DL350 Portable ScopeCorder

The DL350 Portable ScopeCorder combines all the measurement and recording capabilities you need when you are away from your office or lab - all in one compact instrument.

Featuring a resistive touch screen, the DL350 provides the flexibility you need when you need it. Whether you are recording high-speed transients or long-term signals, using “quick and simple” setup or advanced features, the DL350 makes complete measurements completely portable.

Transient recording and complete data measurement in one compact solution

As the portable instrument in Yokogawa’s ScopeCorder family, the DL350 offers:

Portability

  • A4-sized compact chassis
  • Battery power for 3.5 hours
  • Resistive touch screen
  • Memory recorder mode for easy data logging setup

Mobility

  • GPS recording: longitude, latitude, velocity, and more
  • Designed for vehicle testing
  • Records to SD cards

Modularity

  • Compatible with 19 different input modules
  • Up to 8 channels analog inputs
  • Up to 100 MS/s sampling rate
  • Up to 16-bit analog resolution

 

Flexible and swappable input modules with built-in signal conditioning

Choose from 20 types of input modules and install up to 2 in the DL350 Portable ScopeCorder at a time to capture up to 32 channels plus 16 built-in channels of digital input. Input types include:

  • Voltage & Currents
  • Sensor Outputs
  • Temperature, Vibration/Acceleration, Strain, Frequency
  • Logic Signals & CAN / CAN FD / LIN and SENT

DL350 Noise And Vibration Proof

Use it like a data acquisition system or a long memory oscilloscope

Up to 20 Gpoints* of data per module can be recorded directly to an SD card. This means that the DL350 can be used for continuous recording for up to 50 days. For high speed signals, up to 100 M points per module of internal memory is available to capture fast transients. This is up to 10,000 times more than other portable oscilloscopes or test tools and thus signals can be captured with higher sample rates or for much longer periods.

* The firmware version 1.20 or later is required.

Verify power line quality using harmonic, power or FFT analysis

The power in single- and 3-phase systems can be evaluated. Additionally for fundamental waveforms of 50 or 60 Hz, up to 40 harmonic orders can be analyzed. Alternatively use the suite of FFT functions to perform full frequency analysis.

DL350 Harmonic Bar Graph
Harmonics analysis (bar graph)

DL350 FFT Analysi
FFT analysis

Environmental features for portability

Vibration resistant
Instruments used for in-vehicle driving tests or field maintenance must be able to make reliable measurements. The DL350 has an aluminum inner frame and an external rubber bumper and conforms to the Japanese JIS D1601 standard for resisting in-vehicle shock and vibration.

Wide Temperature Range
Even when used with the rechargeable battery, the DL350 will operate in temperatures from 0 to 45 degrees. The DL350 brings high-quality laboratory measurements into the harsh environments of the field.

A wealth of triggers for fault finding

The user has a choice of a simple level trigger or can use enhanced triggers such as pulse width, waveform period and triggers across multiple channels. For example, the wave window trigger is ideal for AC power line monitoring which enables voltage sags, surges, spikes, phase shifts or drop outs to be easily captured (available for 40 to 1,000 Hz waveforms).

Leave a DL350 unattended and automatically save the waveform to a file or send a notification email if and when it triggers.

DL350 Trigger

Vehicle Edition

The ScopeCorder Vehicle Edition is designed for engineers working in the automotive and railway industry, providing a thorough insight into the dynamic behavior of the electromechanical system. This integrated approach results in considerable time saving compared to using multiple separate instruments.

Download the eBook to learn more. 

In-vehicle Testing

CAN/CAN FD bus, LIN bus and SENT monitoring

Use the DL350 with /VE option and bus monitor module to decode CAN/CAN FD bus, LIN bus or SENT signals and display information such as engine temperature, vehicle speed and brake pedal position as trend waveforms and compare this with the analog data coming from the actual sensors. This enables automotive engineers to gain an insight into the dynamic behavior of the complete electromechanical system.

DL350 CAN LIN SENT

Memory recorder mode simplifies data recording for maintenance and monitoring tasks.

The DL350 offers a choice of operating modes, including recorder mode, which makes it easier than ever to set up long-term data recordings. Choose Easy Setup, and the setup wizard quickly guides the operator through the entire setup process. Just select the desired channels, recording duration, and sampling interval, and press Start!

