Frequency bandwidth: DC to 100 MHz
Maximum continuous input range: 1400 Volts
Attenuation Ratios: 100:1 or 1000:1
Functions with Digital Oscilloscopes, ScopeCorders or other waveform measuring instruments.
Applicable for all Digital Oscilloscopes or ScopeCorders.
With increases in the speed of measured signals in recent years, it has become necessary to make floating measurements over a wide frequency band. The 700924 differential probe lets you make wide-band (100 MHz) differential input measurements by just connecting the probe to the input of a single-end input digital oscilloscope.
Oscilloscope input amplifiers are normally single-ended. They do not provide accurate measurements when used in combination with a 10:1 passive probe for measuring the gate-to-source voltage of a switching power supply, or potential difference with a common mode voltage in elements such as Insulated Gate Bipolar Transistors (IGBTs).
Furthermore, there is a risk that current will enter through the oscilloscope ground line and damage the oscilloscope.
|Input type||Balanced differential input|
|Frequency band||DC up to 100 MHz (-3 dB)|
|Input attenuation ratio||Switched between 1/100 and 1/1000|
|Input impedance||Approximately 4 MΩ, approximately 10 pF parallel|
|Gain accuracy||±2% (common mode voltage: 400 V or less)
±3% (common mode voltage: 1000 V or less)
|±350 V (DC + ACpeak) or 250 Vrms (1/100 range)
±1400 V (DC + ACpeak) or 1000 Vrms (1/1000 range)
|Maximum common mode
|±1400 V (DC + ACpeak) or 1000 Vrms (both 1/100 and 1/1000 ranges)|
|Maximum input voltage||±1400 V (DC + ACpeak) or 1000 Vrms (1/1000 range)|
|Common Mode Rejection Ratio (CMRR)||-80 dB (60 Hz), -50 dB (1 MHz)|
|Output voltage||±3.5 V|
|Output impedance||Used with 1 MΩ input impedance|
|Power supplies||Dry cells, four R6P (SUM-3); when using the AC/DC adapter, use an output voltage of 6 V/200 mA or greater/center plus|
|Dry cell life||Approximately 2 hours under continuous use|
|External dimensions (approximate)||207 mm x 83 mm x 38 mm¹|
|Total length||Approximately 1.5 meters|
|Weight||Approximately 800 grams (excluding dry cells)|
|Approved standards||EMC: EN55011: 1991 + A1: 1997 + A2: 1996
Safety: EN61010-1: 1993 + A2: 1995
¹: 38 mm is listed as the maximum value.
Note: Dry cells and AC/DC adapter not included.
|Differential probe||700924||DC to 100 MHz band|
Each 700924 differential probe comes standard with red and black pincher tips (one each).
Looking for more information on our people, technology and solutions?