functions of the Time Interval Analyzer. On a manufacturing line, it is necessary to shorten the measuring time. To do this, shape the waveform as shown below and measure pulse width only. This data can be transferred to a PC and converted to interval or pulse width using calculations. 
*Period, pulse width and phase difference between A and B are calculated by the PC. Average, jitter, maximum and minimum values are also calculated based on the above results.
Solutions
The Yokogawa Model TA320 provides the following solution for this application:
veform is shaped and pulse width is measured to shorten the measuring time, it can measure 8000 periods of encoder signal. |
![]() |
Data Acquisition Equipment
Yokogawa data acquisition systems give you the most flexibility and power to measure, display, store, and even actuate any number of physical or electrical phenomena.