Choosing Easy Setup opens a guided, three-step process to begin recording for up to 50 days.

 

Use the touchscreen during recording to scroll across the entire data set.

 

Long-Term Temperature Monitoring

Using the DL350 Memory Recorder Mode Easy Setup, combined with a 16-channel thermocouple input, it's easy to record hours, days, or weeks of data with a few simple settings.

 

Examples of Complex Measurements

Field Application Purpose Measurement Item User Advantages
Slot 1 Slot 2
EV (electric vehicle) Evaluation of battery
voltage fluctuation
while driving
Battery voltage CAN/CAN FD communication data Small size, battery drive,
synchronization with GPS*
position and time data
Power tool Evaluation of
practical behavior
Battery voltage, motor rotation pulse Tool vibration Small size, battery drive,
complex measurement of
voltage and vibration
Field device Maintenance of
ultrasonic-type
vortex flow meter
Sensor receiving wave,
receiving pulse
Gate signal Small size, 2-way power
source, long-term monitoring
with long memory
Factory/plant Power quality
monitoring
AC power,
voltage, current
Auxiliary power
source monitor
Small, portable, window
trigger (instantaneous power
failure, sag detection)
Steel making
Paper making
Rolling process
monitoring
Thickness gauge
monitor
Temperature High noise immunity,
external clock (roller)
synchronization

 

Logging GPS and Analog Data

Combining position, altitude, and motion data with precise timing, location-based data acquisition is easy with the DL350.

 

Combining Motion and Analog Measurements

Capture data from motion accelerometers synchronized with other analog data. The DL350 series ScopeCorder features input modules and functions to make this possible.

 

 

 

 

Power Line Monitoring in Plants and Factories

By using a wave-window trigger, voltage sags, surges, spikes and dropouts can be detected and captured.

Multi-phase voltages up to 1 kVrms and 1.4 kV peak can be recorded using 720268 high-voltage isolation modules.

In the case of unattended operation, waveforms can be saved, or an e-mail sent, when the DL350 is triggered.

DL350 Power Line

Industrial robot maintenance

It is possible to monitor and record the control signals to the servomotors and their speed and torque at the same time.

For condition monitoring, FFT analysis can be used on the vibration signals from accelerometers to help identify potential failures in machines or components.

Remote operation is available using the ‘assistant software’ or the input/output terminals making it potentially safer to use.

DL350 Robot Maintenance

Additional Option License for DL350

This is a software license allowing users to add “vehicle edition”, a software option for the DL350 ScopeCorder, by themselves after purchasing the main unit.

PC data and setup file management

DL350 Assistant software
Data files or setup configuration files stored in the DL350 SD card can be backed up with the press of a button. Remote setting, start-stop control and setup file editing can also be easily done on the connected PC.

Download free software.

Remote waveform monitoring and instrument control

XWirepuller 
Remote control and waveform display monitoring of a DL350 via USB or Ethernet.

Download free software.

Display and analysis of recorded waveforms

DL350 Xviewer LITE Xviewer LITE
Load waveforms captured by the DL350 and display, zoom, and export the data to the popular CSV format.

Download free software.

Xviewer 
The full version of XViewer also enables parameter measurement, statistical analysis, FFT, and filtering.

Download 30-day trial software.

LabVIEW Driver for DL350
National Instruments LabVIEW Driver for DL350 is available.

Download free software.

WDF File Access Library
WDF File Access Library is the API to access waveform data files saved in WDF format.
* VisualStudio 2008 SP1 is required to use this software.

Download free software.

MATLAB WDF Access Toolbox
MATLAB WDF Access Toolbox enables the access to waveform data files saved in WDF format on MATLAB.
To control the instruments on MATLAB, please use Instrument Control Toolbox provided by MathWorks.

Download free software.

DIAdem Data Plugin
Use the data plugin to load DL350 measurement data and GPS data (latitude, longitude, altitude, speed and motion direction) into NI DIAdem.

Download free data plugin.

DL350 Connection Interface

DL350 Connection Interface 2

LCA  Compared to the reference product DL850E, CO2 emission was reduced by about 70%.

PDFResults of Life Cycle Assessment

720211 High-Speed 100 M/s, 12-Bit Isolation Module

High-Speed 100 MS/s 12-Bit Isolation Module (2 channels) 
IsoPRO technology enables 1kV isolated measurements in combination with 700929 or 701947 probe and is designed for inverter / IGBT related applications in mind. Using high speed optical fiber-based transmission, the module achieves high speed ADC clock and data isolation and provides the performance needed to develop high efficiency inverters, which employ high voltages, large currents, and ever increasing switching speeds.
Applicable to DL350, DL850 series and SL1000.

