OSCILLOSCOPE ACCESSORIES

Oscilloscopes accessories include a probe stand, cables, cases, various adaptors and more.

701963 Soft carrying case for DL850E Series

701963 Soft carrying case for DL850E Series

Three pockets are provided for storing accessories and the user’s manual.

701968 Soft carrying case for DLM4000

701968 Soft carrying case for DLM4000

Three pockets are provided for storing accessories and the user’s manual.

701934 External Probe Power Supply

701934 External Probe Power Supply

A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.

701901 BNC to Safety Banana 1.8m Cable, 1:1

701901 BNC to Safety Banana 1.8m Cable, 1:1

1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.

758917 DMM Measurement Lead Set

758917 DMM Measurement Lead Set

A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.

758921 Fork terminal adapter

758921 Fork terminal adapter

Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip. 1000 Vrms-CAT II.

758929 Large Alligator Clip Adapter 1000V

758929 Large Alligator Clip Adapter 1000V

Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.

758922 Small Alligator-Clip Adapter 300V

758922 Small Alligator-Clip Adapter 300V

Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.

701954 Large Alligator Clip (dolphin type)

701954 Large Alligator Clip (dolphin type)

Set contains one black and one red clip.
1000 Vrms-CAT II.

701902/701903 Safety BNC to BNC Cable 1m/2m

701902/701903 Safety BNC to BNC Cable 1m/2m

701902: 1000 Vtms-CAT II (BNC-BNC), 1 m
701903: 1000 Vrms-CAT II (BNC-BNC), 2 m

366926 BNC to Alligator 1m Cable, 1:1

366926 BNC to Alligator 1m Cable, 1:1

A 1 m long BNC-alligator clip cable.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for DL750/DL750P, SL1000 & SL1400

366961 Banana to Alligator 1.2m Cable, 1:1

366961 Banana to Alligator 1.2m Cable, 1:1

A subassembly of 1.2 m long test leads with alligator-clip adapters.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for SL1000 & SL1400.

366924 BNC to BNC 1m Cable

366924 BNC to BNC 1m Cable

BNC-BNC 1m. For connection to simultaneously measurement with 2 units, or for input external trigger signal. 

366925 BNC to BNC 2m Cable

366925 BNC to BNC 2m Cable

BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

366921 BNC to Banana-Jack (Female) Adapter 42V

366921 BNC to Banana-Jack (Female) Adapter 42V

BNC-Banana-jack (female) adapter. Use for circuits having voltage levels no greater than 42 V.

366922 BNC to Banana (Male) Adapter

366922 BNC to Banana (Male) Adapter

Banana-plug (male)-BNC adapter. Use for circuits having voltage levels no greater than 42 V.

366923 BNC to T Adapter

366923 BNC to T Adapter

T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V.

751512 Banana (Male) to Binding Post Adapter

751512 Banana (Male) to Binding Post Adapter

Safety-terminal-binding-post adapter. Use for circuits having voltage levels no greater than 42 V.

701969 Rack mount kit for DLM4000

701969 Rack mount kit for DLM4000

Rack mount kit for DLM4000 series.
EIA/JIS sandard compliant.

B9850NX Legacy DL/DLM Printer Paper

B9850NX Legacy DL/DLM Printer Paper

Quality paper for the DLM6000/DL9700/DL9500/DL1700(E)/DL1600/DL1500 and DL7400

B9988AE Printer paper

B9988AE Printer paper

Quality paper for the DLM2000/DLM4000/DL850/DL6000/DL9000 and DL750

701966 Printer roll paper for DL750P and SL1400

701966 Printer roll paper for DL750P and SL1400

Quality paper for the DL750P and the SL1400.
Paper width: 210 mm (A4 size)
Paper length: 20 m
Order Qty: 6 (1set)

701957/701958 D-Sub Bridge Heads 120Ω/350Ω

701957/701958 D-Sub Bridge Heads 120Ω/350Ω

701957 DSUB Bridge Head with Shunt calibration
Bridge resistance:  120Ω , 5m DSUB cable included

701958 DSUB Bridge Head with Shunt calibration
Bridge resistance:  350Ω , 5m DSUB cable included

A1002JC NDIS Connector for 701270

A1002JC NDIS Connector for 701270

An NDIS connector for direct connection to a strain module.

