SB5000 Vehicle Serial Bus Analyzer


This firmware is intended to upgrade the SB5000 Vehicle Serial Bus Analyzer to the latest version.


Please read installation procedures throughout before performing the installation.
Each zip file contains firmware program file and an installation procedure.

Revision History

Version Date Contents
4.42 Jun 1, 2009
  • The following FlexRay bus analysis functions are reinforced:
    • SI Voting Procedures analysis function
    • Improvement for FIBEX symbol definition
    • Improvement for eye-diagram analysis function
  • The following SPI bus analysis functions are reinforced:
    • Analysis function without CS(Chip Select) source assignment
    • Analysis function with changing the data field sizen
4.24 Aug 4, 2008
  • FlexRay FIBEX symbolic triggering/analysis/trend display functions are added.
  • ASCII display and grouping display for the UART functions are added.
  • Simultaneous analysis of LIN rev.1.3/2.0 is supported.
  • "Jitter2" is added for the eye-diagram parameter measurement items.
  • Staff bit display function is added for the CAN decode analysis.
  • Auto Scaling function of CAN (DBC)/FlexRay (FIBEX) trend waveforms is added.
  • Improvement of the calculation accuracy when switching devices are turned on/off. (/G4 option)
4.05 Jan 31, 2008
  • Initial production release



Please read Software Agreement carefully before downloading.


Version 4.42
Release Date Jun 1, 2009
File Name 11.9 MB


Type Firmware* Registration is required to download.


* Software Agreement
  • The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Electric Corporation.
  • Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
  • This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
  • Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
  • The contents of this software are subject to change without prior notice as a result of continuing improvements to the software\'s performance and functions.
  • Yokogawa bears no liability for any problems that may occur during download or installation of this software.
  • Use of the Yokogawa Web site is at the user\'s own risk.
  • Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.

Downloading of the software indicates acceptance of the software agreement.

Related Products & Solutions

SB5000 Vehicle Serial Bus Analyzer

1.0GHz MSOs optimized for parallel and serial bus design and debug. Supports CAN bus, LIN, FlexRay, I2C, SPI, UART, and user-defined busses.  Display, decode, analyze, search, and trigger on popular serial bus attributes.