720250 Voltage Module 10MS/s

The 720250 Voltage Module has a 10 MS/s sample rate, 12-bit resolution, 3 MHz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 800 V*2, 200 V*3, DC accuracy of ±0.5%, and high noise immunity.
Applicable to DL350, DL850 series and SL1000.

720254 4-CH 1M/s 16-Bit Isolation Module

High-Speed 1 MS/s 16-bit Isolation Module (4 ch) 
High Noise Immunity  
Suitable for testing and long term monitoring for power generators and multi-output power supplies. Provides dynamic analysis of multi-channel data recording applications. 
Applicable to DL350 and DL850 series.

720268 High Voltage Module 1MS/s

The 720268 High Voltage Module has a 1 MS/s sample rate, 16-bit resolution, 300 kHz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 1000V*9 *11, DC accuracy of ±0.25%, and AAF, RMS, and high noise immunity.
Applicable to DL350, DL850 series and SL1000.

720220 16 Channel Voltage Input Module

This is a multichannel voltage module capable of measuring 16 channels of DC voltage on a single unit.

  • Isolated (GND-terminal)
  • Non-Isolated (CH-CH) 
  • Maximum allowable voltage between sub-channel high inputs 42V (DC + AC Peak)
Applicable to DL350 and DL850 series.

701261 Universal Voltage & Temperature Input Module

Universal Module (2 ch)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel)
Applicable to DL350, DL850 series, DL750 series and SL1000.

701262 Universal Voltage & Temperature Input Module (w/AAF)

Universal Module (with Anti-Aliasing Filter, 2 ch)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), with AAF
Applicable to DL350, DL850 series, DL750 series and SL1000.

701265 High-Precision Temperature Input Module

Temperature/high-precision voltage Module (2 ch)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (1 mV), and low noise (±4 µVtyp)
Applicable to DL350, DL850 series, DL750 series and SL1000.

720266 High-Sensitivity, Low-Noise, Voltage, Temperature Module

The 720266 Module has a 125 S/s (Voltage) and 125 S/s (Temperature) sample rate. It has a 16-Bit (Voltage),
0.1°C (Temperature) resolution, 15 Hz bandwidth, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 42V, DC accuracy of ±0.08% (Voltage), and thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (0.1 mV/div), and low noise (±4 µVtyp.).
Applicable to DL350, DL850 series and SL1000.

720221 16-CH Temperature/Voltage Input Module

16 Channel Voltage or Temperature Input Module.
To be used with 701953 Scanner Box.
Applicable to DL350 and DL850 series.

701953 16-CH Scanner Box

External scanner box for 720221 module.
Voltage or temperature measurement (scanner method) Thermocouple (K, E, J, T, L, U, N, R, S, B, W, Au-Fe-chromel)

701270 Strain Input Module (NDIS)

Strain Module, type NDIS (2 channels) to be used in combination with 701955 or 701956 NDIS bridge head.
Using the strain module and strain gauge the ScopeCorder can detect and display mechanical stress (strain). It works on the principle that the resistance value of a metal foil changes as it expands and contracts.
Applicable to DL350, DL850 series, DL750 series and SL1000.

701271 Strain Input Module (DSUB)

Strain Module with Shunt Calibration, type DSUB (2 channels) to be used in combination with 701957 or 701958 DSUB bridge head.
Using the strain module and strain gauge the ScopeCorder can detect and display mechanical stress (strain). It works on the principle that the resistance value of a metal foil changes as it expands and contracts.
Applicable to DL350, DL850 series, DL750 series and SL1000.

701275 Acceleration & Voltage Input Module (w/AAF)

Acceleraton/Voltage Module with Anti-Aliasing Filter, (2 channels)
Accepts direct input from a built-in amp type acceleration sensor to measure acceleration. Sensor supply current (voltage) OFF/4 mA ± 10% (approx. 22 VDC) Applicable acceleration sensor  type: Built-in amplifier type, Kistler Instruments Corp. : PiezotronTM, PCB, Piezotronics Inc. : ICPTM, Endevco Corp : IsotronTM.
Applicable to DL350, DL850 series and SL1000.

