Cables

The B9852MJ cable supplies power to the 700924, 700925 and 701921 differential probes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)
* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or 9VDC"at the probe input power connector. 

A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.

Applicable for DL850 and WT300 series.

2 pieces (red and black) in 1 set.
Length: 1.5 m, Rating: 80 A

Output cable, length approx.1 m

Output cable for screw terminal, length approx.1 m

A 1.5 m long connector-to-connector adapter cable complying with NDIS-MIL C26482. Used to connect a MIL-standard cable to the strain module

For the DC power supply model (/DC). Cigarette lighter plug type.

For the DC power supply model (/DC). Allgator clip type.

1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.

701902: 1000 Vtms-CAT II (BNC-BNC), 1 m
701903: 1000 Vrms-CAT II (BNC-BNC), 2 m

BNC-BNC 1m. For connection to simultaneously measurement with 2 units, or for input external trigger signal. 

A 1 m long BNC-alligator clip cable.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for DL750/DL750P, SL1000 & SL1400

This cable is used to connect an external device, however, do not use this cable for purposes other than DL750/1600/1700/1700E/7400 GO/NO-GO judgement.

A subassembly of 1.2 m long test leads with alligator-clip adapters.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for SL1000 & SL1400.

BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

1:1 Safety Adapter Lead for the 720268 High Voltage Input Module

Rated supply voltage 10 to 30 VDC (at the DL350 connector end).
Maximum power consumption 45 W.
Withstand voltage (when the power is turned off or charging is stopped).
0.6 Wtyp.
DC power cable Cigarette lighter plug Type, length: 2.5 m.

2 voltage output cables (red and black). 1 m. Rating 1500 V

Dedicated Cables for WT1800E /PD option.

Direct Current Input Cable (with Burden Resistor 2.7 Ohm) for WT1800E /PD2 option.

Direct Current Input Cable (without Burden Resistor) for WT1800E /PD2 option

For connection the external input of the WT3000 to the current sensor.
Length: 50cm

2 pieces (red and black) in 1 set
length: 1.00 m
Used in combination with the 701959, 758921, 758922, or 758929
Rating: 1000 V CAT III/19 A

Alligator clip, CAT I, for controlsignal only (under 70 V)One set of 1 red and 1 black cablesLength: Approx. 1.7m

For use with the CA330, Alligator Clip Cable (Red x 3pcs, Black x 1pce 1 set/ 1.7m)

For use with the CA320, Alligator Clip Cable (Red Black 1 set/ 1.7m)

Extension cable for Clamp-on Probe

for 96030, 96033, 96036

1000 V CAT III, 600 V CAT IV Red Black 1 set

For DL850/E series, PX8000

For SL1000, Cable length: 1 m

For SL1000, Cable length: 3 m

Total length: 2 m
USB2.0 Hi-Speed

Connecting cable for 701953 (3 m)

One set of 1 red and 2 black cables
Length: Approx. 1.7 m

One set of 1 red and 1 black cables
Length: Approx. 1.0 m

1000 V CAT III, 600 V CAT IV Red Black 1 set

Looking for more information on our people, technology and solutions?


Contact Us
Top