DL850E/DL850EV ScopeCorder
The most feature-rich ScopeCorder, the DL850E combines a mixed signal oscilloscope and portable data acquisition recorder into a modular platform designed to capture both high-speed transients and low speed trends.
Combining signal conditioning, signal processing, and large recording memory, the DL850E is ready to be configured to meet your application demands. With its menu-driven user interface, advanced features are easily accessible, so you can gain insights and solve problems faster.
As the premier instrument in Yokogawa’s ScopeCorder family, the DL850E offers:
Most processing options
- 29 waveform parameter measurements
- Optional real-time math
- Optional power math
Highest channel count
- 8 input module slots
- Up to 128 channels
- Up to 100 MS/s sampling rate
- Up to 16-bit analog resolution
Deepest memory
- Up to 2 gigapoints waveform memory
- Optional internal HDD
- Optional external eSATA port for external drives
- Maximum 200 days recording time
Flexible and Swappable Input Modules With Built-in Signal Conditioning
Flexible and Swappable Input Modules With Built-in Signal ConditioningChoose from 20 types of input modules and install up to 8 in the DL850E ScopeCorder at a time to capture up to 128 channels. Input types include:
- Voltage & Currents
- Sensor Outputs
- Temperature, Vibration/Acceleration, Strain, Frequency
- Logic Signals & CAN / CAN FD / LIN and SENT
Eliminate Post Processing
Optional Real-Time Math and Power Math Processing
Available real-time digital signal processors calculate math functions or electrical power parameters. Results are plotted on the screen in real-time and can be measured with cursors, captured with triggers, and saved to disk, making the DL850E a productive tool for motors and drives and other time-based power engineering.
GiGAZoom Engine II
Zoom into two billion samples in just the blink of an eye. A dedicated zoom processor can operate two zoom windows with zero delay.
Cursor Measurement
Available cursors are horizontal, vertical, marker, degree or combined horizontal & vertical.
Automated Parameter Measurement
Measure up to 29 different waveform parameters in different time conditions, including:
- Entire waveform
- Per cycle
- Between cursors
- Cycle statistics
- History statistics
Never Miss a Data Point
Capture data for up to 200 days using up to 2Gpoint memory and optional hard disk recording. The History Memory function saves previous trigger data for later search and analysis.
The dual capture function is ideal for long-term testing. Capture the important transient events at a high sample rate while recording steady-state data at a low sample rate. The DL850E automatically switches to a high sampling rate when the trigger condition is met.
Time Synchronization
Correlate data with important events using the optional GPS and IRIG timing functions. The DL850E internal clock and sample clock can be aligned to synchronize multiple systems in remote locations. Merge data sets using XViewer PC software for easier analysis.
Real-Time Measurement of Electrical Power - /G5 option
Get results faster with real-time signal processing for electrical power parameters. Trend calculations such as active power, power factor, integrated power and harmonics, using a dedicated Digital Signal Processor (DSP) that is able to calculate and display up to 126-types of electrical power related parameters in real-time. This enables the user to display raw waveform signals such as voltages and currents along with power calculated parameters and even the capability to trigger on all of them. Data updating rate up to 100kS/s. Trend waveforms of each order of harmonics, bar-graphs and vector displays can be displayed. Both RMS and Power analysis modes are available. Besides the powerful power calculations, the /G5 option also contains all the functionality of the /G3 real-time math option.
Gapless Real-Time Calculations
Taking advantage of the real-time calculations of power parameters allows engineers to create a high-channel count, time series data set of mixed signals including sensors, automotive serial bus data, and accessory analog and discrete inputs. This is ideal for such scenarios as:
- Long-term monitoring or validation of power system performance over hours or days of testing
- Fast transient evaluation while operating test vectors such as start-up, emergency shutdown, or vehicle simulated drive conditions
- Using enhanced triggers to evaluate power parameters and trap unusual behavior for continuous improvement
DL850EV Vehicle Edition
The ScopeCorder Vehicle Edition is designed for engineers working in the automotive and railway industry, providing a thorough insight into the dynamic behavior of the electromechanical system. This integrated approach results in considerable time saving compared to using multiple separate instruments.
Download the eBook to learn more.
CAN/CAN FD or LIN/SENT bus Monitoring
Use a ScopeCorder to decode the CAN/CAN FD or LIN bus or SENT signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors
Powerful Real-Time Calculations and Analysis Functions
As a standard feature, the ScopeCorder is equipped with a set of basic arithmetic functions such as addition, subtraction, division, multiplication, Fast Fourier transformation and more. In addition to standard math, advanced real-time analysis functions are available.