720281 Frequency Module

The 720281 Frequency Module has a 1 MS/s sample rate, 16-bit resolution, bandwidth of resolution 625 ps, 2 isolated channels, a maximum input voltage (DC+ACpeak) of 420 V*2, 42 V*3, DC accuracy of ±0.1% (Frequency), and measurement frequency of 0.01 Hz to 500 kHz. The measured parameters are frequency, rpm, period, duty, power supply frequency, distance, and speed.
Applicable to DL350, DL850 series and SL1000.

720230 Logic Input Module

Input logic signals can be displayed as waveforms at 10 MS/s sampling resolution. Each port can measure 8 bits, and 2 ports of input are available on each module. Thus, a single module can observe 16-bit logic signals. Compatible with 700986, 700987, 702911 and 702912 logic probe.
Applicable to DL350 and DL850 series.

720242 CAN/CAN FD Monitor Module

Use the CAN/CAN FD Monitor Module to decode the CAN/CAN FD-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors. Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

720241 CAN/LIN Bus Monitor Module

Use the CAN/LIN bus monitor module to decode the CAN or LIN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.
Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

720243 SENT Monitor Module

Use the SENT monitoring module to decode the SENT protocol signal and display information on physical quantities from SENT output sensors.
Applicable to DL850V & DL850EV, DL350 (/EV option) ScopeCorder Vehicle Edition only.

700929 Isolated Passive Probe 1000V / 100 MHz

Passive Probe, 1000Vp CAT II, 100MHz, 10:1, 10MΩ, 1.5m, Isolated Probe, Iso-Probe
Please see also 701947 & accessories.

700986 Logic Probe

8-bit, non-isolated, response speed: 1µs, threshold level approx 1.4V
Two measurement leads (B9879PX and B9879KX) included.

700987 Logic Probe - Isolated Inputs

8-bit, isolated, response speed: 1ms or less (DC), 20ms or less (AC), treshold level 6VDC or 50VAC.
To be used with measurement lead 758917 and 758922, 758929 or 701954 adapter leads.

701917 Current Probe 50 MHz / 5 ARMS

Frequency bandwidth: DC to 50 MHz

Maximum continuous input range: 5 Arms

Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.  

701918 Current Probe 120 MHz / 5 ARMS

Frequency bandwidth: DC to 120 MHz

Maximum continuous input range: 5 Arms

Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.

701930 Current Probe 10 MHz / 150 ARMS

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

701931 Current Probe 2 MHz / 500 ARMS

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

701932 Current Probe 100 MHz / 30 ARMS

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

701933 Current Probe 50 MHz / 30 ARMS

Current probe powered by Yokogawa Digital Oscilloscopes, Scopecorders or external power supply.

701940 Passive Probe 600V / 10 MHz

Passive Probe, 600Vp, 6MHz/10MHz, 1:1, 10:1, 1MΩ/10MΩ, 1.5m '600V Non-Isolated'

701947 Isolated Probe 1000V / 200 MHz

Passive Probe, 3540Vp-CAT I, 1000Vp-CAT II, 200MHz, 100:1, 100MΩ, 1.5m, 'Isolated Probe'  'Iso-Probe'

702902 Isolated Passive Probe 1000V / 60 MHz

Passive Probe, 1000V(DC+ACpeak) CAT II, 60MHz, 10:1, 10MΩ, 2.5m
Wide operating temperature range(-40 to 85°C)
For isolated BNC input modules for ScopeCoder series

702911-702912 Logic Probe

8-bit, non-isolated, response speed: 3µs or less, treshold level approx 1.4V
702911: 1 meter cable, 702912: 3 meter cable

720930 Clamp on Probe

The 720930 and 720931 passive clamp-on current probes allow current waveform readings directly via analog input modules on ScopeCorders including the DL350 and DL850 using isolated BNC connections.

  • AC 50 A
  • 40 Hz to 3.5 kHz Bandwidth

720931 Clamp on Probe

The 720931 passive clamp-on current probe anables current waveform readings directly via analog input modules on ScopeCorders including the DL350 and DL850 using isolated BNC connections.

  • AC 200 A
  • 40 Hz to 3.5 kHz Bandwidth

701934 External Probe Power Supply

A power supply for current probes, FET probes, and differential probes. Supplies power for up to four probes, including large current probes.

