AQ7933 OTDR Emulation Software

AQ7933 is application software to display and analyze the waveform data measured on a YOKOGAWA OTDR and create and output reports of analysis results on a PC. It displays up to 20 waveforms at the same time and creates a work report in 3 steps. The software integrates applications that the previous software doesn’t have, such as the OTDR remote controller, and assists field engineers in their waveform confirmation work.
We offer a trial version of the software, in which all the functions are available for 60 days.

Main Features

Analysis
File load* File type: SOR, SOZ, MPZ, MPJ, SMP
File save File type: SOR, SMP
File export File type: CSV, TXT, BMP
SOR file analysis Waveform load Up to 1000 waveforms
Waveform display Up to 20 waveforms, multi-trace display
Analysis method One way analysis (normal analysis), two-way analysis (2way Analysis)
Marker analysis Loss and distance between two points, splice loss, return loss, section analysis
Event analysis Event editing, AutoSearch, Batch Processing, Pass Fail Judgment
Master event setting Set events collectively on multiple waveforms
SMP file analysis Waveform load Up to 10 waveforms
Waveform display Up to 10 waveforms, multi-trace display
Composite waveform editing Pass Fail judgment
Report creation
Layout selection Seven types of templates
Layout editing Set and edit displayed items
Preview window Set and edit displayed content
Report output Printing, PDF file, Excel file
Multi-Fiber Project Editor
File load File type: MPJ, MPZ
File create, save File type: MPJ
Set/edit Analysis Setup, Other Setup, Group Settings
Others
Utility MPZ Converter, Trace Table
OTDR Apps Yokogawa OTDR Remote Controller, File Transfer

* When an SOZ or MPZ file is loaded, the SOR files contained within are loaded. When an MPJ file is loaded, the associated SOR files are loaded.

 

System Requirement

PC Clock speed Speed at which the operating system can run smoothly
Storage Free space of at least 10 GB
Memory size At least 4 GB (at least 8 GB recommended)
* Continuous output and continuous printing of reports may require large amounts of
memory. If there is not enough memory, the software may not run properly.
Display Resolution: 1600×900 or higher
Disk drive CD-ROM drive (if you purchased the standard version with CD)
OS Windows 7 (Service Pack1 or later)
Windows 8/8.1
Windows 10

 

Supported models

Series name Model name firmware
version
AQ7270 series 735020, 735021, 735022, 735023, 735024, 735025, 735026, 735027, 735028, 735029, 735030 R2.03 and later
AQ7275 series 735031, 735032, 735033, 735034, 735035, 735036, 735037, 735038, 735040, 735041 R3.08 and later
AQ1200 series AQ1200A, AQ1200B, AQ1200C, AQ1200E, AQ1205A, AQ1205E, AQ1205F R3.03 and later
AQ7280 series AQ7282A, AQ7283A, AQ7284A, AQ7285A, AQ7283E, AQ7283F, AQ7282G, AQ7283H,AQ7284H, AQ7283J, AQ7283K, AQ7282M R2.05 and later
AQ7277 series AQ7277, AQ7277B R1.01 and later
AQ1000 series AQ1000 R1.03 and later
AQ1210 series AQ1210A, AQ1215A, AQ1210D, AQ1210E, AQ1215E, AQ1215F, AQ1216F R1.03 and later

 

Available Languages

English, Japanese, Chinese, Korean, German, French, Polish, Russian, Indonesian

Up to 1000 waveforms can be loaded

You can load SOR ※1or SMP※2 files and save the results of editing events and markers to files. In the case of SOR files, up to 1000 waveforms can be loaded and up to 10 waveforms can be displayed. In the case of SMP files, up to 10 waveforms can be loaded and displayed.
※1:SOR is a file for saving waveform data (including measurement conditions) of real-time measurements and averaged measurements performed on the OTDR.
※2:SMP is a file for saving adapt waveform data (including measurement conditions) of averaged measurements performed using the OTDR Smart Mapper.

Up to 1000 waveforms can be loaded

 

Batch processing of analysis conditions for multiple waveforms

This feature assigns the following settings collectively to multiple waveforms.

  • Event, marker, event search conditions, event analysis conditions, pass fail conditions, print range
  • Labels

Collective event analysis

 

Create a work report in 3 steps

You can export the loaded waveform’s optical pulse measurement and analysis conditions, waveforms, and events as a report on a single sheet. The 3 steps to export a report are 1: load of a file, 2: display the report preview window, 3: export. It is possible to load multiple files and create multiple reports with the same layout.
You can also choose which items to include in the report.

Create a work report in 3 steps

 

Analysis window

Marker analysis

 

One way analysis

Marker analysis

You can place markers on waveforms and analyze the following measurement values.

  • Distance, splice loss, return loss, return loss between markers (section analysis)

Marker analysis

 

Event analysis

Event analysis information (connections, splices, etc.) of loaded SOR files are displayed. The splice loss or return loss is displayed for each event. If events cannot be detected or if noise is detected as events, you can use the event edit feature to change the threshold for detecting various values to make adjustments to events.

AutoSearch

If event analysis information is not available in an SOR file measured on an OTDR, you can set analysis conditions on the software and execute an auto search.

 

two-way analysis (2way analysis)

Waveform events that have been measured from optical fiber cable end A to end B and those measured from end B to end A can be combined. This combination enables displaying of events that could not otherwise be measured because of dead zones. You can save the analysis results in CSV format.

two-way analysis (2way analysis)

Execute 2way Analysis

 

SMP file analysis

When files in SMP format saved on an OTDR with the Smart Mapper feature is loaded, a composite waveform is displayed. You can edit the composite waveform by moving the line (division line) indicating the combined target waveform section of each pulse width. The smart mapper function repeats optical pulse measurements on the same wavelength using different pulse widths to combine waveforms in order to compensate for measurement accuracy degradation.
* The number of measurements and pulse widths vary depending on the OTDR model and the distance range and wavelength set at the time of measurement.

SMP file analysis

Editing Waveforms

 

Multi-fiber project editor

The Multi-Fiber Project Editor can create project files to be loaded and used in the multi-fiber measurement feature of the OTDR. A project file contains multi-fiber information and other measurement conditions.

 

View a fiber surface image

You can check the screen image data by the fiber inspection probe function of OTDR

View a fiber surface image

 

Yokogawa OTDR remote controller

You can connect an OTDR to a PC through an Ethernet or Wi-Fi or USB interface and remotely control the OTDR from the PC. Once the Yokogawa OTDR Remote Controller OTDR is started up on your PC, the control panel is displayed on the PC so that you can remote-control the OTDR as if you do the same on the OTDR itself.
※The connection method depends on the product. Please check the introduction page of each product.

 

File transfer

You can connect an OTDR to a PC through an Ethernet or USB interface and exchange waveform data files.

 

Comparison with conventional software

  AQ7933 AQ7932
Analysis
Waveform Analysis
2way Analysis
Master event setting
Batch processing  
Trace table view  
Report generation
1 Trace Report
2 Traces Report
4 Traces Report
6 Traces Report
8 Traces Report
Total table
Summary table  
Report layout edit  
Other Applications
Multi-Fiber Project Editor
Remote Controller  
 

Looking for more information on our people, technology and solutions?


Contact Us
 
Top