Is the RMS Method for Spectrum Width Calculation on the AQ6370C Optical Spectrum Analyzer FOTP-127 Compliant?

The AQ6370C Optical Spectrum Analyzer was developed in accordance with the IEC standard: WG4 (IEC 61280-1-3) Test procedures for general communication subsystems -Central wavelength and spectral width measurement. We cannot guarantee the RMS method for spectrum width calculation on the OSA is 100% compliant with the FOTP-127 standard since the equations are written slightly differently.
The K parameter in the RMS method algorithm was included to allow more flexibility in the computation method of spectrum width based on the original shape of the signal. For example, a value of 2.355 for K is recommended for the FWHM for a Gaussian shape response. The default value of K is 2.0. If you wish to use the exact same calculation method as the IEC method, please set the K parameter to 1 instead of 2. Please note that there is a typo in the AQ6370C User's Manual Appendix 2. The proper equation, with the K parameter included, can be found in the attached document.
This also applies to the following OSA models:
  • AQ6317
  • AQ6317B
  • AQ6317C
  • AQ6373
  • AQ6375
  • AQ6370
  • AQ6370B

Related Products & Solutions

AQ6370 Optical Spectrum Analyzer

  • Yokogawa AQ6370 Optical Spectrum Analyzer
  • Re-defining Optical Spectrum Measurement Excellence

AQ6370B Optical Spectrum Analyzer

High performance with a 20 picometer wavelength resolution supporting 25 GHz DWDM spacing and 40G/100G applications, this OSA also supports non-Telecom applications with a wavelength range from 600nm to 1700nm.

Long Wavelength Optical Spectrum Analyzer AQ6375

Unique LONG wavelength range of 1200 to 2400 nm makes this the world's first and only OSA specifically designed for use in advance applications such as Carbon Monoxide (CO), Carbon Dioxide (CO2) gas detection and LIDAR.

Visible Wavelength Optical Spectrum Analyzer AQ6373

Dedicated SHORT wavelength Range of 350nm to1200nm allows this model to accurately measure the visible spectrum of 380nm to 780nm for bio-sciences and beyond. It is also a popular tool for measuring 1064nm Nd:YAG, DPSS Laser sources.

Optical Spectrum Analyzer

  • Optical Spectrum Analyzer to measure and display power distribution of an optical source
  • Optical analyzer trace displays power in vertical scale and wavelength in horizontal scale

Optical Test Equipment

  • Yokogawa optical test equipment solutions to measure optical components/systems
  • Serves demand for high capacity fiber lines and new component technologies