366926 BNC to Alligator 1m Cable, 1:1

A 1 m long BNC-alligator clip cable.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for DL750/DL750P, SL1000 & SL1400

366961 Banana to Alligator 1.2m Cable, 1:1

A subassembly of 1.2 m long test leads with alligator-clip adapters.
Use only for circuits having voltage levels no greater than 42 V.
Applicable for SL1000 & SL1400.

701902/701903 Safety BNC to BNC Cable 1m/2m

701902: 1000 Vtms-CAT II (BNC-BNC), 1 m
701903: 1000 Vrms-CAT II (BNC-BNC), 2 m

705926 Connection Cable for DA4, DA12, Scanner Box (701953)

Applicable for DL850 and WT300 series.

705927 Connecting cables

Connecting cable for 701953 (3 m)

720922 AC Power Cable

Rated supply voltage 10 to 30 VDC (at the DL350 connector end).
Maximum power consumption 45 W.
Withstand voltage (when the power is turned off or charging is stopped).
0.6 Wtyp.
DC power cable Cigarette lighter plug Type, length: 2.5 m.

438920 Shunt resistor

250 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

438921 Shunt resistor

100 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

438922 Shunt resistor

10 Ω ±0.1%, 0.3 W, ±25 ppm/ ̊C

701901 BNC to Safety Banana 1.8m Cable, 1:1

1000 Vrms-CAT II, 1.8 m long
Safety BNC(male) to safety banana(female) use in combination with 701959, 701954, 758921, 758922 or 758929.

701904 1 to 1 Safety Adapter Lead

1:1 Safety Adapter Lead for the 720268 High Voltage Input Module

758917 DMM Measurement Lead Set

A set of 0.8m long red and black test leads, used in combination with a pair of optional 758922 or 758929 alligator-clip adapters.

758933 Measurement lead

2 pieces (red and black) in 1 set
length: 1.00 m
Used in combination with the 701959, 758921, 758922, or 758929
Rating: 1000 V CAT III/19 A

701906 Long Test Clip

Set contains one black and one red clip
1000 Vrms-CAT II
2 pieces (red and black) in 1 set 
Connected to the 758933, 758917, or 701901
Length: 0.3m
Applicable for DL750/DL750P, SL1000, SL1400

701948 Extension Clip Accessories

Connected to the 700929, 701947
Maximum input voltage: 1,000V (DC + ACpeak)
Length: 0.26m/0.3m/0.4m
Applicable for DL750/DL750P, SL1000, SL1400

701954 Large Alligator Clip (dolphin type)

Set contains one black and one red clip.
1000 Vrms-CAT II.

758921 Fork terminal adapter

Adapters for fitting a 4mm banana plug to a fork terminal. Set contains one black and one red clip. 1000 Vrms-CAT II.

758922 Small Alligator-Clip Adapter 300V

Rated at 300 V. Attaches to the 758917 test leads. Sold in pairs.

758929 Large Alligator Clip Adapter 1000V

Rated at 1000V. Attaches to the 758917 test leads. Sold in pairs.

758924 BNC to Banana Conversion Adapter

For conversion between BNC and female banana plug
Applicable for DL750/DL750P, SL1000 & SL1400.

B9852MM Pinchers tip (Hook type)

1000 Vrms CAT III black

B9852MN Pinchers tip (Hook type)

1000 Vrms CAT III red

720921 AC Adaptor for DL350

This is an AC Adaptor for the DL350 Portable Scopecorder available for use in multiple global regions (North America adaptor pictured).

739883 Battery Pack

Type Lithium-ion
Operation time Approx. 3 hours
Charge time Approx. 6 hours (When the DL350 is turned off.)

720923 Batter Pack Cover

Battery pack cover for the 739883 Batery pack.

701955/701956 NDIS Bridge Heads 120Ω/350Ω

701955 NDIS Bridge Head, Bridge resistance: 120Ω , 5m NDIS cable included
701956 NDIS Bridge Head, Bridge resistance: 350Ω , 5m NDIS cable included

701957/701958 D-Sub Bridge Heads 120Ω/350Ω

701957 DSUB Bridge Head with Shunt calibration
Bridge resistance:  120Ω , 5m DSUB cable included
701958 DSUB Bridge Head with Shunt calibration
Bridge resistance:  350Ω , 5m DSUB cable included

720940 GPS Unit

For DL350

93050 Carrying Case

Carry your Scopecorder with this carrying case.