Real-Time Mathematical Computations and Digital Filtering - /G3 option
Real-Time Mathematical Computations and Digital Filtering - /G3 optionArmed with a dedicated digital signal processor the ScopeCorder can perform mathematical calculations such as arithmetic operators with coefficients, integrals differentials, and higher order equations on acquired measurement data. The results of these calculations are displayed during waveform capture in real-time. In addition to mathematical operators, steep digital filters can also be selected to isolate or trigger on the amplitude of certain frequency components.
Measuring the electrical angle corresponding to the mechanical angle is important for understanding motor characteristics. The Electrical Angle operation enables the extraction of the fundamental component of current by Discrete Fourier Transform, then the calculation of the phase difference between it and the rotary angle in real-time. A trend of the phase difference can also be displayed in real-time.
User defined computations - /G2 option
With user defined computations it is possible to create equations using a combination of differentials and integrals, digital filters, and a wealth of other functions. Moreover, it is possible to perform various types of FFT analysis using two FFT windows. In applications such as vibration and shock tests, you can easily evaluate abnormal vibrations while simultaneously measuring other signals.
Application Example | With FFT
Flexible operation and a variety of connection interfaces
A ScopeCorder has been designed to grant users access to functionality in the field quickly and easily using the front panel menu buttons. For users that prefer workbench operation it is possible to connect a USB mouse or keyboard.
Front View
Side View
Software Control
Analyze measurement data using the ScopeCorder itself or on the PC using the Yokogawa Xviewer software or select any of the drivers below. Please download "free software" and "Trial Versions" in the software tab above.
Available Software
Xviewer / XviewerLITE
Xviewer lets you transfer files between the DL850E series and a PC and allows you control your ScopeCorder remotely using your PC.
XWirepuller
XWirepuller enables Yokogawa’s digital oscilloscopes and ScopeCorders to be controlled from your PC via the Ethernet, USB, or GP-IB interface. When the software program starts, the front panel image of the connected instrument appears on your PC. You can control the instrument from your PC with the mouse to simulate operations using the front panel keys of the instrument.
LabVIEW Driver
National Instruments LabVIEW Driver for DL850 is available on National Instruments web site.
WDF File Access Library
WDF File Access Library is the special library to access waveform data files saved in WDF format.
* VisualStudio 2008 SP1 is required to use this software.
MATLAB WDF Access Toolbox
MATLAB WDF Access Toolbox enables the access to waveform data files saved in WDF format on MATLAB.
To control the instruments on MATLAB, please use Instrument Control Toolbox provided by MathWorks.
Improving Accelerometer Measurement Reliability in Data Acquisition Systems
The ScopeCorder DL850E was designed with built-in antialiasing filters to accept inputs from wide bandwidth, high voltage accelerometers, providing low impedance inputs for excellent noise eliminating characteristics.
Finding Absolute Position of Electric Motors with Yokogawa ScopeCorders
Properly orienting the north pole of the rotor is critical to the goals of Field Oriented Control and allows the results of the Park and Clarke transformations to be more accurate. The DL850 with Real-Time Math eliminates programming and post-processing, serving as an essential tool for the motor drive designer or drive system integrator.
700924 Differential Probe 1400V / 100 MHz
Differential probe powered by Yokogawa Digital Oscilloscopes, ScopeCorders, external power supply or internal battery.
700929 Isolated Passive Probe 1000V / 100 MHz
Passive Probe, 1000Vp CAT II, 100MHz, 10:1, 10MΩ, 1.5m, Isolated Probe, Iso-Probe
Please see also 701947 & accessories.
700986 Logic Probe
8-bit, non-isolated, response speed: 1µs, threshold level approx 1.4V
Two measurement leads (B9879PX and B9879KX) included.
700987 Logic Probe - Isolated Inputs
8-bit, isolated, response speed: 1ms or less (DC), 20ms or less (AC), treshold level 6VDC or 50VAC.
To be used with measurement lead 758917 and 758922, 758929 or 701954 adapter leads.
701917 Current Probe 50 MHz / 5 ARMS
Frequency bandwidth: DC to 50 MHz
Maximum continuous input range: 5 Arms
Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.
701918 Current Probe 120 MHz / 5 ARMS
Frequency bandwidth: DC to 120 MHz
Maximum continuous input range: 5 Arms
Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.
701926 Differential Probe 7000V / 50 MHz
High Voltage Differential probe powered by Yokogawa Digital Oscilloscopes, ScopeCorders, external power supply or internal battery.
701930 Current Probe 10 MHz / 150 ARMS
Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.
701931 Current Probe 2 MHz / 500 ARMS
Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.
701933 Current Probe 50 MHz / 30 ARMS
Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.
701934 External Probe Power Supply
A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.
