Modules
Yokogawa Industrial Modules
- Isolation Modules
- Voltage modules
- Temperature Input Module
- Strain Input Modules
- Frequency Modules
- Logic Input Modules
- Auxillary Modules, and more
- 2-Channel Analog Input
- 200 MS/sec, 14-Bit
- 40 MHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 1000V / 200V
- 2-Channel Analog Input
- 100 MS/sec, 12-Bit
- 20 MHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 1000V / 200V
- 2-Channel Analog Input
- 10 MS/s, 12-Bit
- 3 MHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 600V / 200V
- 2-Channel Analog Input
- 1 MS/sec, 16-Bit
- 3 MHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 600V / 140V
- High Sensitivity Range (10 mV), Low Noise (±100 µVtyp)
1 MS/s 16-Bit Isolation Module (Offset Adjust)
- 2-Channel Analog Input
- 1 MS/sec, 16-Bit
- 300 kHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 600V / 140V
- High Sensitivity Range (1 mV/div), Low Noise (±100 µVtyp)
- Offset Adjustment
- 4-Channel Analog Input
- 1 MS/sec, 16-Bit
- 300 kHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 600V / 200V
- 4-Channel Analog Input
- 10 MS/sec, 16-Bit
- 3 MHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 600V / 200V
- 2-Channel Analog Input
- 10 MS/sec, 12-Bit
- 3 MHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 600V / 200V
- 2-Channel Analog Input
- 1 MS/sec, 16-Bit
- 300 kHz Bandwidth
- Max. Input Voltage: 1000V (Direct Input)
- 16-Channel
- Isolated (GND-Terminal), Non-Isolated (CH-CH)
- 10 kS/s on All Channels or 200 kS/s Single-Channel
- Max. Voltage Per Channel (DC + ACpeak): 42V
- 2-Channel (1 Voltage and 1 Current Sensor)
- 1 MS/sec, 16-Bit
- 300 kHz Bandwidth
- Max. Input Voltage (DC + ACpeak): 1000V (Voltage) / 10V (Current)
- Accuracy Guaranteed Range: DC, 0.1 Hz to 100 kHz
*To perform calculations for RMS values or power values with guaranteed accuracy, the /G05 or /MT1 option is required.
- 2-Channel
- Universal Module (with Anti-Aliasing Filter)
- 12 Thermocouple Types Supported
- 2-Channel
- 12 Thermocouple Types Supported
- High Sensitivity Range (1 mV) & Low Noise (±4 µVtyp)
- 2-Channel
- 16-Bit, 125 S/s (Voltage) & 125 S/s (Temperature) Sample Rate
- 16-Channel Voltage/Temperature Input Module
- Use with 701953 Scanner Box
- External scanner box for 720221 module
- Voltage or temperature measurement (scanner method)
- Thermocouple (K, E, J, T, L, U, N, R, S, B, W, Au-Fe-chromel)
- 2-Channel
- Strain Module with Shunt Calibration, Type DSUB
- Use with 701957 or 701958 DSUB Bridge Head
- 2-Channel
- Selectable Anti-Aliasing Filters
- Direct Accelerometer Excitation and Input
- 2-Channel, Isolated
- Trend and Trigger on Frequency, RPM, RPS, Period, Duty Cycle, Pulse Width, Pulse Integration, and Velocity
- 0.01 Hz to 500 kHz Measurement Frequency
- Two Ports, 8 Bits Each (16 Logic)
- Display Logic as Waveforms at 10 MS/s
- Compatible with 700986, 700987, 702911, 702912 Logic Probes
- Decode SENT (SAE-J2716) Protocol Signals
- Display Physical Quantities from Output Sensors
- Applicable to ScopeCorder Vehicle Edition
- Up to 60 Channels Per Port x2 Ports
- Decode CAN, CAN FD, and LIN
- Extract and Trend Serial IDs as Analog Waveforms
- Applicable to ScopeCorder Vehicle Edition
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
A Power Module consists of one Voltage Module- Model 760811, and one Current Module- 760812 or 760813.
Sensor and voltage measurement module (up to three modules can be installed) Auxiliary (AUX) module
- 1310, 1550, 1625 or 1650 nm
- Output level: ≥10 dBm
- Level stability: ±0.005 dB or less
- C-band or L-band
- 1 MHz step fine tuning
- Output level: ≥12.5dBm
- Large diameter detector
- 800 to 1700 nm, -90 to +15 dBm
- 400 to 1100 nm, -90 to +10 dBm
- Single mode model:
- 1200 to 1700 nm
- 0 to 60 dB
- Multi mode model:
- 800 to 1370 nm
- 0 to 45 dB
- Built-in optical power meter
- Single mode model:
- 1200 to 1700 nm
- 0 to 60 dB
- Multi mode model:
- 800 to 1370 nm
- 0 to 45 dB
- 1x4 or 1x8 configuration
- Single mode or Multi mode
- Low insertion loss: 1.0 dB
- Reproducibility: ±0.01 dB
- 1x16 configuration
- Single mode or Multi mode
- Low insertion loss: 1.0 dB
- Reproducibility: ±0.01 dB
- Dual 1x2 or Dual 2x2 configuration
- Single mode or Multi mode
- Low insertion loss: 1.0 dB
- Reproducibility: ±0.01 dB
- Supports 10G XFP, SFP+, XENPAK
- Power supply and power current monitoring
- I2C/MDIO interface
For DL950,SL2000 multi-unit connection
Current Sensor Element
Firmware version 3.01 or later of WT5000 main frame is required.
Top