701947 Isolated Probe 1000V / 200 MHz
|
Bandwidth |
: |
DC to 200 MHz |
|
Attenuation |
: |
100:1 |
|
Conector Type |
: |
Isolated BNC |
|
Input Resistance |
: |
100 MΩ |
|
Input Capacitance |
: |
7 pF |
|
Max. Input Voltage |
: |
Space between shield and ground. |
|
Probe length |
: |
1.5 m |
|
For ScopeCorder Isolated Modules |
||
Get valid waveform measurement results. Oscilloscopes and ScopeCorders make up half of a complete waveform measurement solution. Valid, quality results depend on the probe and how it interacts with the measuring instrument, and connects to the circuit under test.
Yokogawa Test&Measurement brings you a wide range of accessories for many different measurement applications, including high voltage differential probes, passive probes, non-isolated and isolated oscilloscope probes and ScopeCorder probes.
The 701947 isolated voltage probes enable safe high-voltage measurements when used together with DL750, DL750P, SL1400, and SL1000 isolated input modules.
Specifications
 702902 |
 700929 |
 701947 |
 701940 |
|
|---|---|---|---|---|
| Isolation | Isolated | Isolated | Isolated | Non-isolated |
| Frequency bandwidth | 60 MHz | 100 MHz | 200 MHz | 10 MHz |
| Maximum input voltage | 1000 V (DC + ACpeak) | 1000 V (DC + ACpeak) | 3540 V (DC + ACpeak) | 600 V (DC + ACpeak) |
| Attenuation ratio | 10:1 | 10:1 | 100:1 | 1:1, 10:1 |
| Input resistance (with module) | 10 MΩ | 10 MΩ | 100 MΩ | 10 MΩ |
| Input capacitance (typical) | approx. 17 pF | approx. 18 pF | approx. 7 pF | approx. 22 pF (@10:1) |
| Total length | 2.5 m | 1.7 m | 1.7 m | 1.5 m |
| Measurement category | 1000 V (DC + ACpeak) CAT II |
1000 V (DC + ACpeak) CAT II 600 Vrms CAT III |
3540 V (DC + ACpeak) CAT O 1000 V (DC + ACpeak) CAT II |
600 V (DC + ACpeak) CAT II |
Brochures
- 701947-PMK01E (111.4 KB)
- Probes and accessories for Oscilloscopes (2.2 MB)