701940 Passive Probe 600V / 10 MHz
Passive Probe, 600Vp, 6MHz/10MHz, 1:1, 10:1, 1MΩ/10MΩ, 1.5m '600V Non-Isolated'
701947 Isolated Probe 1000V / 200 MHz
Passive Probe, 3540Vp-CAT I, 1000Vp-CAT II, 200MHz, 100:1, 100MΩ, 1.5m, 'Isolated Probe' 'Iso-Probe'
702902 Isolated Passive Probe 1000V / 60 MHz
Passive Probe, 1000V(DC+ACpeak) CAT II, 60MHz, 10:1, 10MΩ, 2.5m
Wide operating temperature range(-40 to 85°C)
For isolated BNC input modules for ScopeCoder series
702911-702912 Logic Probe
8-bit, non-isolated, response speed: 3µs or less, treshold level approx 1.4V
702911: 1 meter cable, 702912: 3 meter cable
720930 Clamp on Probe
The 720930 and 720931 passive clamp-on current probes allow current waveform readings directly via analog input modules on ScopeCorders including the DL350 and DL850 using isolated BNC connections.
- AC 50 A
- 40 Hz to 3.5 kHz Bandwidth
720931 Clamp on Probe
The 720931 passive clamp-on current probe anables current waveform readings directly via analog input modules on ScopeCorders including the DL350 and DL850 using isolated BNC connections.
- AC 200 A
- 40 Hz to 3.5 kHz Bandwidth
B9852MJ Power Cable for Differential Probes
The B9852MJ cable supplies power to the 700924, 700925 and 701921 differential probes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)
* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or 9VDC"at the probe input power connector.
366924 BNC to BNC 1m Cable
BNC-BNC 1m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.
366925 BNC to BNC 2m Cable
BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.
366926 BNC to Alligator 1m Cable, 1:1
A 1 m long BNC-alligator clip cable.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for DL750/DL750P, SL1000 & SL1400
366961 Banana to Alligator 1.2m Cable, 1:1
A subassembly of 1.2 m long test leads with alligator-clip adapters.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for SL1000 & SL1400.
701902/701903 Safety BNC to BNC Cable 1m/2m
701902: 1000 Vtms-CAT II (BNC-BNC), 1 m
701903: 1000 Vrms-CAT II (BNC-BNC), 2 m
701901 BNC to Safety Banana 1.8m Cable, 1:1
1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.
701970 DC Power Cable, Cigarette Lighter Type for DL850EV
For the DC power supply model (/DC). Cigarette lighter plug type.
701971 DC Power Cable, Alligator Clip Type for DL850EV
For the DC power supply model (/DC). Allgator clip type.
366923 BNC to T Adapter
T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V.
701906 Long Test Clip
Set contains one black and one red clip
1000 Vrms-CAT II
2 pieces (red and black) in 1 set
Connected to the 758933, 758917, or 701901
Length: 0.3m
Applicable for DL750/DL750P, SL1000, SL1400
701919 Probe Stand
Using a probe stand with a flexible arm and heavy base to hold and stabilize probes can simplify circuit board testing.
701948 Extension Clip Accessories
Connected to the 700929, 701947
Maximum input voltage: 1,000V (DC + ACpeak)
Length: 0.26m/0.3m/0.4m
Applicable for DL750/DL750P, SL1000, SL1400
701954 Large Alligator Clip (dolphin type)
Set contains one black and one red clip.
1000 Vrms-CAT II.
701955/701956 NDIS Bridge Heads 120Ω/350Ω
701955 NDIS Bridge Head, Bridge resistance: 120Ω , 5m NDIS cable included
701956 NDIS Bridge Head, Bridge resistance: 350Ω , 5m NDIS cable included
701957/701958 D-Sub Bridge Heads 120Ω/350Ω
701957 DSUB Bridge Head with Shunt calibration
Bridge resistance: 120Ω , 5m DSUB cable included
701958 DSUB Bridge Head with Shunt calibration
Bridge resistance: 350Ω , 5m DSUB cable included
701963 Soft carrying case for DL850E Series
Three pockets are provided for storing accessories and the user’s manual.
751512 Banana (Male) to Binding Post Adapter
Safety-terminal-binding-post adapter. Use for circuits having voltage levels no greater than 42 V.
758917 DMM Measurement Lead Set
A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.
758921 Fork terminal adapter
Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip. 1000 Vrms-CAT II.
758922 Small Alligator-Clip Adapter 300V
Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.
758924 BNC to Banana Conversion Adapter
For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.
758929 Large Alligator Clip Adapter 1000V
Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.
758931 Screw-Fastened Safety Voltage Terminal Adapter Set
Screw-fastened adapters. Two adapters in a set. 1.5 mm Allen Wrench.
