ScopeCorders Accessories

High-Speed 100 MS/s 12-Bit Isolation Module (2 channels) 
IsoPRO technology enables 1kV isolated measurements in combination with 700929 or 701947 probe and is designed for inverter / IGBT related applications in mind. Using high speed optical fiber-based transmission, the module achieves high speed ADC clock and data isolation and provides the performance needed to develop high efficiency inverters, which employ high voltages, large currents, and ever increasing switching speeds.
Applicable to DL350, DL850 series and SL1000.

The 720250 Voltage Module has a 10 MS/s sample rate, 12-bit resolution, 3 MHz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 800 V*2, 200 V*3, DC accuracy of ±0.5%, and high noise immunity.
Applicable to DL350, DL850 series and SL1000.

High-Speed 1 Ms/s 16-Bit Isolation Module (2 ch)
High sensitivity range (10 mV), low noise (±100 µVtyp), and high noise immunity
Applicable to DL850 series, DL750 series and SL1000.

High-Speed 1 MS/s 16-bit Isolation Module (4 ch) 
High Noise Immunity  
Suitable for testing and long term monitoring for power generators and multi-output power supplies. Provides dynamic analysis of multi-channel data recording applications. 
Applicable to DL350 and DL850 series.

High-Speed 10 MS/s 12-Bit non-isolation Module (2 ch)
Non-Isolation version of model 720250
Applicable to DL850 series, DL750 series and SL1000.

The 720268 High Voltage Module has a 1 MS/s sample rate, 16-bit resolution, 300 kHz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 1000V*9 *11, DC accuracy of ±0.25%, and AAF, RMS, and high noise immunity.
Applicable to DL350, DL850 series and SL1000.

This is a multichannel voltage module capable of measuring 16 channels of DC voltage on a single unit.

  • Isolated (GND-terminal)
  • Non-Isolated (CH-CH) 
  • Maximum allowable voltage between sub-channel high inputs 42V (DC + AC Peak)
Applicable to DL350 and DL850 series.

Universal Module (2 ch)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel)
Applicable to DL350, DL850 series, DL750 series and SL1000.

Universal Module (with Anti-Aliasing Filter, 2 ch)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), with AAF
Applicable to DL350, DL850 series, DL750 series and SL1000.

Temperature/high-precision voltage Module (2 ch)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (1 mV), and low noise (±4 µVtyp)
Applicable to DL350, DL850 series, DL750 series and SL1000.

The 720266 Module has a 125 S/s (Voltage) and 125 S/s (Temperature) sample rate. It has a 16-Bit (Voltage),
0.1°C (Temperature) resolution, 15 Hz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 42V, DC accuracy of ±0.08% (Voltage), and thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (0.1 mV/div), and low noise (±4 µVtyp.).
Applicable to DL350, DL850 series and SL1000.

16 Channel Voltage or Temperature Input Module.
To be used with 701953 Scanner Box.
Applicable to DL350 and DL850 series.

External scanner box for 720221 module.
Voltage or temperature measurement (scanner method) Thermocouple (K, E, J, T, L, U, N, R, S, B, W, Au-Fe-chromel)

Strain Module, type NDIS (2 channels) to be used in combination with 701955 or 701956 NDIS bridge head.
Using the strain module and strain gauge the ScopeCorder can detect and display mechanical stress (strain). It works on the principle that the resistance value of a metal foil changes as it expands and contracts.
Applicable to DL350, DL850 series, DL750 series and SL1000.

Strain Module with Shunt Calibration, type DSUB (2 channels) to be used in combination with 701957 or 701958 DSUB bridge head.
Using the strain module and strain gauge the ScopeCorder can detect and display mechanical stress (strain). It works on the principle that the resistance value of a metal foil changes as it expands and contracts.
Applicable to DL350, DL850 series, DL750 series and SL1000.

Acceleraton/Voltage Module with Anti-Aliasing Filter, (2 channels)
Accepts direct input from a built-in amp type acceleration sensor to measure acceleration. Sensor supply current (voltage) OFF/4 mA ± 10% (approx. 22 VDC) Applicable acceleration sensor  type: Built-in amplifier type, Kistler Instruments Corp. : PiezotronTM, PCB, Piezotronics Inc. : ICPTM, Endevco Corp : IsotronTM.
Applicable to DL350, DL850 series and SL1000.

