CLAMP-ON TESTER FOR LEAKAGE CURRENT #30031A/30032A

  • Leakage current measurement range from 3mA to 60A
  • Diameter of measurable conductor: 40 mm max.
  • Easier and clear display

Get a Quote
Ask an Expert

 
 

Specifications

Description Leakage Current Mini Clamp-on; 3/30mA/30/60 Amp
Method of detection Mean Value
Display (Bar-graph display: 32 segments)
LCD (Digital display: 3200 counts)
Range Switching Auto-range
Operating temperature and humidity 0 - 50°, 80% RH or less (no condensation)
Influence of external magnetic field 0.0005% typical 1 (on current value of adjacent cable)
Influence of conductor position Within accuracy
Safety Standard Approved for conformity to EN 61010-1,EN 61010-2-032
Circuit voltage 300 Vrms or less
Withstanding voltage 3.7 kV AC for one minute
Power Supply One CR2032 (Coin-shaped) 3 V battery
Battery Life Approx. 90 hours (when continuously used)
Auto power-off Approx. 10 minutes
Diameter of measurable conductor 40 at maximum mm
Dimensions Approx. 70 (W) x 176 (H) x 25 (D) mm
Weight Approx. 200 g
Accessories Instruction manual, battery, Soft case
AC Current 3/30 mA, 30/60A
Frequency Characteristics 50/60 Hz
Accuracy (50/60Hz) 1.0 + 5 (0~30mA)
1.0 + 5 (0~50A)
5.0 + 5 (50~60A)
Measurement Cycle 2 times/second (Digital display), 12 times/second (Bar-graph display)
Temperature Coefficient 0.05% of range /°C or less (within the ranges of 0-18° and 28-50° for measurement of 0-50 A)
Note
  • Can measure leakage currents of 1 mA, which is useful for checking the insulation of low-voltage circuits and electrical components.
  • Can measure a broad range of currents from leakage currents (at a resolution of 0.001 mA) to load currents up to 60 A.
  • Typical influence (on the current value of an adjacent cable) from an external magnetic field is 0.0005%.
  • Durability of clamp: More than 50,000 opening/closing events
  • Twice the tensional strength of Yokogawa M&C's earlier model clamps
  • The clamp lever is lengthened by 30%, enabling smooth opening/closing of the clamp even for thick cables of 40mm in diameter.
  • Approved for conformity to safety standards EN 61010-1 and EN 61010-2-032 (CAT III 300V, pollution degree2)

 

Selection Guide

DC Current Range -
DC Current Resolution -
AC Current Range 3/30mA 30/60A
AC Current Resolution 0.001mA
AC Current Frequency characteristics 50/60Hz
AC Current Method of detection Mean Value
AC Voltage Measurement -
DC Voltage Measurement -
Continuity Check Measurement -
Frequency Measurement -
Temperature Measurement -
Recorder output Function -
Waveform monitor output Function -
Data hold Function O
Auto hold Function -
Peak Hold Function -
Maximum value memory Function -
Mean value display Function -
Filter Function -
Range Hold Function -
Auto ZERO Adjust Function -
Auto power-off Function O

 

Additional Specification

At 23°C±5°C,75%RH or less
Accuracy: ±( % rdg + dgt) = ±(% readout + value of least significant digit)

AC current 3/30mA, 30/60A
Frequency characteristics 50/60Hz
Accuracy 50/60Hz 1.0 + 5(0~30mA)
1.0 + 5(0~50A)
5.0 + 5 (50-60A)
Name Description File Type  
Clamp-On Testers Bulletin   pdf icon
832 KB
Download
Clamp-On Testers Selection Guide   pdf icon
17 KB
Download
99025 Users Manual   pdf icon
161 KB
Download
Users Manual 30031A   pdf icon
1.07 MB
Download
 

All Products Guide
All Products Guide
PDF (10.26 MB)
CALL TOLL-FREE AT
1-800-888-6400
(8:00 TO 17:00 EASTERN)
y-Link