DL7100/DL7200 Digital Oscilloscope (DISCONTINUED)

Notice: This product was discontinued on 04.09.01. See these replacement products:

B9852MJ Power Cable for Differential Probes

The B9852MJ cable supplies power to the 700924, 700925 and 701921 differential probes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)
* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or 9VDC"at the probe input power connector. 

B9850NX Legacy DL/DLM Printer Paper

Quality paper for the DLM6000/DL9700/DL9500/DL1700(E)/DL1600/DL1500 and DL7400

B9852ES Logic Probe IC Pin Clips

Attached to the tips of logic probe (701988 or 701989) or mini-clips (B9852CR), the IC clips can be used to clip contiguous 0.5-mm pitch terminals. A total of 10 clips are included.

B9969ET Soft case for the DL7400 series

Ideal for storing accessories (probes, etc).

366924 BNC to BNC 1m Cable

BNC-BNC 1m. For connection to simultaneously measurement with 2 units, or for input external trigger signal. 

366925 BNC to BNC 2m Cable

BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

700924 Differential Probe 1400V / 100 MHz

Differential probe powered by Yokogawa Digital Oscilloscopes, ScopeCorders, external power supply or internal battery.

700925 Differential Probe 1000V / 15 MHz

Differential probe powered by internal battery.

700939 Active FET Probe 10V / 900 MHz

Active Probe, 10Vp, 900MHz, 10:1, 2.5MΩ / 1.8pF, 1.5m, FET Probe w/ LEMO power pig-tail

400 MHz Passive Probe 700988

A 400 MHz passive probe designed for the DL1700E series, and DL7400 series SignalExplorers with switchable attenuation ratio of 1/10 and 1/1.

701920 Differential Probe 12V / 500 MHz

Differential Probe, 12Vp Differential, 30Vp Common-Mode, 500MHz, 10:1, 100kΩ, w/ built-in power cable (LEMO lead)

701921 Differential Probe 700V / 100 MHz

Bandwidth: DC to 100 MHz (-3 dB)

701922 Differential Probe 20V / 200 MHz

The 701922 is a 10:1 Differential Probe rated at 20Vpeak differential voltage input and 60Vpeak Common-Mode input with 200MHz bandwidth (-3dB). This probe is recommended for CAN bus and can be used with virtuallly any oscillscope with an internal 50Ω termination or use the external 50Ω 700976. This probe is powered via a built in pig-tail LEMO lead. This probe can be powered with Yokogawa scope option /P2 or /P4, or an external power supply 700938-3-D or 701934-D. The probe is supplied with one each pinchers, B9852MF black and B9852MG red and a 50cm ground extension.

701926 Differential Probe 7000V / 50 MHz

High Voltage Differential probe powered by Yokogawa Digital Oscilloscopes, ScopeCorders, external power supply or internal battery.

701930 Current Probe 10 MHz / 150 ARMS

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

701931 Current Probe 2 MHz / 500 ARMS

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

701932 Current Probe 100 MHz / 30 ARMS

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

701933 Current Probe 50 MHz / 30 ARMS

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

701944 High Voltage Passive Probe 1000Vrms / 400 MHz

Passive Probe, 1000Vrms, 400MHz, 100:1, 50MΩ, 1.2m, 'Mini'
For DL1700, DLM2000, DLM4000, DL/DLM6000,DL9000 and SB5000.
See also 701945 for 250 MHz version of this same probe.

701945 High Voltage Passive Probe 1000Vrms / 250 MHz

Passive Probe, 1000Vrms, 250MHz, 100:1, 50MΩ, 3.0m, 'Mini' with extra-long 3m lead.  Compatible with DL1700, DLM2000, DLM4000, DL/DLM6000, DL9000 and SB5000. See also 701944 for 400 MHz version of this same probe.

701934 External Probe Power Supply

A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.

701919 Probe Stand

Using a probe stand with a flexible arm and heavy base to hold and stabilize probes can simplify circuit board testing.

366923 BNC to T Adapter

T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V.

Looking for more information on our people, technology and solutions?


Contact Us
 
Top