Communication Sample Programs
Description
The following programs are communication sample programs written in Visual Basic (VB) and Visual C++ (VC++)'s project format. Please refer to the User's Manual(IM 701990-01E) for detailed information, which can be extracted from "dlsample106.zip" file.
- System Requirements:
Visual basic (VB) and Visual C++ (VC++) on the Windows operating system.
(National Instruments GP-IB board or PCMCIA card is required when using GP-IB interface.) - Supported models:
DL9000 series ,DL7000 sereis, DLM6000/DL6000 series, DLM4000 series, DLM2000 series, DL1700E series, DL1700 series, DL1600 series, SB5000, DL750 series, DL850 series, SL1400 - Software, driver requirements:
"TMCTL", which is the Yokogawa original driver software, is required to use these sample programs. Download here. A dedicated USB driver is required when using USB interface. The USB driver can be downloaded from here. - Supported communication interfaces:
Ethernet, USB, GP-IB and SERIAL
Applicable Model
dlsample106.zip
Applicable models:DL850/DL750/DL7400/SL1400/DLM2000/DLM4000 series
DL9000Sample105.zip
Applicable model: DL9000 series, DL6000/DLM6000 series and SB5000
Download
Please read Software Agreement carefully before downloading.
| Release Date | Jan 31, 2013 | ||
| File Name | dlsample106.zip | 1.1 MB |
|
| DL9000Sample105.zip | 1.0 MB |
|
|
| Type | Software | ||
* Software Agreement
- The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Electric Corporation.
- Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
- This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
- Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
- The contents of this software are subject to change without prior notice as a result of continuing improvements to the software\'s performance and functions.
- Yokogawa bears no liability for any problems that may occur during download or installation of this software.
- Use of the Yokogawa Web site is at the user\'s own risk.
- Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.
Downloading of the software indicates acceptance of the software agreement.
Related Products & Solutions
DL7440/DL7480 Digital Oscilloscopes
8-channel 500 MHz oscilloscope with 16 logic inputs, for applications where four channels aren't enough. Support for eight analog channels, 16 bits with 250MHz logic bandwidth, 16MP of recording memory, power analysis, serial bus analysis, and a broad selection of voltage and current probes.
DL750/DL750P ScopeCorder
The DL750 ScopeCorder: A new measurement tool combining the functions of an oscilloscope for capturing instantaneous phenomena and a data recorder for monitoring long-term trends.
DL850/DL850V ScopeCorder
Combining the capabilities of an Oscilloscope and the characteristics of a Data Acquisition Recorder, the Yokogawa Scopecorder is a versatile tool for engineers making measurements in the industrial, transportation and energy sectors.
DL850E/DL850EV ScopeCorder
An all-in-one electromechanical measurement system offering the deepest measurement and analysis features to turn data into insights.
DL9000 DSO Series
500MHz, 1.0GHz, and 1.5GHz DSOs for debug and high performance applications. 10th
generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time. Winner of Test & Measurement World's "Best in Test" award.
DL9000 MSO Series
500MHz, 1.0GHz, and 1.5GHz MSOs for debug and high performance applications. 4 channel models with 16 or 32 logic inputs. 10th generation oscilloscope from Yokogawa with industry leading 2.5 million wfms/sec and lowest dead time.
DLM2000 Mixed Signal Oscilloscopes
200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.
DLM4000 Series Mixed Signal Oscilloscope
8 channel mixed-signal oscilloscopes for every engineer in bandwidths of 350 MHz or 500 MHz. Best-in-class performance in usability, acquisition, analysis, and display.
DLM6000 MSO & DSO Series
500MHz, 1.0GHz, and 1.5GHz DSO and MSO models for debug, waveform characterization, bench top, or automated test applications. 4 channel models with 16 or 32 logic inputs. 12th generation oscilloscope with ergonomic physical and on-screen improvements.
SB5000 Vehicle Serial Bus Analyzer
1.0GHz MSOs optimized for parallel and serial bus design and debug. Supports CAN bus, LIN, FlexRay, I2C, SPI, UART, and user-defined busses. Display, decode, analyze, search, and trigger on popular serial bus attributes.
ScopeCorder LITE SL1400
An easy-to-use plug-in module-type chart recorder that can be used widely in maintaining plants and factories.