Is it avalable that series or parallel connection of source/measure unit GS610/GS820?

The GS610/GS820 output is insulated from the cover case. Therefore, if you want to amplify the output voltage more than 1 unit (or 1 ch) you must connect the system in series. If you want to increase the output current by more than 1 unit (or 1 ch) you must connect the system in parallel. (Provided that it is within a range of maximum voltage/current or those limiter)
However, in case of a parallel connection in voltage output or series connection in current, a protection circuit may prevent normal operation and accuracy. Yokogawa cannot guarantee the operation or accuracy when there is a parallel connection in the voltage terminals or a series connection in the current terminals.
The attached file provides a detailed explanation for each case.

Related Products & Solutions

GS200 DC Voltage / Current Source

The GS200 is a low voltage/current DC source with high accuracy, high stability, and high resolution.



GS610 Source Measure Unit

The GS610 is made up of a programmable current and voltage source, a voltmeter, and an ammeter. Each function can be combined into numerous operation modes.

GS820 Multi Channel Source Measure Unit

The GS820 is a highly accurate and highly functional 2-channel programmable DC voltage/current source that incorporates voltage/current generation and measurement function.

Signal Generators, Sources and Supplies

For general purpose standalone applications or as core components in a high speed test and measurement system, Yokogawa sources and signal generators are highly accurate and functional.

Source Measure Units

A Source Measurement Unit (SMU) is a flexible test instrument which is capable of both sourcing and measuring voltage and/or current at the same time.