ScopeCorders Accessories

Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.

Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.

A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.

Passive Probe, 1000V(DC+ACpeak) CAT II, 60MHz, 10:1, 10MΩ, 2.5m
Wide operating temperature range(-40 to 85°C)
For isolated BNC input modules for ScopeCoder series

Passive Probe, 1000Vp CAT II, 100MHz, 10:1, 10MΩ, 1.5m, Isolated Probe, Iso-Probe
Please see also 701947 & accessories.

Passive Probe, 600Vp, 6MHz/10MHz, 1:1, 10:1, 1MΩ/10MΩ, 1.5m '600V Non-Isolated'

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.

Set contains one black and one red clip.
1000 Vrms-CAT II.

Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip. 1000 Vrms-CAT II.

A 1 m long BNC-alligator clip cable.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for DL750/DL750P, SL1000 & SL1400

The 720930 and 720931 passive clamp-on current probes allow current waveform readings directly via analog input modules on ScopeCorders including the DL350 and DL850 using isolated BNC connections.

  • AC 50 A
  • 40 Hz to 3.5 kHz Bandwidth

The 720931 passive clamp-on current probe anables current waveform readings directly via analog input modules on ScopeCorders including the DL350 and DL850 using isolated BNC connections.

  • AC 200 A
  • 40 Hz to 3.5 kHz Bandwidth

Frequency bandwidth: DC to 50 MHz

Maximum continuous input range: 5 Arms

Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.  

Frequency bandwidth: DC to 120 MHz

Maximum continuous input range: 5 Arms

Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.

250 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

100 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

10 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

For DL850/E series

For SL1000 (EIA)

For SL1000 (JIS)

For SL1000, Cable length: 1 m

For SL1000, Cable length: 3 m

Total length: 2 m
USB2.0 Hi-Speed

Connecting cable for 701953 (3 m)

Accessory for GPS interface model (/C30)

For 720220 input terminal, one (1) piece

Soft Case for Accessories

1000 Vrms CAT III black

1000 Vrms CAT III red

Looking for more information on our people, technology and solutions?


Contact Us
 
Top