KNOWLEDGEBASE
(449) Results were found. Showing 321-330.
Does the Header File .HDR Saved by a ScopeCorder Contain the Instrument Settings?
Unfortunately, the header file .HDR saved by the ScopeCorder does not contain the instrument settings. If the .WVF and .HDR file pair was saved by the DL750/DL750P/SL1400, you may reload the WVF file back into the instru...
item: 315 | http://tmi.yokogawa.com/ru/service-support/faqs/315/
Why Doesn't the Math Waveform Display in Real Time When in Free Run Mode?
In free run mode, the execution timing is different depending on the type of computation. In the case of computations such as FFT, Filter, pulse width, etc. various data are arranged in a chronological direction. Calcu...
item: 1177 | http://tmi.yokogawa.com/ru/service-support/faqs/1177/
Is it Normal for the Displayed Waveform to Change Colors if the Position of the Snapshot Waveform Captured on the DL1540C is Moved?
Yes, the color of the snapshot waveform is white so the displayed waveform will change colors if you move the position of the snapshot waveform. ...
item: 1198 | http://tmi.yokogawa.com/ru/service-support/faqs/1198/
Does Yokogawa Sell Optical Fibers?
No, unfortunately due to the number of current fiber combinations, we do not stock optical fibers. There are many companies that specialize in optical fiber cords....
item: 1078 | http://tmi.yokogawa.com/ru/service-support/faqs/1078/
How do I Disable the Soft Menu From Saving to a Screenshot for the DLM2000?
You can disable the soft menu from saving to a screenshot by setting the Mode to Normal through the Utility menu. ...
item: 946 | http://tmi.yokogawa.com/ru/service-support/faqs/946/
What is the Dimension Specification of the 701906 Long Test Clip?
The dimension specifications of the 701906 Long Test Clip is provided in the attached file. Please refer to the PDF for more information....
item: 561 | http://tmi.yokogawa.com/ru/service-support/faqs/561/
What is the Difference Between the WE7281 and the WE7282 4-Ch 100 kS/s D/A Modules?
The output connectors are different. The WE7281 has a clamp type terminal, and the WE7282 has a BNC terminal. Also, the maximum common mode voltage, and maximum voltage between channels etc. vary in their specifications ...
item: 1152 | http://tmi.yokogawa.com/ru/service-support/faqs/1152/
Is the Data Assignment the Same When the Logic Input Values are Saved in ASCII Format on the DL708/DL708E and the DL2700?
DL708/DL708E: The ON/OFF conditions of bit signals from A1 to A8 and B1 to B8 are expressed as a 16-bit value. The 16-bit value is then converted to a decimal value and the result is saved. The value is written as a numb...
item: 1220 | http://tmi.yokogawa.com/ru/service-support/faqs/1220/
Is There an Arbitrary Waveform Data Creation Tool for Output on the WE7281 and WE7121 Module?
Yes, there is a software called the 707751 Arbitrary Waveform Editor. You can create waveforms using the editor's standard functions or with the mouse. You can read in files created in CSV, or in Yokogawa's proprietary ...
item: 1164 | http://tmi.yokogawa.com/ru/service-support/faqs/1164/
How Long is the WE7251/WE7271/WE7272/WE7275 Digitizer Module's Record Length?
For high-speed data recording in trigger mode/gate mode, the digitizer module is equipped with internal memory to store measurement data in order to record reliable data without receiving any effects of the load conditio...
item: 1148 | http://tmi.yokogawa.com/ru/service-support/faqs/1148/
