How to Select Current Probe Attentuation on DLM2000 Mixed Signal Oscilloscope Via Communication?

When using voltage probes, please set the channel probe mode using the command :CHANnel<x>:PROBe 10.00 or 0.01.

When using current probe, please set the channel probe mode using the command :CHANnel<x>:PROBe C10 or C0_01.

:CHANnel<x>:PROBe[:MODE]

Funciton. It sets or queries a probe's attenuation rate of each channel.
Construction. :CHANnel<x>:PROBe[:MODE] {<NRf>|C0_001|C0_002|C0_005|C0_01|C0_02|C0_05|C0_1|C0_2|C0_5|C1|C2|C5|C10|C20|C50|C100|C200|C500|C1000|C2000}
:CHANnel<x>:PROBe[:MODE]?
<x> ＝from 1 to 4 (1 or 2 for DLM2022, DLM2032, and DLM2052)

Related Products & Solutions

DLM2000 Mixed Signal Oscilloscopes

200, 350, and 500MHz mixed-signal oscilloscopes for every engineer. Best-in-class performance in usability, acquisition, analysis, and display—all at a price you can digest. Options include serial bus, vehicle bus, and power supply analysis functions.

Mixed Signal Oscilloscopes

Yokogawa mixed signal oscilloscopes
Simultaneous, time correlated observations
Analysis of analog with digital (logic) signals
Troubleshooting electrical anomalies, measuring parametric values, monitoring signals

Oscilloscopes

Digital oscilloscopes
High-speed sampling
Range of bandwidths for electronic device design and development
Advantages of oscilloscope and multi-channel data recorder