Accessories

Modules

  • High-Speed 100 MS/s 12-Bit Isolation Module (2 channels) 
    IsoPRO technology enables 1kV isolated measurements in combination with 700929 or 701947 probe and is designed for inverter / IGBT related applications in mind. Using high speed optical fiber-based transmission, the module achieves high speed ADC clock and data isolation and provides the performance needed to develop high efficiency inverters, which employ high voltages, large currents, and ever increasing switching speeds.
    Applicable to DL350, DL850 series and SL1000.

  • The 720250 Voltage Module has a 10 MS/s sample rate, 12-bit resolution, 3 MHz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 800 V*2, 200 V*3, DC accuracy of ±0.5%, and high noise immunity.
    Applicable to DL350, DL850 series and SL1000.

  • High-Speed 1 MS/s 16-bit Isolation Module (4 ch) 
    High Noise Immunity  
    Suitable for testing and long term monitoring for power generators and multi-output power supplies. Provides dynamic analysis of multi-channel data recording applications. 
    Applicable to DL350 and DL850 series.

  • The 720268 High Voltage Module has a 1 MS/s sample rate, 16-bit resolution, 300 kHz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 1000V*9 *11, DC accuracy of ±0.25%, and AAF, RMS, and high noise immunity.
    Applicable to DL350, DL850 series and SL1000.

  • This is a multichannel voltage module capable of measuring 16 channels of DC voltage on a single unit.

    • Isolated (GND-terminal)
    • Non-Isolated (CH-CH) 
    • Maximum allowable voltage between sub-channel high inputs 42V (DC + AC Peak)
    Applicable to DL350 and DL850 series.
  • Universal Module (2 ch)
    Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel)
    Applicable to DL350, DL850 series, DL750 series and SL1000.

  • Universal Module (with Anti-Aliasing Filter, 2 ch)
    Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), with AAF
    Applicable to DL350, DL850 series, DL750 series and SL1000.

  • Temperature/high-precision voltage Module (2 ch)
    Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (1 mV), and low noise (±4 µVtyp)
    Applicable to DL350, DL850 series, DL750 series and SL1000.

  • The 720266 Module has a 125 S/s (Voltage) and 125 S/s (Temperature) sample rate. It has a 16-Bit (Voltage),
    0.1°C (Temperature) resolution, 15 Hz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 42V, DC accuracy of ±0.08% (Voltage), and thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (0.1 mV/div), and low noise (±4 µVtyp.).
    Applicable to DL350, DL850 series and SL1000.

  • 16 Channel Voltage or Temperature Input Module.
    To be used with 701953 Scanner Box.
    Applicable to DL350 and DL850 series.

  • Strain Module, type NDIS (2 channels) to be used in combination with 701955 or 701956 NDIS bridge head.
    Using the strain module and strain gauge the ScopeCorder can detect and display mechanical stress (strain). It works on the principle that the resistance value of a metal foil changes as it expands and contracts.
    Applicable to DL350, DL850 series, DL750 series and SL1000.

  • Strain Module with Shunt Calibration, type DSUB (2 channels) to be used in combination with 701957 or 701958 DSUB bridge head.
    Using the strain module and strain gauge the ScopeCorder can detect and display mechanical stress (strain). It works on the principle that the resistance value of a metal foil changes as it expands and contracts.
    Applicable to DL350, DL850 series, DL750 series and SL1000.

  • Acceleraton/Voltage Module with Anti-Aliasing Filter, (2 channels)
    Accepts direct input from a built-in amp type acceleration sensor to measure acceleration. Sensor supply current (voltage) OFF/4 mA ± 10% (approx. 22 VDC) Applicable acceleration sensor  type: Built-in amplifier type, Kistler Instruments Corp. : PiezotronTM, PCB, Piezotronics Inc. : ICPTM, Endevco Corp : IsotronTM.
    Applicable to DL350, DL850 series and SL1000.

  • The 720281 Frequency Module has a 1 MS/s sample rate, 16-bit resolution, bandwidth of resolution 625 ps, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 420 V*2, 42 V*3, DC accuracy of ±0.1% (Frequency), and measurement frequency of 0.01 Hz to 500 kHz. The measured parameters are frequency, rpm, period, duty, power supply frequency, distance, and speed.
    Applicable to DL350, DL850 series and SL1000.

  • Input logic signals can be displayed as waveforms at 10 MS/s sampling resolution. Each port can measure 8 bits, and 2 ports of input are available on each module. Thus, a single module can observe 16-bit logic signals. Compatible with 700986, 700987, 702911 and 702912 logic probe.
    Applicable to DL350 and DL850 series.

  • Use the CAN/LIN bus monitor module to decode the CAN or LIN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.
    Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

  • Use the CAN/CAN FD Monitor Module to decode the CAN/CAN FD-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors. Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

  • Use the SENT monitoring module to decode the SENT protocol signal and display information on physical quantities from SENT output sensors.
    Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

  • External scanner box for 720221 module.
    Voltage or temperature measurement (scanner method) Thermocouple (K, E, J, T, L, U, N, R, S, B, W, Au-Fe-chromel)

  • A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.

  • A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.

  • A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.

  • Sensor and voltage measurement module (up to three modules can be installed) Auxiliary (AUX) module

  • High-Speed 1 Ms/s 16-Bit Isolation Module (2 ch)
    High sensitivity range (10 mV), low noise (±100 µVtyp), and high noise immunity
    Applicable to DL850 series, DL750 series and SL1000.

  • High-Speed 10 MS/s 12-Bit non-isolation Module (2 ch)
    Non-Isolation version of model 720250
    Applicable to DL850 series, DL750 series and SL1000.

  • 760901 30A High Accuracy Element. Includes external sensor input.

  • 760902 5A High Accuracy Element. Includes external sensor input.

  • AQ2200-112 is a light source module with high output level stability performance.

  • High Stability reference laser light sources for DWDM channel measurements. The one or two channel modules are part of an integrated optical device testing solution for the AQ2200 series frame controller platform.

  • Ideal for measuring output power of transmission equipment and optical fiber amplifiers.

  • Increase your testing power and capability with the AQ2200-221 sensor module. Thirty two ports can be simlutaneously collectively measured using 16 units of AQ2200-221.

  • The AQ2200-232 and AQ2200-242 are high performance optical sensor head, and the AQ2200-202 is an interface module to connect the AQ2200-232/-242 with the AQ2200 series frame controllers.

  • A small, lightweight variable optical attenuator providing low insertion loss
    SM, GI50 and GI62.5 optical fiber models available.

  • With built-in optical power meter for monitoring power
    Compact and lightweight optical variable attenuator.
    SM, GI50 and GI62.5 optical fiber models available.

  • With built-in optical power meter for monitoring output power
    Compact and lightweight dual optical variable attenuator

  • Superior switching reproducibility
    Compact optical switches
    SM, GI50 and GI62.5 optical fiber models available.

  • Superior switching reproducibility
    Compact optical switches
    SM and GI50 optical fiber models available.

  • Superior switching reproducibility
    Compact optical switches
    SM, GI50 and GI62.5 optical fiber models available.

  • The AQ2200-642 reduces the complexity and cost of 10G optical transceiver testing by combining bus and power control features into the same mainframe that performs Signal Generation, BERT and Optical testing.

  • The AQ2200-651 Signal Generator module reduces the complexity and cost of 10G optical transceiver testing by combining Signal Generation functions into the same mainframe  that provides bus and power control while performing BERT and Optical testing

Looking for more information on our people, technology and solutions?


Contact Us
 
Top