Description
This firmware is intended to upgrade the AQ1200 to the latest version.
How to check the current firmware version.
- Press [SETUP] key and [Product info.] software key to display the firmware version.
In case updating firmware from R1.11(or less) to R1.12(or later), internal memory must be formatted before update.
Please do the file backup and memory format as following procedure before update.
- File backup:
- File backup to PC with USB storage function:
- Turn on AQ1200
- Select [OTDR] by using [Enter] or rotary key
- Press [SETUP]
- Press [F4] (System setup)
- Move the cursor to [USB]
- Select [Storage] by using [Enter] or rotary key
- Connect AQ1200 to PC with USB cable
- Copy the file in AQ1200 to PC by PC operation.
- File backup to USB memory:
- Turn on AQ1200
- Select [OTDR] by using [Enter] or rotary key
- Press [F5] (FILE)
- Press [F1] (Action)
- Select [Copy] or [Copy Folder] by using [Enter] or rotary key
- Copy the file to USB memory.
- Format the internal memory:
- Turn on AQ1200
- Select [OTDR] by using [Enter] or rotary key
- Press [F5] (FILE)
- Press [F1] (Action)
- Select [Format] by using [Enter] or rotary key
- Press [F5] (Format)
Revision History
Version |
Content |
R03.03 |
[Improved function]
- The quality of still picture using Fiber Inspection Probe DI-1000
[Added function]
- Reference value setting for each wavelength in optical power meter
- Launch fiber setting in event analysis function
- Addition of Pass / Fail conditions (dB/km, Total loss) in event analysis function
- Contrast function using Fiber Inspection Probe DI-1000
|
R03.02 |
[Improved function]
- Fiber Inspection Probes
Added support for DI-1000 (Lightel.Inc).
[Added function]
- Operation Restrictions function
|
R03.01 |
[Improved function]
- Improved the Invent detection.
[Added function]
- Added support for the /SPM, /SLS or -HM options.
|
Download
Please read Software Agreement carefully before downloading.
Version |
R03.03 |
Release Date |
Mar 27, 2017 |
File Name |
aq1200_firm_303.zip |
4.84 MB |
|
Type |
Firmware* Registration is required to download. |
* Software Agreement
- The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Electric Corporation.
- Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
- This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
- Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
- The contents of this software are subject to change without prior notice as a result of continuing improvements to the software\'s performance and functions.
- Yokogawa bears no liability for any problems that may occur during download or installation of this software.
- Use of the Yokogawa Web site is at the user\'s own risk.
- Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.
Downloading of the software indicates acceptance of the software agreement.