758933 Measurement lead
2 pieces (red and black) in 1 set
length: 1.00 m
Used in combination with the 701959, 758921, 758922, or 758929
Rating: 1000 V CAT III/19 A
There are several factors for a user to consider when using an IEPE accelerometer, particularly when used with newly available integrated signal conditioner/data acquisition systems. Correctly managing these factors will help the user avoid erroneous data from their IEPE accelerometer and ensure the quality of the measurement data is at the level they expect and require.
With the increased demand in electric-hybrid vehicles, the electromechanical designs of in-vehicle systems are becoming more sophisticated and there has been a demand shift towards high efficiency brushless direct current motor (BLDC) implementation. Think of motorized seat adjustment, electric window, power steering, HVAC fans, pumps, etc. In many of these systems various types of motors are used as actuators; more specifically, 3-phase BLDC motors are gaining popularity as they provide these important advantages:
- Improved speed vs torque characteristics
- High dynamic response
- High efficiency
- Extended speed ranges
- Long operation life
How to use built-in calculations to analyze motor rotor position and find the relative angle between the rotor and sensors such as encoders or resolvers.
Construction and verification of SENT communication system
How can I capture data from motion sensors synchronized with other analog data? The Yokogawa ScopeCorder series of instruments feature input modules and functions to make this possible.
Battery Voltage Fluctuation During ABS Action
Testing actuation of a side impact airbag to measure the optimal timing.
Evaluation of high efficiency motors in large air heaters
Evaluating and designing the Electric Power Steering (EPS)
Testing Engine Valve Spring Strength
Using the OR trigger and Dual Capture, it is easy to trap and record failure conditions on electrical harnessses (wiring interconnects) over a long duration test.
The Yokogawa DL850E is a waveform measuring and recording instrument with eight slots for signal conditioning and data acquisition modules. In addition to high-speed signal inputs up to 100 MHz sampling rate, the DL850E has features for real-time signal processing that provide advantages to scientists and engineers trying to observe complex systems.
This comprehensive training module covers the following topics:
- Introduction & Product Familiarization
- Basics Features
- Advanced Features
- Step-by-Step Video Demonstrations of Features
As a one of the largest motorcycle manufacturers, Triumph confirms every bike is precision-engineered to deliver a complete riding experience. To ensure higher performance and efficiency of the motorcycle powertrain, Triumph test their engines under rigorous conditions, measuring and analyzing a vast array of parameters under varying conditions, from sensors configured and positioned all around a bike.
Brochures
- DL850E/DL850EV ScopeCorder (5.1 MB)
- ScopeCorder DL850E/DL850EV Introduction for Firmware Ver. 3.21 (750 KB)
- Plug-in modules specifications ScopeCorder series DL850E/DL850EV/DL350/SL1000 (3.8 MB)
Instruction Manuals
- DL850E/DL850EV ScopeCorder Features Guide (13.9 MB)
- DL850E/DL850EV ScopeCorder User's Manual (8.7 MB)
- DL850E/DL850EV ScopeCorder Getting Started Guide (13.6 MB)
- DL850E/DL850EV ScopeCorder Communication Interface User's Manual (4.2 MB)
- DL850E/DL850EV ScopeCorder Real Time Math (/G3)/Power Math (/G5) User's Manual (4.8 MB)
- DL850E/DL850EV Acquisition Software User's Manual (4.0 MB)
- Precaution Concerning the Modules (121 KB)
- DL850E/DL850EV FreeRun Application Programming Interface User's Manual (404 KB)
- Model DL850E ScopeCorder Model DL850EV ScopeCorder Vehicle Edition Radio Equipment Directive(RED) (149 KB)
Specifications
- Bulletin DL850E-00 (EU - English) (2.7 MB)
- Bulletin DL850E-00 (German) (2.7 MB)
- Bulletin DL850E-00 (Spanish) (2.6 MB)
- Bulletin DL850E-00 (Italian) (2.6 MB)
- Bulletin DL850E-00 (French) (2.7 MB)
Software
- Xviewer 701992 / XviewerLITE
- Xwirepuller
- WDF File Access Library
- MATLAB WDF Access Toolbox
- Symbol Editor
- Binary Data File Converter
- DL-Term
- Yokogawa WDF DataPlugin ( NATIONAL INSTRUMENTS Web Page )
- DL850E/DL850EV Acquisition Software
- GO-NOGO Zone Editor
- DL850E/DL850EV Free-Run Library
- TMCTL
- YKMUSB USB Driver
- LabVIEW drivers for DL850 series ( NATIONAL INSTRUMENTS Web Page )
Firmware
How-tos
In this video, Dami Ashebu, an Application Engineer with Yokogawa Test and Measurement discusses how a DL850EV data acquisition system can be used to gather various analog and serial bus data for systems validation and reverse engineering in the automotive industry.
In this video we demonstrate the automotive bus decoding features of the DL850EV ScopeCorder.
