This firmware is intended to upgrade the DL750 series ScopeCorder to the version which is said in the above "Versions and Corresponding Functions" page.
Remarks
Please read installation procedures throughout before performing the installation. Each zip file contains firmware program file and an installation procedure.
Firmware Versions and Corresponding Functions
To check the firmware version number, choose MISC -> OVERVIEW on the DL750. The modules and features in the table cannot be used unless supported by your DL's firmware version.
Starting with this version (6.02), the firmware code for the DL750 and DL750P has been unified. So you can use same code for DL750 and DL750P both.
Firmware Version
Option
Description
Version
Standard
- A minor bug is fixed.
6.42 or later
Standard
- RJC performance improvement for the 701261/701262 modules
6.41 or later
Standard
- Support special module (High-voltage module with AAF)
6.31 or later
Previous version
Previous version
Option
Description
Version
Standard
- Performance improvement in the GO/NO-GO function
6.23 or later
Standard
- Adds USB printer drievers
6.22 or later
Standard
- Adds Display Scale setting and availability of changing font size of Trace Label
- Supports External Sampling function of Phase Shift Display
- Adds "DUTYH" and "DUTYL" function for User Defined Computation
- DL750P: Adds T-Y Print format (Extra Area function for 2, 3, 4 Zones)
- DL750P: Adds font change setting at the X-Y Recorder Mode
- DL750P: Adds History "All" avalability for PDF output
6.20 or later
Standard
- Bug fix for communication command on V6.02
("WAVeform:SEND?" command)
6.03 or later
Standard
- Unified Version for the DL750 and DL750P
- Update about DL750
Supports universal modules (701261 and 701262)
Zoom Print and Fine Print modes have been added
Linear scaling (supports engineering units T, G, M, k, m, u, n, p)
- Update about DL750P
Supports PDF output (color) when in XY recorder mode/T-Y mode
- Update about DL750/DL750P
Supports FFT overall value
6.02 or later
Standard
- Update about DL750P
Supports universal modules (701261 and 701262)
Supports Recorder mode
Supports XY recorder mode
Supports PDF output (color) in Reprint mode
Zoom Print and Fine Print modes added
Supports USB storage (DL750P only)
Display format (supports 16 divisions)
Linear scaling (supports engineering units T, G, M, k, m, u, n, p)
5.01 or later
Standard
- Support START/STOP Key Response Time Setting
You can enter a setting to specify whether the instrument responds immediately when the START/STOP key is pressed, or whether the instrument only responds if the key is pressed for one second or longer.
4.02 or later
Standard
- Improvement of DualCapture Function
Changed the number of sub waveform screens
/M1 model: Up to 250
/M2 and /M3 model: Up to 500
User can select the display format and the traces to be displayed on the sub waveform window. Displays the list of captured waveforms: Show Map
Mail transmission using the dual capture trigger function: Send Mail
Automated measurement of waveform parameters on the sub waveform (the results are displayed in italics)
- Addition of Parameter Search of the History Memory Function
- Addition of Cursor Functions
Added H&V cursor measurement to T-Y waveforms
Support for H cursor and H&V cursor measurement in roll mode
- Addition of the Action On Stop Function
In Log mode, the DL750 automatically executes the set operation when measurement stops.
- Added of Function to Change the Size of the Extra Window
4.01 or later
/C10
- Addition of Network Functions
WebDAV server function, SNTP function
Mail attachment of image data
4.01 or later
/G2, /G3
- Displays the Hz Value of the Cut-off Frequency When Applying Filters to DSP or MATH Channels
4.01 or later
Standard
- Numeric monitor display
- Added exponential window to FFT
computation/increased number of points in FFT computation (up to 100 kpoints)
- Normal statistical processing/statistical processing of history memory
- Increased the number of parameters for automated measurement/statistical processing of waveform parameters (up to 24000 to up to 48000)
- Added waveform data save formats for action-on-trigger and GO/NO-GO determination (select from binary, ASCII, and floating point)
- Support for inverted display on the strain module
- Support for the Current Probe (Model 701931)
3.01 or later
/G3
Support for enhanced triggers (OR trigger and window trigger), Knocking filter
3.01 or later
Standard
- Seven Languages Supported for Online Help and Online Messages (Japanese, English, Chinese, German, French, Italian, and Korean)
- Four Languages Supported for Menu Items (English, Japanese, Chinese, and Korean)
3.10 or later
Standard
Wave window trigger, cycle statistics, Chinese menu support
Please read Software Agreement carefully before downloading.
Version
6.42
Release Date
Aug 22, 2011
File Name
DL750v642_pczip-e.zip (for ZIP/PC card)
5.06 MB
DL750v642_fd-e.zip (for floppy disk)
5.09 MB
Type
Firmware* Registration is required to download.
* Software Agreement
The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Electric Corporation.
Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
The contents of this software are subject to change without prior notice as a result of continuing improvements to the software\'s performance and functions.
Yokogawa bears no liability for any problems that may occur during download or installation of this software.
Use of the Yokogawa Web site is at the user\'s own risk.
Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.
Downloading of the software indicates acceptance of the software agreement.
The DL750 ScopeCorder: A new measurement tool combining the functions of an oscilloscope for capturing instantaneous phenomena and a data recorder for monitoring long-term trends.
