What is the Averaging Method Function on the AQ7270 OTDR?

On the AQ7270 OTDR, there is an Averaging Method function with two measurement modes: High Speed or High Reflection.
 
High Speed
The high speed mode is used to measure all sections using a fixed attenuation setting. If the attenuation is not appropriate and a large reflection occurs, the corresponding section of the waveform may saturate.
 
High Reflection
The high reflection mode measures the waveform with variable attenuation settings. The optimal attenuation is set according to the backscattering light level for each section. This allows accurate measurements even where there are large reflections, such as those caused by an open end.

Related Products & Solutions

AQ7260 Optical Time Domain Reflectometer

Speed, ease-of-use, increased efficiency of optical network testing is exactly what the AQ7260 provides to simplify your application processes.

Optical Test Equipment

Yokogawa offers solutions to measure both traditional and cutting-edge optical components and systems, serving the increasing demand for high capacity fiber lines, and new component technologies.

Optical Time Domain Reflectometer

An optical time domain reflectometer (OTDR) is a precision instrument used to locate events or faults along a fiber link, typically within an optical communications network.

Top