Adapters / Connectors

AC Adapter*
* For the countries that require CE marking.

AC Adapter*
* For outside the countries that require CE marking.

• 701937,701938, 701939, 701943 (PB500) and 700939

Passt zwischen BNC und Bananenstecker-Kupplung

- Applicable connector:
12-fiber or 24-fiber (AQ9340-12)
16-fiber or 32-fiber (AQ9340-16)
- Compatible with both with and without guide pins
- Applicable fiber
SM(9.5/125µm)* , GI(50/125µm)
　* AQ9340-12
- Applicable sensor:
AQ2200-232 Optical Sensor Head (Large diameter detector, 800 to 1700 nm),
AQ2200-242 Optical Sensor Head (Large diameter detector, 400 to 1100 nm)

- Fiber count: 2, 4, 8, 12 and 24 fibers
- Applicable fiber
SM(9.5/125µm), GI(50/125µm)
- Applicable sensor:
AQ2200-232 Optical Sensor Head (Large diameter detector, 800 to 1700 nm),
AQ2200-242 Optical Sensor Head (Large diameter detector, 400 to 1100 nm),

USB communication dedicated cable between PC and the main unit

Packaging：
Infrared communication adaptor and Communications cable (USB) 1 set.
CD contents: Communication driver, User’s manual, Install manual.

Ein NDIS Steckverbinder zum direkten Anschluss eines Dehnungsmessmoduls.

For use with 4 mm diameter x 6 mm diameter PVC tubing

For use with 4 mm diameter x 6 mm diameter PVC tubing

• AQ9447 Connector Adapters
• For optical input port
• AQ6370 Series Optical Spectrum Analyzer Accessories

For AQ2170 /AQ2170H /AQ2180 /AQ2180H

For AQ2170 /AQ2170H /AQ2180 /AQ2180H

For AQ2170 /AQ2170H /AQ2180 /AQ2180H

For AQ2170 /AQ2170H /AQ2180 /AQ2180H

For AQ2170 /AQ2170H /AQ2180 /AQ2180H

For AQ4280A /AQ4280B /AQ4280C

For AQ4280A /AQ4280B /AQ4280C

For AQ4280A /AQ4280B /AQ4280C

For 701937,701938, 701939, 701943 (PB500) and 700939 Standard accessories include: Adapter, red wire (3), black wire (3)

- Adapter for a ribbon fiber folder of fusion splicer
- Fiber count: 2, 4, 8 and 12 fibers
- Applicable fiber
SM(9.5/125µm), GI(50/125µm)
- Applicable sensor:
AQ2200-232 Optical Sensor Head (Large diameter detector, 800 to 1700 nm),
AQ2200-242 Optical Sensor Head (Large diameter detector, 400 to 1100 nm)

Connector set for the 91051 (quick adapter, pressure conversion adapter, flexible hose, sealing tape)

Connector set for the 91056 (quick adapter, sealing cap, flexible hose, sealing tape, and hex wrench)

for OPM port

Kabelschuh-Adapter für den Anschluss eines 4 mm Bananensteckers. Das Set enthält einen schwarzen und einen roten Kabelschuh
1000 Vrms-CAT II.

For 701937, 701938, 701939, 701943 (PB500) and 700939.
Quantity of 1 unit: 10

A clip set designed for 701937, 701938, 701939, 701943 (PB500) and 700939

for OPM port

for OPM port

for OTDR unit

for OTDR unit

• SU2005A-FCC Universal Adapter (FC)
• for Optical Time Domain Reflectometer unit

For 702902, 702906

For 702902, 702906

Spezifiziert für 300 V. Passt zu den Messleitungen 758917. Paarweise erhältlich.

Spezifiziert für 1000 V, CAT II. Passend zu den Messleitungen 758917. Paarweise erhältlich.

Sicherheitsanschluss-Set

Sicherheitsanschluss-Set

D-Sub 9-pin connector with 2 screws
(female on connector side)

Screw-fastened type adapters for 30 A element. Black/Red two adapters in a set.

Used in temperature measurement (for CA71).

Used for temperature measurement.

Power supply from measure line(100 to 240 V)

Female-female type adapters for 5 A element. Black/Red two adapters in a set.

Two adapters to a set for 5 A current
(screw-fastened type using B9317WD)

T-Adapter für BNC-Steckverbinder. Einsatz nur in Schaltungen mit Spannungen bis maximal 42 V. 

R 1/4" male thread to 1/8” NPT female thread conversion connector (for -P1)

R 1/4” male thread to 1/4” NPT female thread conversion connector (for -P1)

1/4” NPT male thread to 1/8” NPT female thread conversion connector (for –P2)

1/2” NPT male thread to 1/8” NPT
female thread (for -P4)

1/2” NPT male thread to 1/4” NPT female thread
conversion connector (when -05 is selected)

1/2” NPT male thread to Rc1/4” female thread conversion
connector (when -05 is selected)

1/2” NPT male thread to 1/4” NPT
female thread (for -P4)

1/2” NPT male thread to Rc 1/4”
female thread (for -P4)

for OTDR port

for OTDR port

for OTDR port

for OTDR port

By connecting a GI 50 or GI 62.5 optical fiber with a relatively large NA to the NA Conversion Fiber, the NA Conversion Fiber reduces the loss that occurs at the input and improves the measurement dynamic range during passive device measurements and the stability of optical level measurements during active device measurements.

FC connector, for optical sensors
(A light shielding cap is not included)

SC connector, for optical sensors
(A light shielding cap is not included)

LC connector, for optical sensors
(Dust protection cap is not included)

MU connector, for optical sensors
(Dust protection cap is not included)