A1800JD Terminal

For 720220 input terminal, one (1) piece

Overview:

How can I capture data from motion sensors synchronized with other analog data? The Yokogawa ScopeCorder series of instruments feature input modules and functions to make this possible. 

Overview:

Testing actuation of a side impact airbag to measure the optimal timing.

Download eBook: Unique measuring instrument for automotive design engineers
(Download eBook: Unique measuring instrument for automotive design engineers)
Edition 2017
Download eBook: Automotive testing - Applications and solutions for measuring vehicle efficiency
(Automotive testing: Applications and solutions for measuring vehicle efficiency)
Edition 2018
Industries:
Technical Article
Yokogawa VIP Suite for Automotive Design Engineers
(Yokogawa VIP Suite for Automotive Design Engineers)
Edition 2017
Technical Article
Edition 2018
Overview:

More than a test tool 

Typically, a portable scope or test tool is used by an engineer to diagnose faults on a production line in real-time, or to carry out tests in a workshop. But how can faults be detected and diagnosed when they are intermittent and the engineer needs to be somewhere else? On the other hand, a portable data logger can capture lots of data, including the faults over a period of time, but requires the data to be searched and analysed later to make sense of it.

Technical Article
Yokogawa VIP Suite for Power Measurements
(Yokogawa VIP Suite for Power Measurements)
Edition 2018
T&M Magazine ed. 6 - Automotive (Jan 2019)
(T&M Magazine ed. 6 - Automotive (Jan 2019))
Edition 062019
Industries:
Overview:

This comprehensive training module covers the following topics:

  • Introduction & Product Familiarization
  • Basic Features
  • Advanced Features
  • Step-by-Step Video Demonstrations of Features
Edition 12.2018
Overview:

In this customer case story, Reiner Schultheiss; electrical engineer at Michelin tire manufacturing, reflects on his time with the company and explains how the portable Yokogawa DL350 ScopeCorder was welcomed to Michelin and how it ensures quality at the tire manufacturing process. In this customer case story, Reiner Schultheiss; electrical engineer at Michelin tire manufacturing, reflects on his time with the company and explains how the portable Yokogawa DL350 ScopeCorder was welcomed to Michelin and how it ensures quality at the tire manufacturing process. 

Case Study | Brompton goes electric
(Brompton Bikes Case Study)
Edition 2019
Overview:

As a respected pioneer in folding bikes, Brompton’s first foldable e-bikes was eagerly anticipated. However, to develop such high-performance e-bikes engineers at Brompton needed to perform comprehensive dynamic testing to achieve rider – bike harmony.

 

Edition 04.2019
Overview:

As a one of the largest motorcycle manufacturers, Triumph confirms every bike is precision-engineered to deliver a complete riding experience. To ensure higher performance and efficiency of the motorcycle powertrain, Triumph test their engines under rigorous conditions, measuring and analyzing a vast array of parameters under varying conditions, from sensors configured and positioned all around a bike. 

Product Overviews

    Overview:

    In this video we review the major features of the DL350 showcasing its portability, functionality, and operability. This device features battery power, 18 signal conditioning input modules, and touchscreen access to enhanced triggers, math, and analysis.

    Overview:

    Watch a step-by-step walkthrough of recording GPS position and motion data on the DL350.

    Overview:

    Capture, display, record and analyze the widest variety of electrical and physical parameters in automotive, transportation, electronics, energy and mechatronics. In this video Lee Thomas, Yokogawa T&M Sales Manager in the UK showcases the Yokogawa DL350 ScopeCorder. 

How-tos

    Overview:

    A demonstration reading a 4 - 20 mA transducer into an analog channel on the DL350 Portable ScopeCorder.

    Overview:

    Using the DL350 Memory Recorder Mode Easy Setup, combined with a 16-channel thermocouple input, it's easy to record hours, days, or weeks of data with a few simple settings. 

    Overview:

    In this video we demonstrate the GPS data logging capability of the DL350 Portable ScopeCorder. Recording Position, Velocity, and Altitude simultaneously with accelerometers or other analog inputs is simple with the DL350's built-in features.

    Overview:

    In this video we demonstrate the automotive bus decoding features of the DL850EV ScopeCorder.

Webinars

Looking for more information on our people, technology and solutions?


Contact Us
 
Top