701947 Isolated Probe 1000V / 200 MHz
|
Bandwidth |
: |
DC to 200 MHz |
|
Attenuation |
: |
100:1 |
|
Conector Type |
: |
Isolated BNC |
|
Input Resistance |
: |
100 MΩ |
|
Input Capacitance |
: |
7 pF |
|
Max. Input Voltage |
: |
Space between shield and ground. |
|
Probe length |
: |
1.5 m |
|
For ScopeCorder Isolated Modules |
||
Get valid waveform measurement results. Oscilloscopes and ScopeCorders make up half of a complete waveform measurement solution. Valid, quality results depend on the probe and how it interacts with the measuring instrument, and connects to the circuit under test.
Yokogawa Test&Measurement brings you a wide range of accessories for many different measurement applications, including high voltage differential probes, passive probes, non-isolated and isolated oscilloscope probes and ScopeCorder probes.
The 701947 isolated voltage probes enable safe high-voltage measurements when used together with DL750, DL750P, SL1400, and SL1000 isolated input modules.
- Bandwidth: DC to 200MHz (-3dB)
- Attenuation ratio: 100:1
- Connector Type: BNC
- Input Resistance: 100MΩ
- Input Capacitance: 7pF
- Compensation Range:
- Rise Time: 1.2ns
- Maximum input voltage, Space Between Shield and Earth:
- +/-1,000V (DC + ACpeak) CAT II
- +/-1,000V (DC + ACpeak) CAT I
- Maximum input voltage, Space Between Tip and Shield:
- +/-1,000V (DC + ACpeak) CAT II
- +/-3,540V (DC + ACpeak) CAT I
- Cable length: 1.5m
- Standard accessories included: One ach, B8073ZF Safety Plug-On Clip (high-side pincher), and B8074ZG Safety Clip Lead (low-side)
- Safety Rating (Probe Alone): EN61010-031:2002, CAT I and II Only.
Brochures
- Probes and accessories for Oscilloscopes (2.3 MB)
- 701947-PMK01E (111 KB)