The 720281 Frequency Module has a 1 MS/s sample rate, 16-bit resolution, bandwidth of resolution 625 ps, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 420 V*2, 42 V*3, DC accuracy of ±0.1% (Frequency), and measurement frequency of 0.01 Hz to 500 kHz. The measured parameters are frequency, rpm, period, duty, power supply frequency, distance, and speed.
Applicable to DL350, DL850 series and SL1000.

Input logic signals can be displayed as waveforms at 10 MS/s sampling resolution. Each port can measure 8 bits, and 2 ports of input are available on each module. Thus, a single module can observe 16-bit logic signals. Compatible with 700986, 700987, 702911 and 702912 logic probe.
Applicable to DL350 and DL850 series.

Use the CAN/CAN FD Monitor Module to decode the CAN/CAN FD-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors. Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

Use the CAN/LIN bus monitor module to decode the CAN or LIN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.
Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

Use the SENT monitoring module to decode the SENT protocol signal and display information on physical quantities from SENT output sensors.
Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

200 MHz, 100:1, Isolated BNC, ±1000 V (DC + ACpeak) CAT II ±3540 V (DC + AC peak) CAT I, 1.5 m
For ScopeCorder Isolated Modules

Passive Probe, 1000V(DC+ACpeak) CAT II, 60MHz, 10:1, 10MΩ, 2.5m
Wide operating temperature range(-40 to 85°C)
For isolated BNC input modules for ScopeCoder series

100 MHz, 10:1, Isolated BNC, 1000 V CAT II, 1.5 m
For ScopeCorder Isolated Modules

10 MHz, 10:1/1:1, 600 V (DC + ACpeak) CAT II, 1.5 m
For ScopeCorder Non-Isolated Modules

100 MHz, 1000:1/100:1, Max. Differential Voltage: ±1400 V (DC + ACpeak) at 1000:1, Probe Power: Internal battery or probe power supply Work with Oscilloscopes, ScopeCorders

15 MHz, 100:1/10:1, Max. Differential Voltage: ±500 V (DC + ACpeak) or 350 Vrms at 100:1 attenuation, Probe Power: Internal battery or probe power supply Work with Oscilloscopes, ScopeCorders

50 MHz, 1000:1/100:1, Max. Differential Voltage: 5000 Vrms/7000 Vpeak (1000:1), Probe Power: Internal battery or probe power supply B9852MJ power cable is bundled Work with Oscilloscopes, ScopeCorders

50 MHz, 1000:1 / 100:1, Max. Differential Voltage: 5000 Vrms and 7000 Vpeak or less
Probe Power : probe power supply

150 MHz, 500:1 / 50:1, Max. Differential Voltage:±1500 V (DC + ACpeak)
Probe Power:probe power supply

Frequency bandwidth: DC to 50 MHz

Maximum continuous input range: 5 Arms

Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.  

Frequency bandwidth: DC to 120 MHz

Maximum continuous input range: 5 Arms

Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

The 720930 and 720931 passive clamp-on current probes allow current waveform readings directly via analog input modules on ScopeCorders including the DL350 and DL850 using isolated BNC connections.

  • AC 50 A
  • 40 Hz to 3.5 kHz Bandwidth

The 720931 passive clamp-on current probe anables current waveform readings directly via analog input modules on ScopeCorders including the DL350 and DL850 using isolated BNC connections.

  • AC 200 A
  • 40 Hz to 3.5 kHz Bandwidth

A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.

The B9852MJ cable supplies power to the 700924, 700925 and 701921 differential probes* from the DL probe power con-nectors. (The probe power option is re-quired on the DL unit.)
* Cable only works with newer 700924, 700925 and 701921 probes that indicate "6VDC or 9VDC"at the probe input power connector. 

250 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

100 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

10 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

For DL850/E series, PX8000

Applicable for DL850 and WT300 series.

8-bit, non-isolated, response speed: 1µs, threshold level approx 1.4V
Two measurement leads (B9879PX and B9879KX) included.