700940 MIL-C-26482 to NDIS conversion cable

700940 MIL-C-26482 to NDIS conversion cable

A 1.5 m long connector-to-connector adapter cable complying with NDIS-MIL C26482. Used to connect a MIL-standard cable to the strain module

701955/701956 NDIS bridge heads

701955/701956 NDIS bridge heads

701955 NDIS Bridge Head, Bridge resistance: 120Ω , 5m NDIS cable included
701956 NDIS Bridge Head, Bridge resistance: 350Ω , 5m NDIS cable included

701915 Active Probe Clip Accessories Kit

701915 Active Probe Clip Accessories Kit

This attachment set can be used with PBA2500 and PBD2000.

701948 Extension Clip Accessories

701948 Extension Clip Accessories

Connected to the 700929, 701947
Maximum input voltage: 1,000V (DC + ACpeak)
Length: 0.26m/0.3m/0.4m
Applicable for DL750/DL750P, SL1000, SL1400

701906 Long Test Clip

701906 Long Test Clip

Set contains one black and one red clip
1000 Vrms-CAT II
2 pieces (red and black) in 1 set 
Connected to the 758933, 758917, or 701901
Length: 0.3m
Applicable for DL750/DL750P, SL1000, SL1400

366973 Go/No-Go Cable

366973 Go/No-Go Cable

This cable is used to connect an external device, however, do not use this cable for purposes other than DL750/1600/1700/1700E/7400 GO/NO-GO judgement.

701975 50 Ω DC block for 701974

701975 50 Ω DC block for 701974

This DC block can be used to remove the DC component from an incoming signal. Use this block if you want to remove bias voltage from reaching the PBL5000 probe.

700976 50 Ω Terminator

700976 50 Ω Terminator

Used to connect an oscilloscope having a 1M-ohm input to a probe with a 50-ohm output. It is required when using the 701920 and 701922 probes with the DL1600 series.

701971 DC Power Cable, Alligator Clip Type for DL850EV

701971 DC Power Cable, Alligator Clip Type for DL850EV

For the DC power supply model (/DC). Allgator clip type.

701970 DC Power Cable, Cigarette Lighter Type for DL850EV

701970 DC Power Cable, Cigarette Lighter Type for DL850EV

For the DC power supply model (/DC). Cigarette lighter plug type.

A1105JC DC power supply connector

A1105JC DC power supply connector

For the DC power supply model (-DC).

701959 Safety mini clip (hook type)

701959 Safety mini clip (hook type)

Set contains one black and one red clip. 1000 Vrms-CAT II.

B9852CR Mini Clip Passive Probe Tip

B9852CR Mini Clip Passive Probe Tip

A clip set designed for the 700988, 700960 and 701940 probes.

B9852ES Logic Probe IC Pin Clips

B9852ES Logic Probe IC Pin Clips

Attached to the tips of logic probe (701988 or 701989) or mini-clips (B9852CR), the IC clips can be used to clip contiguous 0.5-mm pitch terminals. A total of 10 clips are included.

701936 Deskew correction signal source

701936 Deskew correction signal source

Improve switching-loss measurements by eliminating skew.  The 701936 Deskew Correction Signal Source accommodates both clamp-on current probes and through-type ‘CT' Current Transformers.

701919 Probe Stand

701919 Probe Stand

Using a probe stand with a flexible arm and heavy base to hold and stabilize probes can simplify circuit board testing.

701913 Active Probe 2.5 GHz

701913 Active Probe 2.5 GHz

Use this 10:1 active probe with the DL6154, DL9240 series to realize system measurements up to 1.5 GHz BW.


700986 Logic Probe

700986 Logic Probe

8-bit, non-isolated, response speed: 1µs, threshold level approx 1.4V
Two measurement leads (B9879PX and B9879KX) included.

B9852HF Basic accessories set for the 701941 probe

B9852HF Basic accessories set for the 701941 probe

The B9852HF contains the following eleven(11) kinds of accessories: Insulation cap, IC cap, BNC adapter, Rigid tip, Spring tip (Ø: 0.80 mm), Spring tip (Ø: 0.38 mm), Ground spring, Adjustment tool, Pincher tip, Standard ground lead, Color coding rings. PBL5000.

B9946EB Soft case for the DL750

B9946EB Soft case for the DL750

Convenient and practical for storing accessories (probes, etc). It can be attached to the DL750’s front panel protective cover.

B9969ET Soft case for the DL7400 series

B9969ET Soft case for the DL7400 series

Ideal for storing accessories (probes, etc).

B9852MJ Power Cable for Differential Probes

B9852MJ Power Cable for Differential Probes

The B9852MJ cable supplies power to the 700924, 700925 and 701921 differential probes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)

* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or 9VDC"at the probe input power connector. 

All Products Guide
All Products Guide
PDF (26.47 MB)
CALL TOLL-FREE AT
1-800-888-6400
(8:00 TO 17:00 EASTERN)
y-Link


live chat service provider