AQ1300 Series 1G/10G Ethernet Multi Field Tester

Description

This firmware is intended to upgrade the AQ1300/AQ1301 to the latest version.

About firmware version

If you have a product with an older firmware version, please download the latest firmware from our download site and install it. The firmware download requires user registration.

How to check the current firmware version.

When powered on, the current firmware version is displayed on the bottom of the screen during initializing process.

*This firmware is compatible with AQ1300 MFT-10GbE and AQ1301 MFT-1GbE.
*Beside the updates described above, this firmware version contains further updates to make operations more comfortable and changes in specifications and display menu.
*Please upgrade the setup software to the latest version.

Revision History

Version	Content
R01.11.01.002	In-band remote control of ITU-T Y.1564 test function was improved. This firmware includes user-friendly updates other than listed above. This firmware is compatible with AQ1300 MFT-10GbE and AQ1301 MFT-1GbE.
R01.11.01.001	Added ITU-T Y.1564 function. A configuration test and the performance test is enabled. Up to eight services at the same time. This firmware includes user-friendly updates other than listed above. This firmware is compatible with AQ1300 MFT-10GbE and AQ1301 MFT-1GbE.
R01.10.01.003	Fixed issue where error frame might be sent when ARP/PING response is made during test frame transmission. This firmware includes user-friendly updates other than listed above. This firmware is compatible with AQ1300 MFT-10GbE and AQ1301 MFT-1GbE.

Previous version

Version	Content
R01.10.01.002	Fixed issue with RF output termination when AQ1300 detects link down while RF Auto Response is tuned on (Only on AQ1300). This firmware includes user-friendly updates, partial specification and display changes other than listed above. This firmware is compatible with AQ1300 MFT-10GbE and AQ1301 MFT-1GbE.
R01.10.01.001	Added E-OAM testing function. Supported Ethernet-OAM testing function defined in IEEE 802.1ag and ITU-TY.1731 Ethernet-OAM function of the network can be verified using LB (Loop Back), CC (Continuity Check), LT (Link Trace). Added support for AQ1300 Control Window AQ1300 Series Control Window is a tool to remotely control AQ1300 Series devices. This firmware is compatible with AQ1300 MFT-10GbE and AQ1301 MFT-1GbE.
R01.09.01.003	Added the Chinese language option This option supports Chinese and English. Please select the suffix code "-HC" when ordering. This firmware is compatible with AQ1300 MFT-10GbE and AQ1301 MFT-1GbE.
R01.09.01.002	For the product with firmware version R01.09.01.002 or older Added the Telnet remote control Added the VLAN Test function Added the Link Setting Acquisition function Added the Burst frame transmission at QoS test For the product with firmware version R01.05.01.001 or older PING test and PING response test support a PING frame with "Don't Fragment bit ON" For the product with firmware version R01.03.01.001 or older Improve key response

Download

Please read Software Agreement carefully before downloading.

Version	R01.12
Release Date	Apr 1, 2017
File Name	MFT_10GBE_Firmware_R1.11.01.002.zip	14.9 MB
Type	Firmware* Registration is required to download.

* Software Agreement

The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Test & Measurement Corporation.
Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
The contents of this software are subject to change without prior notice as a result of continuing improvements to the software's performance and functions.
Yokogawa bears no liability for any problems that may occur during download or installation of this software.
Use of the Yokogawa Web site is at the user's own risk.
Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.

Downloading of the software indicates acceptance of the software agreement.

Related Products & Solutions

AQ1300 Series 1G/10G Ethernet Multi Field Tester

Ethernet Service and Network tester with 10/100M, 1G and 10G Ports. A compact and lightweight handheld tester with functionalities optimized for the network path testing, commissioning and maintenance functions.