8-bit, isolated, response speed: 1ms or less (DC), 20ms or less (AC), treshold level 6VDC or 50VAC.
To be used with measurement lead 758917 and 758922, 758929 or 701954 adapter leads.

8-bit, non-isolated, response speed: 3µs or less, treshold level approx 1.4V
702911: 1 meter cable, 702912: 3 meter cable

Connecting cable for 701953 (3 m)

For the DC power supply model (/DC). Cigarette lighter plug type.

For the DC power supply model (/DC). Allgator clip type.

Rated supply voltage 10 to 30 VDC (at the DL350 connector end).
Maximum power consumption 45 W.
Withstand voltage (when the power is turned off or charging is stopped).
0.6 Wtyp.
DC power cable Cigarette lighter plug Type, length: 2.5 m.

For SL1000, Cable length: 1 m

For SL1000, Cable length: 3 m

Total length: 2 m
USB2.0 Hi-Speed

An NDIS connector for direct connection to a strain module.

Accessory for GPS interface model (/C30)

For DL350

701955 NDIS Bridge Head, Bridge resistance: 120Ω , 5m NDIS cable included
701956 NDIS Bridge Head, Bridge resistance: 350Ω , 5m NDIS cable included

701957 DSUB Bridge Head with Shunt calibration
Bridge resistance:  120Ω , 5m DSUB cable included
701958 DSUB Bridge Head with Shunt calibration
Bridge resistance:  350Ω , 5m DSUB cable included

T-adapter for BNC connectors. Use for circuits having voltage levels no greater than 42 V.

Safety-terminal-binding-post adapter. Use for circuits having voltage levels no greater than 42 V.

For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.

A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.

2 pieces (red and black) in 1 set
length: 1.00 m
Used in combination with the 701959, 758921, 758922, or 758929
Rating: 1000 V CAT III/19 A

1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.

1:1 Safety Adapter Lead for the 720268 High Voltage Input Module

Set contains one black and one red clip
1000 Vrms-CAT II
2 pieces (red and black) in 1 set 
Connected to the 758933, 758917, or 701901
Length: 0.3m
Applicable for DL750/DL750P, SL1000, SL1400

1000 Vrms CAT III black

1000 Vrms CAT III red

Connected to the 700929, 701947
Maximum input voltage: 1,000V (DC + ACpeak)
Length: 0.26m/0.3m/0.4m
Applicable for DL750/DL750P, SL1000, SL1400

Set contains one black and one red clip.
1000 Vrms-CAT II.

Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.

Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.

Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip. 1000 Vrms-CAT II.

Two adapters in a set (spring-hold type).

Screw-fastened adapters. Two adapters in a set. 1.5 mm Allen Wrench.

701902: 1000 Vtms-CAT II (BNC-BNC), 1 m
701903: 1000 Vrms-CAT II (BNC-BNC), 2 m

BNC-BNC 1m. For connection to simultaneously measurement with 2 units, or for input external trigger signal. 

BNC-BNC 2m. For connection to simultaneously measurement with 2 units, or for input external trigger signal.

A 1 m long BNC-alligator clip cable.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for DL750/DL750P, SL1000 & SL1400

A subassembly of 1.2 m long test leads with alligator-clip adapters.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for SL1000 & SL1400.

For 720220 input terminal, one (1) piece

Using a probe stand with a flexible arm and heavy base to hold and stabilize probes can simplify circuit board testing.

Quality paper for the DLM2000 /DLM4000 /DL850 /DL6000 /DL9000 and DL750

This is an AC Adaptor for the DL350 Portable Scopecorder available for use in multiple global regions (North America adaptor pictured).

for DL350, AQ7280 and MT300

Battery pack cover for the 739883 Batery pack.

For DL850/E series

Three pockets are provided for storing accessories and the user’s manual.

Carry your Scopecorder with this carrying case.

Soft Case for Accessories

For SL1000 (EIA)

For SL1000 (JIS)

Frequency bandwidth: DC to 50 MHz

Maximum continuous input range: 0.5 Arms/ 5 Arms/ 30 Arms

Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments

Frequency bandwidth: DC to 120 MHz

Maximum continuous input range: 0.5 Arms/5 Arms/30 Arms

Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments

Looking for more information on our people, technology and solutions?


Contact Us
 
Top