DLM2000 SNTP Example Setup

SNTP (SNTP)
The DLM2000 clock can be set using Simple Network Time Protocol (SNTP). The DLM2000 can be configured to automatically adjust its clock when it is turned on.

SNTP Server (SNTP Server)
Specify the IP address of the SNTP server that the DLM2000 will use. In a network with a DNS server, you can specify the host name and domain name instead of the IP address.

Timeout (Timeout)
If the DLM2000 cannot connect to the SNTP server for a certain amount of time, it aborts the operation.

Executing Time Adjustment (Adjust)
The DLM2000 clock is synchronized to the SNTP server clock.
Automatic Adjustment (Adjust at Power ON)
You can configure the DLM2000 so that its clock is automatically synchronized to the SNTP server clock when the DLM2000 is turned on when it is connected to the network.

If the time difference from GMT (Greenwich Mean Time) is set in the date/time setting, the DLM2000 will make appropriate adjustments to the time information received from the SNTP server. Please see the attachment example.

Related Products & Solutions

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

Mixed Signal Oscilloscopes

A mixed signal oscilloscope is an instrument enabling the simultaneous, time correlated observations and analysis of analog with digital (logic) signals, to establish causal relationships between the various areas of a device's electronics. They are purpose-built tools for troubleshooting electrical anomalies, measuring parametric values, and monitoring cause and effect relationships between signals.

Oscilloscopes

Capture, analyze, and troubleshoot electrical or real-world physical signals. Oscilloscopes observe the change of electrical signals over time, continuously graphed on a display as voltage or amplitude vs. time.

 
Top