Use the CAN/LIN bus monitor module to decode the CAN or LIN-Bus signals and display information on physical data like engine temperature, vehicle speed and brake-pedal position as analog waveforms and compare this with the data coming from real sensors.
Applicable to Yokogawa ScopeCorder DL850V & DL850EV, DL350 ScopeCorder (/VE option), DL950 (/VCE option) ScopeCorder Vehicle Edition only.
Input Ports | CAN port: 1, LIN port: 1 |
---|---|
Maximum sampling rate | Isolation between a port and main body and between ports |
LIN port specifications | 100 kS/s (60-CH x 1 kS/s per port) |
Maximum input voltage | -1 V to +18 V (LIN input to GND) |
LIN supply voltage input range | 7 V to 18 V |
Maximum allowable common mode voltage | 30 Vrms (CAT I and CAT II) |
Input connector | D-sub 9-pin (male) |
Supported protocol | Physical layer: ISO-9141 |
Supported baud rate | 2400, 9600, 19200bps |
Supported data length | 4 bytes maximum |
Input channels | 60 signals/port |
Supported data field checksum | Standard and extended checksums |
CAN port specifications | Compliant with CAN Bus Monitor Module (720240) |
Weight | Approx 250 g |
This module is available for DL850V only. Max. two (2) modules including the 720240 module can be installed.