DL950 ScopeCorder

Description

This firmware is intended to upgrade the DL950 series to the latest version.

Applicable Model

DL950

Remarks

To check the firmware version number, choose UTILITY -> OVERVIEW on the DL950 series.
The modules and features in the table cannot be used unless supported by your DL's firmware version.
Please read the installation procedure, which is being included in the zip file, throughout before performing the installation.

Revision History

Suffix code	Content	Version
Standard	A feature for saving FFT computation results added to the action settings Peak List added to the FFT cursor measurement types	1.30
/G03、/G05	Rotary Angle (Z Pulse) added to electrical angle, Sin and Cos encode types of real time math Envelope curve added to real time math A feature added for switching the display type (exponential or decimal) for showing real time math results
/VCE	CAN FD/LIN Monitor Module (720245) A sub channel copying feature added to 720240 (CAN), 720242 (CAN/CAN FD), 720245 (CAN FD/LIN), and 720241(CAN & LIN) modules
Standard	Fixed some bugs when using file saving and Communication Interface function.	1.22
/G02	Fixed some bugs when using User-defined math function.	1.22
/ST2	Fixed some bugs when using the flash acquisition function.	1.21
/C50	Fixed some bugs when Multi-unit synchronization.
Standard	Fixed some minor bugs.

Previous version

Suffix code	Content	Version
/C50	A feature for selecting the destination unit for saving setup data	1.20
/G03 /G05	Up down count in real time math Z Pulse added to the available angle-of-rotation encode types in real time math Analog source settings added to the electrical angle’s source conditions of real time math (when the logic source is set to OFF) Real time math channel copy feature
/G05	3V3AR, 3P3W→3P4W, and 3V3AR→3P4W added to the available wiring systems for power math Slope in the power analysis calculation period settings A feature for displaying voltage and current waveforms after delta-star transformation
/VCE	High Speed 12 bit SENT signals
Standard	A feature for saving all history waveform in ASCII format Start point, end point, and sample interval of each channel in MATLAB files A feature for holding the waveform display during waveform acquisition in Recorder mode A cursor jump feature for displaying the cursor position at the zoom center Flicking on the touch panel (only on a portion of the list displays) A feature for selecting the waveform to be configured by tapping on the touch panel
/ST2	Fixed some bugs when using the backup feature for waveforms recorded to memory.	1.11
/C50	Fixed some bugs when Multi-unit synchronization.	1.11
/ST2	Real-time recording feature.(flash acquisition) Backup feature for waveforms recorded to memory.(at power-off by the front panel switch)	1.10
/C35	GPS position information acquisition feature.
/G03 /G05	Angle math, IIR filter, and CAN ID for real time math. Multiplication factor and offset settings for angle of rotation of real time math. Multiplication factor setting for resolver and 3 phase resolver of real time math.
/G05	RTmath (when Rotary Angle or Resolver is selected) for edge detection source of power analysis.
/VCE	Preference setting for CAN Bus Monitor Module.
Standard	Probe’s attenuation ratio and current-to-voltage conversion ratio settings.
/C50	Fixed some bugs when Multi-unit synchronization.	1.02
/C60	Enhanced PC streaming function.
Standard	Fixed some bugs when using the web server function. Changed some specifications of sample clock output.

Download

Please read Software Agreement carefully before downloading.

Version	1.30
Release Date	Mar 10,2023
File Name	DL950_UPDATE_1_30.zip	52.4 MB
Type	Firmware* Registration is required to download.

* Software Agreement

The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Electric Corporation.
Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
The contents of this software are subject to change without prior notice as a result of continuing improvements to the software\'s performance and functions.
Yokogawa bears no liability for any problems that may occur during download or installation of this software.
Use of the Yokogawa Web site is at the user\'s own risk.
Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.

Downloading of the software indicates acceptance of the software agreement.

Related Products & Solutions

DL950 ScopeCorder

The Yokogawa DL950 ScopeCorder captures and analyzes a wide variety of electrical, physical sensor signals, and serial buses. It offers a unique combination of high sampling rates, for a detailed view and long recording times to monitor trends over time.