HANDY CALIBRATOR CA150
Signal source: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Measurement: DCV, DCA, OHM, RTD, TC (10 kinds), Frequency, Pulse
Features: Highly accurate within 0.02% of the DC voltage range for source and measure.
Source and measurement can be performed simultaneously.
Vertical type with large-screen display.Loop power supply function (24 VDC at a load of up to 22 mA)
It is possible to measure current in the mA range while supplying power.Sink function.
Sweep functions that allow 3 types of continuous outputs.
Options: 94010 AC adapter, 94015 NiMH Battery, 93027: Main Body case with strap
Specifications - Model CA150
|Power Supply||6 AA size alkaline batteries
AC adapter (sold separately)
AC adapter specification: 100 to 240 VAC, 50/60 Hz, 1.4 A
Dedicated NiMH battery (sold separately)
OUTPUT: 12 VDC, 3 A
|Auto power-off||Approx. 10 minutes; it can be canceled by setting.|
|Operating Temperature/Humidity Range||0 to 40°C, 20 to 80 % RH (no condensation)|
|Storage Temperature Range||-20 to 60°C 90%RH or less (no condensation)|
|External Dimensions||251 x 124 x 70 mm|
|Weight||Approx. 1000 g|
|Conforming Standards Safety||Softy EN61010-1
EMC EN 61326 Class B;EN 55011 Class B Group1
EN 61000-3-2; EN 61000-3-3, EN61326
|Vertical Hand-Held Calibrator||Easy-to-hold vertical body is designed to make it intuitively easy to operate, as individual functions are accessed directly by pressing assigned keys.
Using the main body case (model No. 93027) (sold separately), you can hang CA150 to your body or a handrail to keep it handy.
|Simultaneous Source and Measurement for Process Devices||In conventional calibration applications, multiple devices such as a standard generator, dial resistor and multi-meter were required. Now with a single CA150 unit, it is possible to perform operation check at regular inspection and maintenance of thermocouples, RTDs and instruments, as well as maintenance and equipment diagnosis of process devices such as transmitters, thermostats and signal converters.|
|Loop Power Supply Function||It is possible to measure generated current signals while supplying loop power 24 VDC from a two-wire type transmitter (up to 22 mADC).|
|Highly Accurate and Multi-Functional Source and Measurement||High accuracy: 0.02% for the source unit and 0.02% for the measurement unit
Source and Measurement functions: DCV voltage, DC mA, ohm, frequency and temperature (thermocouple, RTD) and 24 VDC power supply function for transmitters
|Output Functions|| Automatic Output Functions
|Communication Functions||Serial interface RS232 D-Sub 9-pin connector|
|Memory Function||Data can be stored and loaded in setting memory (setting data) and data memory (source/measurement).