THERMO-COLLECTOR TM20

The TM20 offers excellent data management functions:

  • Collect up to 5000 data items with time-stamp, tag name and inspector name.
  • Save 2 weeks continuous data logging with 1 minute interval (up to 20000 data items, measuring interval is 1sec. to 24 hours.).
  • Information on when, by whom and what is measured is saved along with the data.

Get a Quote
Ask an Expert

See more images:

 
 
Model Universal dual inputs
No. of Measuring Channels 2 (when A and B channels are used for thermocouple or voltage input)
1 (when D channel is used with the non-contact probe)
Measuring Range Thermal emission -20ºC to 400ºC (-4ºF to 752ºF)
Type K: -200ºC to 1372ºC (-328ºF to 2501.6ºF)
Type J: -200ºC to 1000ºC (-328ºF to 1832ºF)
Type E: -200ºC to 700ºC (-328ºF to 1292ºF)
Type T: -200ºC to 400ºC (-328ºF to 752ºF)
Voltage input ± 100 mV, ± 1 V
Resolution Thermocouple: 0.1°C
Thermal Emission: 1°C
Voltage Input: 0.1 mV or 0.001 V
Accuracy Thermocouple: -200.0 to 100.1°C: ±(0.1% of rdg + 0.7°C)
-100.0°C or above: ±(0.1% of rdg + 1.0°C)
Accuracy of reference junction compensation is included ±0.4°C when the temperature of the input terminal is in equilibrium.
Thermal emission ±(1% of rdg + 1°C) or ±3°C, depending on the accuracy of the non-contact probe.
Voltage Input ±(0.1% of rdg + 0.2% of range)
Measuring Mode Collector
Logging
Measuring Interval Collector Mode: 0.5 seconds or longer when 1 channel is used.
1 second or longer when 2 channels are used.
Logging Mode: 1 second to 24 hours when 1 channel is used.
2 seconds to 24 hours when 2 channels are used.
Data Capacity 5000 data items when used in collector mode only.
20000 data items when used in logging mode only.
Measurement data obtained in collector mode and logging mode can coexist.
Under simultaneous 2-channel measurement, 2 data items are recorded at th
Drip-proof Construction Conforms to IP54 standards (dust-proof and drip-proof requirements of IEC529)
Display LCD with backlight
Operating Temperature 0 to 50 ºC
Humidity 20 to 80% RH (no condensation)
Power Requirements Two AA-size alkaline dry batteries (LR6)
Battery Life Approx. 1.5 months when operated in logging mode at 10-minute intervals;
Approx. 1 month when operated in logging mode at 1-minute intervals;
Approx. 5 days when operated in collector mode 8 hours a day including 30 minutes of communication.
Registration of Tag Names A maximum of 50, each comprising up to 8 alphanumeric characters
Registration of Operator Names A maximum of 10, each comprising up to 8 alphanumeric characters
Registration of Comments A maximum of 32, each comprising up to 8 alphanumeric characters
Alarm Function Upper- and lower-limit alarms
Computing Function Maximum, minimum, and average
Reading of difference between the 2 channels is possible.
Communication Function Conforms to EIA RS-232C standard.
Simplified Correction Function Corrects the measured data from thermocouple input within the range of ± 20.0ºC.
Scaling function Scales the voltage input x according to the formula “Ax + B,” which is defined from the thermo-collector software.
Other Functions Chime, function lock, clock display, auto power-off, and battery alarm
Thermo-collector Software System Requirements CPU: i486DX or higher Recommended memory capacity: 16 MB or greater
OS: Windows 95/Windows 98/Windows NT 4.0 Serial I/O capability: A serial port conforming to RS-232C standard should be available.
FDD: 3.5", 1.44 MB-formatted Software: Microsoft Excel 95, Microsoft Excel 97
Required space on the HDD: 10 MB or greater  
Compliance with Standards EMC Standards
EMI (interference signal): EN55011;1998, EN61326-1;1998+A1 (Class B, Group 1)
EMS (immunity): EN50082-1;1997, EN61326;1998+A1
Approx. Height 151 mm
Approx. Width 56 mm
Approx. Depth 33 mm
Approx. External Weight 180 g
Supplied Accessories Software, two AA-size alkaline dry batteries (LR6), a waterproof cover, and an instruction manual
Optional Accessories Soft case (930 12)
Temperature probes (for K type thermocouple)
Rounded end probe (900 20, 900 21, 900 22)
Needle probe (900 23, 900 24)
Surface probe (900 30, 900 31, 900 32, 900 33)
Bead TC (2459 07)
Extension cable 5 m (2459 21) /10 m (2459 22)
  • Memory Key
    Each press of this key saves the measured data, along with 3 other monitoring items: the name of the object being measured, operator’s name, and date and time of measurement.
  • Selection of Registered Tag Name
    Select from the list of up to 50 registered tag names (objects to be measured).
  • Input Selection Key
  • Collector/Logging Mode Selector Key
    Switches between the collector mode (saves measured data when necessary) and logging mode (saves measured data continuously).
    When used in the collector mode only, saves up to 5000 data items.
    When used in the logging mode only, saves up to 20000 data items.
    Measuring interval: 1 second to 24 hours (Under simultaneous 2-channel measurement with the TM20, 2 seconds is the minimum.) Start-of-measurement time: timer can be set.
  • User-friendly FUNC Key
    You can select setup items in the same way as you choose options from the built-in menu of a cellular phone.
  • Selection of Operator Name
    With the (1) key, you can recall a list of up to 10 operator names and can also change any of these names.
  • Record-keeping On Measurement Failure Handling
    By pre-registering a list of up to 32 comments on how to handle particular measurement failures, you can keep records of how the measurement failure was dealt with by selecting the desired comment from the list using the (4) key. (The TM10 supports this feature with TM10 Version 1.10 when used with application software version 1.30 or later.)
  • Setup Keys
    Register tag names, set alarm points, and define measuring conditions, such as the measuring interval for the logging mode. These setting tasks can also be carried out from a PC.
  • Digital Input Terminal
    For connecting to an optional non-contact probe.
  • RS-232C I/O Terminals
    Used to exchange data with a PC or send data to a dedicated printer.

