DL7100/DL7200 Digital Oscilloscope (DISCONTINUED)

• B9852MJ power probe extension cable
• Supplies power to 700924, 700925, and 701921 differential probes from the DL probe power connectors
• Required on DL unit
• Only works with newer probes

• B9852ES Logic Probe IC Pin Clips
• Attach to tips of logic probe (701988 or 701989) or mini-clips (B9852CR)
• Clip contiguous 0.5-mm pitch terminals
• 10 clips included

Ideal for storing accessories (probes, etc).

• 366924 BNC to BNC cable for oscilloscope 
• 1m BNC wire
• Simultaneous measurement with 2 units
• Input external trigger signal

BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

• Differential oscilloscope probe
• 100 MHz
• ±1400 V (DC + ACpeak) at 1000:1
• Power: Internal battery or probe power supply
• Works with Oscilloscopes, ScopeCorders

15 MHz, 100:1/10:1, Max. Differential Voltage: ±500 V (DC + ACpeak) or 350 Vrms at 100:1 attenuation, Probe Power: Internal battery or probe power supply Work with Oscilloscopes, ScopeCorders

• 700939 Active FET Probe
• 900 MHz Active FET Probe Circuit
• 10:1, ±10 V (DC + ACpeak) FET Input Active Probe
• 1.5 m

400 MHz, 10:1/1:1, 600 V (DC + ACpeak) or 424 Vrms CAT II, 1.5 m For DL1700, DL1700E, DL7200, DL7400 series

500 MHz, 10:1, Max. Differential Voltage: ±12 V (DC + ACpeak), Probe Power: probe power supply Work with 50 Ω input system oscilloscope

100 MHz, 100:1/10:1, Max. Differential Voltage: ±700 V (DC + ACpeak) at 100:1 attenuation, Probe Power: Internal battery or probe power supply

200 MHz, 10:1, Max. Differential Voltage: ±20 V (DC + ACpeak), Probe Power: probe power supply Work with 50 Ω input system oscilloscope

50 MHz, 1000:1/100:1, Max. Differential Voltage: 5000 Vrms/7000 Vpeak (1000:1), Probe Power: Internal battery or probe power supply B9852MJ power cable is bundled Work with Oscilloscopes, ScopeCorders

• 701930 Current Probe 10 MHz / 150 ARMS
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply

• 701931 Current Probe 2 MHz / 500 ARMS
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply

• 701932 Current Probe 100 MHz / 30 ARMS
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders, or external power supply

• 701933 50 by 30 current probe
• Powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply

• 701944 High Voltage Passive Probe 1000Vrms / 400 MHz
• For DL1700, DLM2000-6000, DL6000, DL9000, SB5000 series

• 3m High Voltage Probe (oscilloscope)
• DC to 250 MHz bandwidth 
• 100:1 attenuation 
• Max Input 1000 Vrms CAT II 4000 V transient over-voltage CAT O

• 701934 External Probe Power Supply
• Power supply for current probes, FET probes, and differential probes
• Supplies power for up to four probes, including large current probes

• 701919 oscilloscope probe stand
• Flexible arm, heavy base to hold and stabilize 8-13mm probes
• Can simplify circuit board testing

T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V.