DL-Term

Description

DL-Term is a command line tool for the DL series library. Please use this software as a development tool for writing communication programs using the DL series library.

System Requirement

Supported instruments
DL750/DL750P
DL1600 series
DL1700 series
DL7100/DL7200/DL7400 series
DL9000 series
DLM2000 series
DLM4000 series
DL6000/DLM6000 series
SB5000
SL1400
DL850 series
DL350

Supported Interfaces
GPIB (National Instruments GPIB board)
RS232
USB
Ethernet

* For specifics on the required firmware version of each instrument and interface, please refer to the dedicated USB drivers and library for the DL Series.

Operating System
Windows XP, Windows Vista, Windows 7, Windows 8.1 or Windows 10

Download

 

Please read Software Agreement carefully before downloading.

 

Version 1.4.0.0
Release Date Nov 20, 2017
File Name DLTerm140.zip 322.0 KB

  

Type Software

 

* Software Agreement
  • The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Electric Corporation.
  • Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
  • This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
  • Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
  • The contents of this software are subject to change without prior notice as a result of continuing improvements to the software\'s performance and functions.
  • Yokogawa bears no liability for any problems that may occur during download or installation of this software.
  • Use of the Yokogawa Web site is at the user\'s own risk.
  • Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.

Downloading of the software indicates acceptance of the software agreement.

Related Products & Solutions

DL350 Portable ScopeCorder

A compact, battery-powered, touch screen instrument you can take into the field featuring the deep measurement and recording capabilities you need in the lab.

DL7440/DL7480 Digital Oscilloscopes

8-channel 500 MHz oscilloscope with 16 logic inputs, for applications where four channels aren't enough.  Support for eight analog channels, 16 bits with 250MHz logic bandwidth, 16MP of recording memory, power analysis, serial bus analysis, and a broad selection of voltage and current probes.

DL750/DL750P ScopeCorder

The DL750 ScopeCorder: A new measurement tool combining the functions of an oscilloscope for capturing instantaneous phenomena and a data recorder for monitoring long-term trends.

DL850/DL850V ScopeCorder

Combining the capabilities of an Oscilloscope and the characteristics of a Data Acquisition Recorder, the Yokogawa Scopecorder is a versatile tool for engineers making measurements in the industrial, transportation and energy sectors.

DL850E/DL850EV ScopeCorder

An all-in-one electromechanical measurement system offering the deepest measurement and analysis features to turn data into insights.

DL9000 DSO Series

500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.

DL9000 MSO Series

500MHz, 1.0GHz, and 1.5GHz MSOs for debug and high performance applications. 4 channel models with 16 or 32 logic inputs.  10th generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time.

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

DLM4000 Mixed Signal Oscilloscopes

8 channel mixed-signal oscilloscopes for every engineer in bandwidths of 350 MHz or 500 MHz. Best-in-class performance in usability, acquisition, analysis, and display.

DLM6000 MSO & DSO Series

500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.

SB5000 Vehicle Serial Bus Analyzer

1.0GHz MSOs optimized for parallel and serial bus design and debug. Supports CAN bus, LIN, FlexRay, I2C, SPI, UART, and user-defined busses.  Display, decode, analyze, search, and trigger on popular serial bus attributes.

ScopeCorder LITE SL1400

An easy-to-use plug-in module-type chart recorder that can be used widely in maintaining plants and factories.

Top