The SL1400 ScopeCorder LITE is a plug-in module type chart recorder with a large built-in A4 sized high resolution thermal printer. It provides more simplified and intuitive, easy-to-use operational functions.
Store data in memory and print it in just three steps!
Color PDF Output
When performing on-site measurements, you can print out the data and hand-write memos on the paper. Since the SL1400 simultaneously stores data to internal memory while printing, you can keep electronic and hard copy records with just a single action. (Remember that with thermal-sensible paper, it is vital to make photocopies for longterm preservation.) The SL1400 allows you to export results to files in PDF format, making it easy to save data for long periods of time, transfer the data to distant locations, or load them onto a PC. It is also easy to create reports since waveform data can be converted to an A4-size layout. |
This function backs up about 150 hours of data saved to the acquisition memory immediately prior to power loss. Memory backup helps you avoid losing important data even if the power supply is unstable and gets cut off. (Backup time varies according to the usage environment. Four AA batteries are required for memory backup.)
Connect the SL1400 to your PC through the Ethernet connection. This allows for easy remote operation using Internet Explorer.
Having a wide range of triggers is of course very useful for obtaining the desired waveforms. In addition, the GUI menu makes setting trigger conditions easy and intuitive.
This function comes standard with the SL1400 and enable triggering on power supply waveforms. In addition to traditional power supply troubles, such as sudden outages, sags, and surges, you can make efficient real time observations of frequency fluctuations and voltage drops. This trigger activates when a signal exceeds the allowable values determined by comparing a defined waveform (wave window) with an actual waveform in real time.
Comparative waveforms can be automatically produced in real time based on measured waveforms. Detection on all 16 analog channels is available (with OR conditions).
When this trigger is activated, the SL1400 performs a specified action each time a waveform is captured and displayed on the screen. This feature is useful for saving data automatically and reliably (e.g., for data collection in automated, continuous tests).
With this feature, a trigger can be executed whenever you like, independent from the set trigger conditions.
Real-Time Hard Drive Recording
With the optional internal hard drive, you can record measurements to the hard drive in real time.
This makes it easy to manage and analyze data using a PC.
Connecting to a PC as a Web Server and FTP Server
The SL1400 has a variety of server functions that let you perform remote controls or download waveform data and screen images onto a PC. You can also access the SL1400 using Internet Explorer. Same as with RS232 and GB-IB, you can write your own custom programs in Visual C++ 6.0 or Visual Basic 6.0 and control the SL1400 through an Ethernet interface.
Probe power terminal for probe driving.
High-Speed 10 MS/s 12-Bit non-isolation Module (2 ch)
Non-Isolation version of model 720250
Applicable to DL350, DL850 series, DL950 and SL1000.
Temperature/high-precision voltage Module (2 ch)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (1 mV), and low noise (±4 µVtyp)
Applicable to DL350, DL850 series, DL950 and SL1000.
Strain Module with Shunt Calibration, type DSUB (2 channels) to be used in combination with 701957 or 701958 DSUB bridge head.
Using the strain module and strain gauge the ScopeCorder can detect and display mechanical stress (strain). It works on the principle that the resistance value of a metal foil changes as it expands and contracts.
Applicable to DL350, DL850 series, DL950 and SL1000.
Set contains one black and one red clip.
1000 Vrms-CAT II.
For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.
8-bit, non-isolated, response speed: 1µs, threshold level approx 1.4V
Two measurement leads (B9879PX and B9879KX) included.
A subassembly of 1.2 m long test leads with alligator-clip adapters.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for SL1000 & SL1400.
Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.