Symbol Editor

Description

This software is for creating and editing physical value symbol definition files for serial bus analysis based on data below.

  1. CANdb data
    Capable of loading signal definition files (.dbc) created using Vector Informatik CANdb++ or CANdb, and creating/editing physical value symbol definition data for CAN/CAN FD analysis which can be used on applicable products.
  2. FIBEX* data
    Capable of creating/editing physical value symbol definition data for FlexRay analysis which can be used on applicable products.
  3. LDF data
    Capable of loading LIN Configuration Language Specification compliant LIN Description files (LDF: LIN Description File), and creating/editing physical value symbol definition data for LIN analysis which can be used on applicable products.

* FIBEX (Field Bus Exchange Format) is one kind of common data base (format) used in bus systems such as FlexRay developed by the ASM consortium when exchanging data and information between nodes (ECU, etc.). It defines data (messages and symbols), information about the sending/receiving nodes, and other information in the xml language.

Applicable Model

DLM2024, DLM4038, DL850EV, DL350, DL9510L, DL9705L, DLM6104, DLM2022, DL6154, DLM2054, DL6104, DLM6054, DLM4058, SB5310, DLM2034, DL9505L, DL9710L, SB5710, DLM2032, DL850V, DLM2052, DL6054

Below are products and firmware version capable of loading symbol definition files.

Model Firmware version Flex
Ray
CAN CAN FD LIN LOGIC Note
DLM6000 series All versions

×

 

×

×

 
 
DL6000 series All versions

×

 

×

×

×

 
DLM4000 series before Ver.3.73

×

 

×

×

×

 
Ver.3.73 or later

×

 
 

×

×

 
DLM2000 series before Ver.3.73

×

 

×

×

×

 
Ver.3.73 or later

×

 
 

×

×

 
DL9700 series/
DL9500 series
before Ver.4.05

×

×

×

×

×

Symbol file is not supported
Ver.4.05

×

 

×

×

 
Symbol Editor Ver.1.01 only
Ver.4.24 or later

×

 

×

×

 
 
SB5000 series Ver.4.05

×

 

×

×

 
Symbol Editor Ver.1.01 only
Ver.4.24 or later
 
 

×

×

 
 
DL850 series Ver.4.30 or later

×

 
 
 

×

Symbol Editor Ver. 1.51 or later
DL350 Ver.1.20 or later

×

 
 
 

×

Symbol Editor Ver. 1.51 or later

o = supported
x = not supported

System Requirements (Personal Computer)

CPU
Pentium 4, 2 GHz or faster

Operating System
Windows Vista(32/64bit), or Windows 7(32/64bit), or Windows 8/8.1(32/64bit)

Memory
512 MB or more (1 GB or more recommended)

Microsoft corporation's MSXML 6.0 must be installed to use the FIBEX file import function.

Revision History

Version Release Date Content
1.51 May 11, 2018
  • DL350 is supported.
1.50 Jul. 3, 2015
  • CAN FD is supported.
    • Version 3.73 or later is required for DLM2000.
    • Version 3.73 or later is required for DLM4000.
1.40 Mar. 5, 2012
  • LIN LDF is supported.
    • Version 2.00 or later is required for DL850V.

Previous version 

Download

 

Please read Software Agreement carefully before downloading.

 

Version 1.51
Release Date May 11, 2018
File Name SymbolEditor_151.zip 3.6 MB

  

Type Software

 

* Software Agreement
  • The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Test & Measurement Corporation.
  • Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
  • This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
  • Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
  • The contents of this software are subject to change without prior notice as a result of continuing improvements to the software's performance and functions.
  • Yokogawa bears no liability for any problems that may occur during download or installation of this software.
  • Use of the Yokogawa Web site is at the user's own risk.
  • Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.

Downloading of the software indicates acceptance of the software agreement.

Industries

Related Products & Solutions

720240 CAN Bus Monitoring Module

Use the CAN bus monitor module to decode the CAN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.
To be used with DL850V & DL850EV ScopeCorder Vehicle Edition only.

720241 CAN/LIN Bus Monitor Module

Use the CAN/LIN bus monitor module to decode the CAN or LIN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.
Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

720242 CAN/CAN FD Monitor Module

Use the CAN/CAN FD Monitor Module to decode the CAN/CAN FD-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors. Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

DL350 Portable ScopeCorder

A compact, battery-powered, touch screen instrument you can take into the field featuring the deep measurement and recording capabilities you need in the lab.

DL850/DL850V ScopeCorder

Combining the capabilities of an Oscilloscope and the characteristics of a Data Acquisition Recorder, the Yokogawa Scopecorder is a versatile tool for engineers making measurements in the industrial, transportation and energy sectors.

DL850E/DL850EV ScopeCorder

An all-in-one electromechanical measurement system offering the deepest measurement and analysis features to turn data into insights.

DL9000 MSO Series

500MHz, 1.0GHz, and 1.5GHz MSOs for debug and high performance applications. 4 channel models with 16 or 32 logic inputs.  10th generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time.

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

DLM4000 Mixed Signal Oscilloscopes

8 channel mixed-signal oscilloscopes for every engineer in bandwidths of 350 MHz or 500 MHz. Best-in-class performance in usability, acquisition, analysis, and display.

DLM6000 MSO & DSO Series

500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.

SB5000 Vehicle Serial Bus Analyzer

1.0GHz MSOs optimized for parallel and serial bus design and debug. Supports CAN bus, LIN, FlexRay, I2C, SPI, UART, and user-defined busses.  Display, decode, analyze, search, and trigger on popular serial bus attributes.

Data Acquisition (DAQ)

Data acquisition (DAQ) is the measurement, recording, analyzing, and presentation of real world phenomena. It includes electrical measurements such as voltage, current, power as well as measurements through sensors and transducers including temperature, pressure, strain, vibration, and more.

Mixed Signal Oscilloscopes

A mixed signal oscilloscope is an instrument enabling the simultaneous, time correlated observations and analysis of analog with digital (logic) signals, to establish causal relationships between the various areas of a device's electronics. They are purpose-built tools for troubleshooting electrical anomalies, measuring parametric values, and monitoring cause and effect relationships between signals.

 
Top