Standard Software (Thermo-Collector) Download

Exemption from Responsibility

  1. Yokogawa Meters & Instruments assumes no liability to any party for any loss or damage, direct or indirect, caused by the use of the product, or any unpredictable defect of the product.
  2. Modification of the product is strictly prohibited.
  3. Reverse engineering such as the disassembly or decompilation of software is strictly prohibited.
  4. No portion of the product supplied by Yokogawa Meters & Instruments may be transferred, exchanged, leased or sublet for use by any third party without the prior permission of Yokogawa Meters & Instruments.

Updating Histories

Date Version Contents
Sep, 2011 2.20b Support Windows 7 and Excel 2010
Sep, 2010 2.20a Trouble in which installation fails with OS other than English was corrected.
Sep, 2009 2.20 Ver2.20 supports Windows Vista and Excel2007

System Requirements

CPU 300MHz or higher
1GHz or higher (Vista, 7)
OS Windows XP / Vista (32bit) / 7 (32bit/64bit)
Required space on the HDD 10 MB or greater
Recommended memory capacity 128 MB or greater
1GB or greater (Vista, 7)
Serial I/O capability A serial port conforming to RS-232C standard should be available
Software Microsoft Excel 2003 / 2007 / 2010

*Windows, Excel are registered trademarks of Microsoft Corporation.

Download File

  1. Click links of "Thermo-Collector_E_V220b.zip" to download the compressed file.
  2. Unzip it and install software according to install manual.
Thermo-Collector (Ver. 2.20b) Thermo-Collector_E_V220b.zip (2.94 MB)
Name Description File Type  
Thermometer Product Manual pdf icon
1.10 MB
Download
Name Description  
FG200/FG300 Synthesized Function Generators Synthesized Function Generator Learn More
 

All Products Guide
All Products Guide
PDF (10.26 MB)
CALL TOLL-FREE AT
1-800-888-6400
(8:00 TO 17:00 EASTERN)
y-Link