Cables

Yokogawa Accessories- Cables

Probe cables, lead cords, output, extension, and connection cables, alligator clips, BNC, USB, and more.

What is a probe cable?

Cable probes help take measurements and detect changes in gases and liquids

  • Set of 0.8m long red and black multimeter test leads
  • Used in combination with a pair of optional 758922 or 758929 alligator-clip adapters
  • 1000 Vrms, 32 Arms CAT II

Applicable for DL850 and WT300 series.

2 pieces (red and black) in 1 set.
Length: 1.5 m, Rating: 80 A

Output cable, length approx.1 m

Output cable for screw terminal, length approx.1 m

For the DC power supply model (/DC). Cigarette lighter plug type.

  • 701971 Alligator clip type for DL850EV ScopeCorder
  • For the DC power supply model (/DC).
  • 701901 BNC to Safety Banana 1.8m Cable, 1:1
  • 1000 Vrms-CAT II, 1.8 m long
  • Safety BNC(male) to safety banana(female)
  • 701959, 701954, 758921, 758922, 758929
  • 701902/701903 Safety BNC to BNC Cable for oscilloscope
  • Safe, high-voltage measurements with DL350, DL950, and SL1000 isolated input modules 
  • 701902: 1000 Vtms-CAT II (BNC-BNC), 1 m
  • 701903: 1000 Vrms-CAT II (BNC-BNC), 2 m
  • 366924 BNC to BNC cable for oscilloscope 
  • 1m BNC wire
  • Simultaneous measurement with 2 units
  • Input external trigger signal
  • 1 m long BNC to alligator clip cable
  • Only for circuits with voltage levels no greater than 42 V
  • Applicable for DL750/DL750P, SL1000 & SL1400

This cable is used to connect an external device, however, do not use this cable for purposes other than DL750/1600/1700/1700E/7400 GO/NO-GO judgement.

A subassembly of 1.2 m long test leads with alligator-clip adapters.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for SL1000 & SL1400.

BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

1:1 Safety Adapter Lead for the 720268 High Voltage Input Module

Rated supply voltage 10 to 30 VDC (at the DL350 connector end).
Maximum power consumption 45 W.
Withstand voltage (when the power is turned off or charging is stopped).
0.6 Wtyp.
DC power cable Cigarette lighter plug Type, length: 2.5 m.

2 voltage output cables (red and black). 1 m. Rating 1500 V

Dedicated Cables for WT1800E /PD option.

Direct Current Input Cable (with Burden Resistor 2.7 Ohm) for WT1800E /PD2 option.

Direct Current Input Cable (without Burden Resistor) for WT1800E /PD2 option

For connection the external input of the WT3000 to the current sensor.
Length: 50cm

2 pieces (red and black) in 1 set
length: 1.00 m
Used in combination with the 701959, 758921, 758922, or 758929
Rating: 1000 V CAT III/19 A

Alligator clip, CAT I, for controlsignal only (under 70 V)One set of 1 red and 1 black cablesLength: Approx. 1.7m

Alligator Clip Cable (Red x 3pcs, Black x 1pce 1 set/ 1.7m)

For use with the CA320, Alligator Clip Cable (Red Black 1 set/ 1.7m)

Extension cable for Clamp-on Probe

for 96030, 96033, 96036

  • 99014 Alligator Clip Leads
  • 1000 V CAT III, 600 V CAT IV Red Black 1 set

For DL850/E series, PX8000

For SL1000, Cable length: 1 m

For SL1000, Cable length: 3 m

Total length: 2 m
USB2.0 Hi-Speed

Connecting cable for 701953 (3 m)

One set of 1 red and 2 black cables
Length: Approx. 1.7 m

One set of 1 red and 1 black cables
Length: Approx. 1.0 m

  • 98073 Test Leads - Electrical Test Meter Leads | Yokogawa
  • 1000 V CAT III 
  • 600 V CAT IV
  • Red/Black, 1 set

USB Cable (Type-C to Type-C)

1m PM100 connection cable

1 m in length, USB type A to USB type Micro-B.

Looking for more information on our people, technology and solutions?


Contact Us

Precision Making

Top