AQ2200-136 TLS Modul (EINGESTELLT)

• Wavelength range:
  • 1440 to 1640 nm (full coverage of 1550 nmband CWDM)
• Wavelength accuracy:
  • ±100 pm
• Output level:
  • +7 dBm or more (maximum output wavelength);
  • ?8 dBm or more for all wavelength range
• Wavelength sweeping speed:
  • 50 nm/second
• Create a variety of measurement systems by combining the AQ2200-136 with Yokogawa optical communication measuring instruments and various optional modules for the AQ2200 multi-application test system.

Example Measurement Application

Swept measurement synchronized with optical spectrum analyzer (standard function)

• The AQ2200-136 can perform synchronized swept measurements * when combined with Yokogawa?s AQ6317B/C, AQ6370 optical spectral analyzer. This combination enables high-dynamic-range measurements, with features such as a band elimination filter (BEF).
  Synchronized swept measurement: This function performs wavelength swept measurement while synchronizing thewavelength measured by the optical spectral analyzer to the wavelength output by the variable wavelength lightsource, without using an external controller PC.
• Measurement time: Approximately 22 seconds (typical value; obtained with the AQ6317B/C level range set to AUTO, Span set to 20 nm, and measurement points set to 1001)

• The AQ2200-136 can be combined with the AQ2200-211 sensor module or AQ2200-231optical sensor head* to perform high-speed, wideband wavelength swept measurementswithout using a controller PC.
  * The AQ2200-201 interface module is required in order to use the AQ2200-231.
• The AQ2200-136 can be used to measure a variety of optical devices and components.Example applications include:
  
  • Measurement of the insertion loss and wavelength dependence of optical filters
  • Measurement of the wavelength dependence of optical couplers and optical attenuators
  • Measurement of passed center wavelength and pass band flatness of CWDM mux/demux
• High-resolution measurement with 20,000 data points (maximum) and 1 pm wavelengthresolution (minimum)
• Measurement time:
  • Approximately 11 seconds with level range set to Hold
    (typical value; obtained with AQ2200-136 and AQ2201 set to 1440 to 1640 nm wavelength range,0.1 nm-step sweeping width, and 2000 data points)
  • Approximately 13 seconds with level range set to Auto2
    (typical value; obtained with AQ2200-136 and AQ2201 set to 1440 to 1640 nm wavelength range, 0.1 nm-step sweeping width, and 2000 data points)

• When combined with the AQ6141 wavelength meter, the AQ2200-136 can be used as ahigh-accuracy wideband variable wavelength light source, with wavelength accuracy of ±3 pm*. (Wavelengths are automatically corrected without an external PC).
  * This accuracy value does not include the wavelength accuracy of the wavelength meter.
• The internal wavelength meter monitor port can be used to perform wavelength corrections without switching measurement ports.