WTViewerEfree Software
The WTViewerEfree is free software for power analyzer models that include WT series*. The software simplifies instrument configuration and gathering of measurements.
*WT5000/ WT3000E/ WT3000/ WT1800R/ WT1800E/ WT1800/ WT500/ WT300E/ WT300
You can use the software to connect the WT series to a PC for access to the following:
- Retrieve, display, and save data that the WT series has measured and set up measurement parameters.
- Remote control of a WT series.
- * Firmware Ver. 2.01 or later is required for the WT5000.
- * Firmware Ver. 2.31 or later is required for WT1800.
- * Firmware Ver. 1.21 or later is required for WT500.
- * Firmware Ver. 6.11 or later is required for WT3000. And it requires to dedicated advance mode setting.
You can use this software to control a single PC-connected WT series.
Setting Window
As well as using the WT series front panel to set up the power analyzer, users can apply the software to quickly set up desired settings. It also shows all the settings and the status at a glance.
Measurement Window
The software can display items that cannot be shown on a screen of the WT series, such as multiple numeric measurement parameters, harmonics data of each other, bar graphs, trend graphs, vector, and voltage & current waveforms together.
Menus
The software has the following menus:
- Connection: Used to configure the communication between the WT series and PC.
- Setting: Used to set WT series measurement conditions.
- Measure: Used to display measured results in bar graphs, trend graphs, etc.
- File: Used to save and load setup parameters.
- Exit: Used to close the software.
Types of Display Screens
Numeric
Displays WT series measurement data numerically. For models with the Harmonic measurement option (/G5, /G6) or the Advanced Calculation option (/G6), harmonic measurement data is also displayed.
Numeric List
Lists harmonic measurement data for each harmonic order. Numeric lists can be displayed when the WT series is equipped with the Harmonic measurement option (/G5, /G6) or the Advanced Calculation option (/G6).
Numeric Matrix
Displays WT series measurement data for each element.
Waveform
Displays waveform display data that has been collected from the WT series.
Trend
Displays changes in measured data over time on a trend graph.
Bar Graph
Displays measured harmonic components for each harmonic order. Bar graphs can be displayed when the WT series is equipped with the Harmonic measurement option (/G5, /G6) or the Advanced Calculation option (/G6).
Vector
Display harmonic measurement parameters (fundamental components) as a vector plot. Vector plots can be displayed when the WT series includes the Harmonic measurement option (/G5, /G6) or the Advanced Calculation option (/G6) and more than 2 sets of the same input elements.
Functions
| Measuring Mode | Normal, harmonics, integration |
| Types of Files | Waveform, calculated values, harmonics, settings |
| Display Screens | Numerical, waveform, trend, harmonic bar graph* and vector plot* * The Harmonic measurement option is required. |
| Data Acquisition Interval | 50 ms at maximum speed. - The data storage period can be any custom setting (more than 20 seconds) and the data update rate of the product. - Depends on your PC's performance.* When the WT series data update interval is shorter than the time it takes for the software to collect one set of measured data, there will be pieces of data that the software will not collect. |
Function List
| Display | Numeric Data |
| Waveform | |
| Trend | |
| Harmonic Bar graph | |
| Vector | |
| Types of Files | Conversion to CSV |
| Data Acquisition Interval | 50 ms at max. speed. |
You can use this software to control a single PC-connected WT series. To control multiple PC-connected power analyzers from a single PC, please use the WTViewerE software application.
System Requirements
| PC | CPU | Equivalent to Intel Core i5-2430M or better |
| Memory | 2 GB or more recommended | |
| Storage | 10GB available free space or more | |
| OS | English version of Windows 10, or Windows 11 | |
| Communication Board | GP-IB | NI (National Instruments, For information on OS support, please contact National Instruments (NI) customer support.) |
| PCI-GPIB, PCI-GPIB+, PCIe-GPIB, PCIe-GPIB+ , GPIB-USB-HS, or GPIB-USB-HS+ Use driver NI-488.2 Ver. 15.5.0 or later. |
||
| RS-232 | An available PC COM port | |
| Ethernet | An Ethernet port that supports 10BASE-T, 100BASE-TX, or 1000BASE-T | |
| USB | A USB port that supports USB Revision 1.1 or higher | |
| Display, Printer, and Mouse | Screen Resolution | 1366×768 pixels or higher |
| Disk Drive | A drive that can read CD-Rs | |
| Operating System | Must be compaible with the operating systems listed above. | |
Nov 29, 2024
- Updated software version to 1.71.
- Added support for WT1800R.
- Added support for 760903 Current Sensor Element.
- Added support for Windows 11, and discontinued support for Windows 8.1.
- Added trigonometric functions to the Computation of User-Defined Functions.
Sep 29, 2022
- Updated software version to 1.53; Fixed the vulnerability of file saving feature.
Oct 27, 2021
- Updated software version to 1.52; Relaxed measurement stop conditions.
Jul 3, 2020
- Updated software version to 1.51
