AQ2202 Frame controller (9 slots) (DISCONTINUED)

Notice: This product was discontinued on Mar 31, 2010. See this replacement product:

The AQ2201 and AQ2202 frame controllers are platforms for the AQ2200 Multi Application Test System. These frame controllers contain a variety of measurement applications that enable you to get the information you need without connecting an external controller PC. In addition, they have three different external interfaces, so you can always use the best interface for a particular measurement application.

  • Easy-to-view color display
  • Compact Flash (CF) card for datastorage
  • Measurement module “hot-swapping” capability
  • Remote monitoring and measurement through a LAN

Easy-to-view color display

The AQ2201 and AQ2202 both have a 320×240-dot, wide-viewing-angle, high-resolution color TFT display for easy viewing. Even detailed graphs are easy to view on this display.

J016 Tm Aq2201 02
AQ2201 frame controller

J016 Tm Aq2201 03
AQ2202 frame controller

Display screen showing all installed modules

Compact Flash (CF) card for datastorage

The CF card slot makes iteasy to quickly save and load data. Measurements are saved in CSV format, so they can be easily imported into almost any PC application.

J016 Tm Aq2201 04

Measurement module “hot-swapping” capability

Measurement modules can be inserted or removed without turning off the power. This hot-swapping capability makes it easier to reconfigure your system. (warm-up time still required to ensure accurate measurements.)

Remote monitoring and measurement through a LAN

The AQ2201 and AQ2202 support Ethernet as well as GP-IB, which is the standard interface for measuring instruments. Ethernet support makes remote monitoring and control even easier.

AQ2200-215 Sensor module (high Power up to +30dBm, 970 to 1660 nm)

Ideal for measuring output power of transmission equipment and optical fiber amplifiers.

AQ2200-221 Sensor module (Dual channel, long wavelength)

Increase your testing power and capability with the AQ2200-221 sensor module. Thirty two ports can be simlutaneously collectively measured using 16 units of AQ2200-221.

AQ2200-411 Optical Switch Module (1 x 4/1 x 8)

  • AQ2200-411 Optical Switch Module 
  • Superior switching reproducibility
  • Compact optical switches
  • SM, GI50 and GI62.5 optical fiber models available

AQ2200-412 Optical Switch Module (1 x 16)

  • AQ2200-412 Optical Switch Module
  • Superior switching reproducibility
  • Compact
  • SM & GI50 optical fiber models available

AQ2200-421 Optical Switch Module (1 x 2/2 x 2)

  • AQ2200-421 Optical Switch Module
  • Superior switching reproducibility
  • Compact optical switches
  • SM, GI50 and GI62.5 optical fiber models available

AQ2200-211 Sensor module (high sensitivity, long wavelength)

The AQ2200-211 is a high-speed longwave sensor for theAQ2200 series.

AQ2200-141 FP-LD module

The AQ2200-141 and AQ2200-142 provide excellent level stability of ±0.005 dB or better over a 15-minute period and offer excellent stability for all of your measurements.

AQ2200-271 Optical return loss module

Optical Return Loss (ORL) and Insertion Loss (IL) measurements of Optical Component.

AQ2200-111 DFB-LD module (1310nm)

Ideal Reference LightSources for Optical Device Measurements. When the modules are mounted in the AQ2200 series frame controllers, it provides a high-output, high-stability measurement.

AQ2200-601 10 Gbit/s BERT module

Compact bit error rate tester dedicated to high-speed 10 Gbit/s Band

AQ2200-136 TLS module

AQ2200-136 TLS module is a tunable light source designed for the AQ2200 multi-application test system. Although it is lightweight with a small, 2-slot module, it is capable of tuning range the 1440 nm to 1640 nm.

AQ2200-142 DUAL FP-LD module

The AQ2200-141 and AQ2200-142 are FP-LD light sources for the AQ2200 series. When they are mounted in AQ2200 series frame controllers, they provide high-output, high-stability optical output.

AQ2200-231/201 Optical Sensor Head (large diameter, long wavelength)

AQ2200-231 is AQ2200 series longwave large-diameter sensor heads. When they are installed in AQ2200 series frame controllers using the AQ2200-201 Interface Module, they allow optical power to be measured at high speed and with high accuracy.

AQ2200-631 10 Gbit/s optical receiver (1.31/1.55micrometre)

Yokogawa's Optical modulator and optical receiver for 10G BERT module offers high quality features.

AQ2200-641 XFP interface module

Cost efficient and flexible solution to build 10 Gbit/s optical BERT system

Application Note

This system does not require manual reconfiguration of optical paths and adjustments of EDFA input power, and that improves measurement throughput and avoids a human error.

Looking for more information on our people, technology and solutions?

Contact Us

Precision Making